• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.559-560
• /
• 2006

Inkjet Printing is very attractive method for direct patterns with no masks, In order to Achieve direct printing with nano metal, It is often necessary to print them with highly concentrated Ink We research the High Concentrated silver nano ink. Formulation which has a good thermal stability and storage stability and jet stability using a ethylene glycol ether. Normally Alcohol-based inks can be sensitive But High boiling point ethylene glycol ether base Ink is creating a stable meniscus and minimum maintenance issues. We are reaching a 50~60wt% high Silver Ink using a Hydrophilic Ag Nano powder. (30~50nm)

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.775-777
• /
• 2003

Several methods are available for the fabrication of electrode pattern for the plasma display panel(PDP) including screen printing and photolithographic method. Piezo type ink-jet printing method is considered to the method of choice for electrode patterning in manufacturing of PDP. Both silver ink and absorbent layer paste formulation were developed for ink-jet printing of electrode pattern. The ink-jet printing of silver electrode with preformed absorbent layer was especially suitable for the patterning of address electrode for high resolution PDP.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.7-11
• /
• 2002

The print quality of a ink jet printer is generally affected by three major components of the printing process: printer, ink formulation, and paper. The result of this study indicated that the surface sized paper with oxidized starch and cationic starch differed ink jet print quality in terms of ink spread and black optical density of the print image. Paper properties, like air permeability and siting degree, which may influence the ink jet printing were also measured. It was found that black print quality was controlled by starch level and ionic charge on the paper surface. Cationic surface sizing starch improved black ink jet print quality.

• 한국세라믹학회지
• /
• 제54권6호
• /
• pp.478-483
• /
• 2017

The advantage of ceramic ink-jet printing technology is the accurate and fast printing process of digital images for various products. For digital ink-jet printing applications, ceramic ink requires proper viscosity and surface tension, along with dispersion stability of the inorganic pigments. The purpose of this study is the formulation of an environment-friendly ceramic ink with a water-based system; using nano-sized $CoAl_2O_4$ pigment as a raw material, ink should have dispersion stability to prevent nozzle clogging during ink-jet printing process. In addition, the surface tension of the ceramic ink was optimized with the polysiloxane surfactant according to the surface tension requirement (20 - 45 mN/m) for ceramic ink-jet printing; by adjusting the viscosity with poly ethylene oxide, jetting behavior of the ceramic ink was investigated according to changes in the physical features through drop watcher measurement.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.583-589
• /
• 2017

Ceramic ink-jet printing has become a widespread technology in ceramic tile and ceramicware industries, due to its capability of manufacturing products on demand with various designs. Generally, thermally stable ceramic inks of digital primary colors(cyan, magenta, yellow, black) are required for ink-jet printing of full color image on ceramic tile. Here, we synthesized an aqueous glass-ceramic ink, which is free of Volatile organic compound(VOC) evolution, and investigated its inkjet printability. $CoAl_2O_4$ inorganic pigment and glass frit were dispersed in aqueous solution, and rheological behavior was optimized. The formulated glass-ceramic ink was suitably jetted as single sphere-shaped droplets without satellite drops. After ink-jet printing and firing processes, the printed glass-ceramic ink pattern on glazed ceramic tile was stably maintained without ink spreading phenomena and showed an improved scratch resistance.

• 펄프종이기술
• /
• 제29권3호
• /
• pp.60-68
• /
• 1997

To develop paper coating technology for preventing print mottling, which is recognized as the most common printing problems in using coated papers, ink absorption properties of various coated papers were examined by employing K 8T N and Croda ink absorption tests. The influences of pigment compositions, coat weights and drying methods on these ink absorption properties were examined, and then the variations of ink absorption ratio were analyzed and discussed. It is demonstrated that the variation of Croda ink absorption ratio induced by coat weight variation can be utilized most succesfully to predict print mottling propensity of coating formulations. A systematic analysis approach was suggested that can be employed in the development of the most desirable coating color formulation to achieve target optical properties with the least print mottling.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.101-110
• /
• 2004

The local surface strength variation of coated papers were measured at various speeds on a number of coated paper samples to study the effects of speed and ink tack on coating pick. Coating pick phenomenon is observed in an ink transfer variation curve as a decrease in the slope of the curve. On the other hand, it causes an actual decrease in net ink transfer to paper with an increase in speed. The effect of speed on coating pick depends on ink tack, ink film thickness and surface properties of coating layer formation of paper. A novel device to measure the surface strength can rate the coating paper in a different order. Comparison are made between dry test of coating paper pick and wet coating pick test of printing in IGT printability tester. Coating formulation is the main key to prevent from coating pick. The binder level increases, the coating pick and the slop decrease. The piling on blanket in printing is a problem when the coating pick is occur on a local area rather than average surface strength of coated papers.

