• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.344-351
• /
• 2005

This study compared the microshear bond strength $({\mu}SBS)$ to end and side of enamel rod bonded by four adhesives including two total etch adhesives and two self-etch adhesives. Crown segments of extracted human molars were cut mesiodistally. The outer buccal or lingual surface was used as specimens cutting the ends of enamel rods, and inner slabs used as specimens cutting the sides of enamel rods. They were assigned to four groups by used adhesives: Group 1 (All-Bond 2), Group 2 (Single Bond), Group 3 (Tyrian SPE/One-Step Plus), Group 4 (Adper Prompt L-Pop). After each adhesive was applied to enamel surface, three composite cylinders were adhered to it of each specimen using Tygon tube. After storage in distilled water for 24 hours, the bonded specimens were subjected to ${\mu}SBS$ testing with a crosshead speed of 1 mm/minute. The results of this study were as follows: 1. The $({\mu}SBS)$ of Group 2 $(16.50\pm2.31 MPa)$ and Group 4 $(15.83\pm2.33 MPa)$ to the end of enamel prism was significantly higher than that of Group 1 $(11.93\pm2.25 MPa)$ and Group 3 $(11.97\pm2.05 MPa)$ (p<0.05). 2. The $({\mu}SBS)$ of Group 2 $(13.43\pm2.93 MPa)$ to the side of enamel prism was significantly higher than that of Group 1 $(8.64\pm1.53 MPa)$, Group 3 $(9.69\pm1.80 MPa)$, and Group 4 $(10.56 \pm1.75 MPa)$ (p<0.05), 3. The mean $({\mu}SBS)$ to the end of enamel rod was significantly higher than that to the side of enamel rod in all group (p<0.05).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.1
• /
• pp.15-25
• /
• 2022

This study was conducted to provide useful basic data for restoration and maintenance of the Changdeokgung Palace(昌德宮)'s inner palace area in the future by exploring the background of terraced flower beds installed in the front space of Seunghwaru(承華樓) and grasping the reality before and after terraced flower beds were installed. The main results of this study can be summarized as follows. First, in the early 1900s, the front space of Seunghwaru formed a relatively higher terrain than the Nakseonjae(樂善齋) area. In addition, along the topography of high north and low south, a yard surrounded by Haenggak(行閣) and a rectangular open space connected to the West Haenggak of Nakseonjae were created. In particular, the rectangular open space was a staircase-type slope in which rectangular stone columns were arranged at regular intervals. Second, the terraced flower beds of Seunghwaru originated from the renovation of the new building of Nakseonjae West Hanggak, which was implemented in the late 1920s. This is because in order to secure enough available land for construction and auxiliary space during the renovation of the new building, the terraced flower beds for topographic treatment was created along the cutting area after cutting off the original topography of the front space of Seunghwaru. Third, after the construction of the terraced flower beds, many deformation occurred in the topographic features of the front space of Seunghwaru. The front yard of Seunghwaru was relatively higher than the Nakseonjae area, but most of them were cut off and disappeared as the terraced flower beds were created. The staircase-type also disappeared after the construction of the new building and terraced flower beds. The stylobate and front fence of Seunghwaru were newly built along the alignment of terraced flower beds and the unique style of narrow gate and auxiliary stairs were also relocated to the new fence.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.88-95
• /
• 2010

The purpose of this study was to compare the root canal shaping ability of 4 rotary NiTi instruments in simulated root canals. For the preparation of thirty two curved root canals, Mtwo instruments using "single length"technique, and Profile, ProTaper Universal, and K3 using crown-down technique (N = 8) were used. All canal samples were prepared by reaching an apical canal size of #30. Pre- and post-instrumentation digital images were recorded and an assessment of canal shape was determined using a computer image analysis program SigmaScan Pro (Systat Software Inc., San Jose, CA, USA). The changes of the dimension of inner walls of canals, (2) the changes of the dimension of outer walls of canals, and (3) the centering ratio were measured at 7 measuring points, and then data were statistically analyzed using one-way ANOVA and Duncan's test. The results were as below; 1. The root canal shaping ability of Profile was significantly faster than that of other rotary NiTi instruments (p < 0.05). 2. The deformation and fracture of all instruments used for this study were not experienced. 3. In the degree of changes of the dimension of inner walls of canals, Profile demonstrated the lowest changes of the dimension of inner walls of canals except at the measuring points of the 1 and 2 mm (p < 0.05). However, the ProTaper Universal showed the highest changes of the dimension of inner walls of canals at all measuring points (p < 0.05). 4. In the degree of changes of the dimension of outer walls of canals, Mtwo demonstrated the lowest changse of the dimension of outer walls of canals except at the measuring point of the 1 mm (p < 0.05). However, Profile exhibited the highest changes of the dimension of outer walls of canals at the measuring points of 3 and 4 mm and ProTaper Universal and K3 showed the largest changes of the dimension of outer walls of canals at the measuring points of 1, 2, 6, and 7 mm (p < 0.05). 5. In degree of centering ratio, Profile demonstrated the least centering ratio comparing with the centering ratio shown by other NiTi instruments at the measuring points of 1, 4, 5, and 6 mm. Results suggest that in the coronal part of canal preparation, active cutting files such as ProTaper Universal may efficiently flare the canal orifice and form a better taper, and in the apical part of the canal, files which have a better centering ability such as Profile may maintain the original canal curvature and reduce the shaping time.