• 공업화학
• /
• 제7권4호
• /
• pp.787-793
• /
• 1996

본 논문은 옵셋 잉크가 국내 신문고지의 탈묵에 미치는 영향을 조사하기 위해 국내신문 옵셋잉크의 조성분과, 그들 잉크로 옵셋 인쇄된 시료를 10, 30, 90, 180일 동안 열화시킨 후, 이들의 탈묵성을 비교하였다. 인쇄잉크의 조성분을 다르게 하여 인쇄한 시료는 열화기간이 증가될 수록 수율과 백색도가 감소되었다. 특히 아마인유의 첨가량이 많은 시료의 경우, 열화기간에 따라 많은 수율의 감소와 백색도의 저하를가져왔다. 따라서 아마인유의 첨가량은 탈묵에 결정적인 역할을 한다는 결론을 얻었다. 또한 로진변성페놀수지와 길소나이트가 포함된 시료는 열화과정을 통해 상대적으로 백색도의 감소가 있었다. 강도 측면에서 볼 경우, 열화기간에 따라 대체로 인장지수와 파열지수는 감소하였고, 인열지수는 증가했다. 그러나 아마인유만을 비이클 성분으로 사용한 시료의 경우 다른 시료에 비해 모든 강도가 낮았는데, 이것은 잉크와 섬유간의 강한 가교결합이 형성되어 초지 시 해리가 어렵기 때문이다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.215-225
• /
• 2006

Today's requirements for print-press runnability and print quality demand an optimised absorption and adhesion of printing ink on the paper surface. Modern coating concepts for high glossing offset grades use ultra fine pigments, whereas binder level has continuously been decreased to a minimum in recent years to achieve the highest possible sheet gloss development and for economical reasons. Both the ultra fine pigments and the reduced binder levels lead in many cases to a faster ink setting rate. On the other hand, matt paper grades use relatively coarse pigments leading to a slow ink setting compared to the high glossing papers. Both too fast and too slow ink setting properties implicate drawbacks in print quality and print press runnability. The mechanisms behind the interactions between ink and coating have been presented in many previous publications. The purpose of this study was to determine and quantify how the ink setting rate is influenced by pigment system (GCC and GCC/clay blends), latex level and latex properties in the topcoat of double coated sheet fed offset paper. The roles of binder level and type in the precoat were also assessed. The effect of calendering (temperature and pressure) was studied with one formulation. The resulting ink setting characteristics were tested using three different laboratory testing instruments. The correlation amongst the different laboratory testing methods is discussed. The results show that by varying the latex properties, the pigment system and/or latex addition level, the ink tack development of ink applied to a topcoat pigment system can be significantly influenced. It can be slowed down as often desired with ultra fine pigments or speeded up in the case of coarse pigments. There was no visible effect on the ink setting rate by using different binder systems in the precoat..

• 청정기술
• /
• 제28권4호
• /
• pp.293-300
• /
• 2022

그래핀의 우수한 기계적, 전기적, 열적 성질은 최근 몇 년 동안 여러 연구 분야에서 지대한 관심을 불러일으켰다. 그래핀을 생산하는 대표적인 방법인 습식공정 중 액상박리(liquid-phase exfoliation, LPE)는 초음파 및 높은 전단응력을 이용하여 벌크흑연을 그래핀으로 박리하는 기술이다. 액상박리에 의해 생산된 그래핀 분산액은 그래핀 잉크로 전환되어 그 활용폭을 더 넓힐 수 있는 장점이 있지만 고품질의 그래핀을 생산하고 가격경쟁력을 확보해야 한다. 위 조건을 만족하기 위해서 그래핀을 효율적으로 박리할 수 있는 공정 확보와 더불어 상대적으로 가격이 저렴한 천연흑연 기반의 그래핀 분산액 및 잉크를 생산해야 한다. 본 연구에서는 합성흑연 보다 약 3배 정도 저렴하고 그 크기는7배 이상 큰 천연흑연을 흐름반응기 액상박리 공정을 이용하여 박리를 시도하고 공정의 최적화와 박리된 그래핀의 구조적, 전기적 특성을 분석하였다. 천연흑연 기반 그래핀의 전기적 특성을 분석하기 위해 잉크 정제화 공정을 거쳐 그래핀 잉크를 생산하고 인쇄 장비를 사용하여 그래핀 패턴을 제작하였다. 본 연구를 통해 보다 경제적인 그래핀 분산액 및 잉크를 생산하고 그래핀 인쇄 소자를 개발할 수 있는 방법을 제시할 수 있을 것으로 기대된다.