• Korean Journal of Human Ecology
• /
• v.21 no.3
• /
• pp.551-565
• /
• 2012

The primary goal of this study was to provide a systematic methodology of utilizing 3D technology for tight-fit performance sportswear using information of skin deformation in various posture. Technical tools used in this study are Cyberware whole body scanner, RapidForm2004, 2C-AN 3D pattern development program, and YukaCAD. Analysis of the 3D skin deformation while knee joint was bent from $0^{\circ}$ to $60^{\circ}$ revealed that the length of dermatomes L4 was remained consistent during knee bending. Therefore, L4 was chosen as a major cutting line. To develop a highly ergonomic pattern, replicas of static and dynamic postures were developed and integrated using two methods, one is morphing method (Sqirlz Morph), and the other is AutoCAD. Experimental tight-fit garments called 'Derm-Mov Pattern' was designed using dematomes L4, L2, and inner line under knee and compared with four other patterns. As results, AutoCAD was appropriate as a integrating method of various postures. In wear test, 'Derm-Mov Pattern' was rated high (p < .001), in terms of pressure comfort especially around front crotch area. However, wear sensation was not signipicantly different in other area due to highly extensible property of materials. Pressure distribution was relatively even in these experimental garments.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1529-1538
• /
• 2013

Disasters like mountain landslides and collapse in cutting areas claim many a life and cause economic losses, involving much effort and expenses for their recovery. This study has surveyed and analyzed incident of disasters that had occurred on the sloping sides in Korea for the past 13 years in an effort to relieve damage caused by disasters on the sloping sides. The analysis confirms that while the major cause of disasters on the sloping side was storms in the past, frequency of disasters on sloping sides caused by local downpour is steadily on the rise. In addition, while disasters were concentrated in Gangwon Province, a mountainous region of the country, frequency of disasters occurring on the sloping sides is steadily increasing recently on the sloping sides in downtown areas in Seoul, Gyeonggi-do and so forth, attributing a large percentage of disasters to sloping sides. Data surveyed and analyzed in this study are thought to be applicable as basic data for the establishment of effective measures for the prevention of disasters occurring on the sloping sides in the days to come.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.2
• /
• pp.55-64
• /
• 2000

In this paper, we propose an efficient datapath placement algorithm to minimize track density. Here, we consider each datapath element as a cluster, and merge the most strongly connected two clusters to a new cluster until only one cluster remains. As nodes in the two clusters to be merged are already linearly ordered respectively, we can merge two clusters with connecting them. The proposed algorithm produces circular linear ordering by connecting starting point and end point of the final cluster, and n different linear ordering by cutting between two contiguous elements of the circular linear ordering. Among the n different linear ordering, the linear ordering to minimize track density is final solution. In this paper, we show and utilize that if two clusters are strongly connected in a graph, the inner product of the corresponding vectors mapped in d-dimensional space using spectral method is maximum. Compared with previous datapath placement algorithm GA/S $A^{［2］}$, the proposed algorithm gives similar results with much less computation time.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.51-72
• /
• 1998

Futurists objected the existent style, that is the conventional fashion, and took part in these disciplines of fashion to make clothes the instruments being able to represent the individuality. Giacomo Balla and fortunato Depero, pain-ters who in 1915 were to work with Diaghilev's company, were the first to see clothing as a dynamic interfaced between th body and the atmosphere, between physical gestures and the urban context, which could be translated into encounters between forms and colours, volumes and architecture. For them, clothing began to exist as an object and an event, something to be removed from a mainly static conception and made mobile, active. The interaction between movement and clothing was based on the relativity of perception : the appearance and disappearance of the body produced points without dimension or duration which served, as Balla wrote in the Futurist Mnaifesto of Men's Clothing to“renew incessantly the enjoyment and impetuous movement of the body”. The historical achievement in the effort for the reformation of Futurist, Art to Wear. First, for Futurist, clothing is removed from a static conception and focused on dynamics. Second, Balla used asymmetry in men's clothing. Moreover he supposed dynamic men's clothes by using optical intersection. Third, the after image of Chronophotograph represented rapidity. This rhythmic expression is the fore-runner in Optical and Kinetic Art of Visual Art. Fourth, Futurist emphasized flexibility in fashion. They aimed to create‘Clothing Machines’whose parts would interact to aceelerate the real and virtual, inner and outer movement of the human being. Fifth, the variety and short life of cutting skills and colors are focused and‘Fast Substance’in fashion is admitted by Futurists. Futurist concern with clothing was not lim-ited its appearance in terms of cut and colour. What important was also the way it appeared and disappeared according to fashion. It was a“fast substance”, able to reflect rapid, sudden changes of social and aesthetic taste. To reach to the aim of internationalization, Gesamtkunstwerk in our Art to Wear, it is extremely meaningful to examine art fashion which is created under the conception of Gesamtkunstwerk production of avang garde artist in the early 20th century and look at formative conscious of truth, goodess and beauty synthetically which they faced on their works of art.

• Journal of Fashion Business
• /
• v.21 no.5
• /
• pp.61-77
• /
• 2017

Fashion companies are increasingly becoming aware of the importance of Digilog as a response strategy to an emotional stimulus, in order to win the hearts of consumers, because the Digilog provides a new type of emotional value. The features of Digilog found in modern fashion are characterized as follows: first, the "Fashion Image of Hybrid Nature" expresses nature in a new light or reinterprets existing expressions of nature, by using cutting-edge technology based on the psychological desire to return to, adapt with, and harmonize with nature. Second, the "Fashion Image of Nostalgia," which exhibits past forms of regressive fashion, is a fashion code that can be understood as a social trend. It has a digital exterior, with retro materials and old perfumes that reflect psychological comfort, as its expressive medium. Third, the "Lifestyle through the Technique of Interaction" is the sharing of information through consumer participation and delivery, or its interaction. Fourth, the "Fashion Design through the Technique of Customizing" allows consumers to actively participate in the design process. It reflects the consumer's desire to personally design fashion products. Fifth, the "Emotion Sharing through the Technique of Storytelling," which focuses on intangible values, is based on the sentiment of communication between the consumer and the brand, thereby satisfying the inner values as well as the aesthetic demands of consumers. This study confirmed that digital fashion, which uses digital technology based on analog sentiments, has opened up a new environment for fashion culture and has also widened the boundaries of fashion.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.417-430
• /
• 2014

A new rock excavation method using an abrasive waterjet system is under development for efficiently creating tunnels and underground spaces in urban areas. In addition, an appropriate abrasive flow rate and abrasive flow quality are important for the new rock excavation (cutting) method using an abrasive waterjet system. This study evaluated the factors influencing the abrasive flow rate and abrasive flow quality, specifically the abrasive pipe height, length, tortuosity and inner diameter, through experimental tests. Based on the experimental test results, this study suggested optimal conditions for the abrasive flow rate and abrasive flow quality. The experimental results can be effectively utilized as baseline data for rock excavation methods using an abrasive waterjet system in various construction locations such as tunnels near urban surroundings, utility tunnels, and shafts.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.19-24
• /
• 2017

In these days, increase requirement of TEM (Transmission Electro Microscope) in not only scientific field but also industrial field. Because TEM can measure inner-structure of specimen a variety of materials like metal, bio. etc. When use TEM, specimen should be thin about 50nm. So making for thin specimen, use Ion milling device that include specimen holder. The holder generally made of Aluminium Aluminium holder is worn away easily. For this reason, using time of ion milling with aluminum holder is too short. To solve the problem, we replace aluminium holer to molybdenum alloy holder. In this paper, we design molybdenum alloy holer for CAM and modify CAD modeling for effective machining process. So we array a specimen 3 by 4 and setup orientation for one-shot machining process. Next we make a CAM program for machining. we making a decision two machining strategy that chose condition of tool-path method, step-down, step-over. etc. And then conduct machining using CNC milling machining center. To make clear difference between case.1 and case.2, we fixed machining conditions like feed-rate, main spindle rpm, etc. After machining, we confirm the condition of workpiece and analysis the problems case by case. Finally, case.2 work piece that superior than case.1 cutting with WEDM because that method can not ant mechanical effect on workpiece.