• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.4989-4992
• /
• 2013

Aim: To compare p16INK4a immunocytochemistry with the HPV polymerase chain reaction in predicting high grade cervical squamous intraepithelial lesions. Materials and Methods: This diagnostic case-control study was conducted from January 2010 until December 2010. We obtained 30 samples, classified according to the degree of cervical intraepithelial neoplasia (CIN): 11 samples for CIN 1, 9 samples for CIN 2, and 10 samples for CIN 3. HPV PCR, p16INK4a immunocytochemistry, and histopathological examination were performed on all samples. Statistical analysis was conducted using SPSS 20.0. Results: In predicting CIN 2-3, we found p16INK4a to have similar specificity and positive predictive value as HPV PCR (95%, 97.2% vs 96.7%), but better sensitivity (87.5% vs 72.5%) and negative predictive value (82.1% vs 67.6%). The most prevalent types of high-risk HPV in our study were HPV 33, 35, 58, 52, and 16. Conclusions: p16INK4a has better diagnostic values than HPV PCR and may be incorporated in the triage of ASCUS and LSIL to replace HPV PCR. Genotype distribution of HPV differs in each region, providing a challenge to develop HPV vaccines based on the epidemiology of HPV in that particular region.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.17-27
• /
• 2006

Paper could be situated in a cooled environment seasonally or regionally otherwise it is forced to be in a controlled circumstance. In this paper, printing problems on a cooled paper are investigated and characterized in terms of paper properties. For this purposes, various kinds of sample are cooled down under a specially designed freezing device and printed for observing their printability. Causes for poor ink transfer on a cooled paper are suggested due to condensation, surface inactivity, and rheological change in ink film. Paperboards with higher amount of binder, thick and/or multi coat layers are more vulnerable to poor ink trap. Severe drying could cause the same effect as that of higher binder formulation. It is shown that more absorptive porous structure is desirable for better ink receptivity in a cooled status. Printing on a dampened surface may be an indicator for ink transferability on a cooled paper. Finally, desirable directions for papermaker and printshop are suggested.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.23-29
• /
• 2008

This study was performed to improve the printability of Hanji using a microbial cellulose from Saprolegnia ferax through investigating the printability of Hanji sized with the mixture of the microbial cellulose and various kinds of sizing agents. Conclusions obtained from the results of this study were as follows. The proper concentration of a microbial cellulose in sizing a printable Hanji with it was 0.5%. In general, there was no remarkable effect but some effect on the opacity and ink density. Hanji was sized with the mixture(5:5) of microbial cellulose(0.5%) and AKD(1.0%). As a result, ink spread was remarkably improved by the girth reduction of ink spot. There was remarkable effect because the mixture(5:5) of a microbial cellulose(0.5%) and CMC(1.0%) improved not only the gloss but also the density and girth of ink spot. Mixing(7:3) with corn starch(3.0%) showed the smallest girth of ink spot among applied sizing agents. Mixing(7:3) with PVA(5.0%) also showed some effect in the density and girth of ink spot.

• Korean Journal of Materials Research
• /
• v.28 no.2
• /
• pp.95-100
• /
• 2018

In this study, $ZrO_2$ ceramic ink was formulated for additive manufacturing three dimensional structure using dispenser printing technique. Ceramic ink with various $ZrO_2$ loading (30, 40, 50vol%) was prepared to evaluate their rheological properties and printability. High $ZrO_2$ loading $ZrO_2$ ceramic ink showed higher elastic modulus and improved shape retention, when the ceramic ink was printed and sintered at $1450^{\circ}C$ for 1h. Microstructural analysis of printed $ZrO_2$ objective indicated that high $ZrO_2$ loading objective showed lower porosity and smaller pore size.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.127-134
• /
• 1984

This study was conducted to evaluate the sealing ability of McSpadden technique compared with lateral condensation and Engine reamer technique, and according to the degree of canal enlargement and the use and nonuse of sealer. Seventy single-rooted teeth were divided into 14 groups and each tooth was enlarged and obturated according to the purpose of this study. Obturated teeth were infiltrated by Indian ink and decalcified and cleared. The apical sealing ability was evaluated by measuring the degree of ink penetration into the canal. The results were as follows: 1. All the teeth filled by lateral condensation using gutta-percha cone and sealer proved better in canal sealing ability than McSpadden technique and Engine reamer technique, showing less ink penetration. 2. In the McSpadden technique, there was less ink penetration detected in using the sealer than not. 3. In all of the experimental methods, the difference of the degree of ink penetration according the degree of canal enlargement could not be accepted. 4. There was no significant difference in ink penetration degree between Engine reamer technique using sealer and McSpadden technique without sealer.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.73-81
• /
• 2011

We manufactured the inkjet printing system for the application into the nano Ag finger line interconnection process in Si solar cells. The home-made inkjet printer consists of motion part for XY motion stage with optical table, head part, power and control part in the rack box with pump, and ink supply part for the connection of pump-tube-sub ink tanknozzle. The ink jet printing system has been used to conduct the interconnection process of finger lines on Si solar cell. The nano ink includes the 50 nm-diameter. Ag nano particles and the viscosity is 14.4 cP at $22^{\circ}C$. After processing of inkjet printing on the finger lines of Si solar cell, the nano particles were measured by scanning electron microscope. After the heat treatment at $850^{\circ}C$, the finger lines showed the smooth surface morphology without micropores.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• Journal of Ceramic Processing Research
• /
• v.18 no.11
• /
• pp.810-814
• /
• 2017

Proton exchange membrane fuel cells (PEMFCs) are some of the most efficient electrochemical energy sources for transportation applications because of their clean, green, and high efficiency characteristics. The optimization of catalyst layer morphology is considered a feasible approach to achieve high performance of PEMFC membrane electrode assembly (MEA). In this work, we studied the effect of the solvent on the catalyst layer of PEMFC MEAs fabricated using the electrostatic spray deposition method. The catalyst ink comprised of Pt/C, a Nafion ionomer, and a solvent. Two types of solvent were used: isopropyl alcohol (IPA) and dimethylformamide (DMF). Compared with the catalyst layer prepared using IPA-based ink, the catalyst layer prepared with DMF-based ink had a dense structure because the DMF dispersed the Pt/C-Nafion agglomerates smaller and more homogeneously. The size distribution of the agglomerates in catalyst ink was confirmed through Dynamic Light Scattering (DLS) and the microstructure of the catalyst layer was compared using field emission scanning electron microscopy (FE-SEM). In addition, the electrochemical investigation was performed to evaluate the solvent effect on the fuel cell performance. The catalyst layer prepared with DMF-based ink significantly enhanced the cell performance (1.2 A cm-2 at 0.5 V) compared with that fabricated using IPA-based ink (0.5 A cm-2 at 0.5 V) due to the better dispersion and uniform agglomeration on the catalyst layer.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.3
• /
• pp.132-139
• /
• 2015

Recently, $p16^{INK4a}$/Ki-67 dual immunostaining has been introduced as a new biomarker protocol for early detection of uterine cervical dysplasia and cancer in liquid-based cytology (LBC). We performed the $p16^{INK4a}$/Ki-67 dual immunostaining using a CINtec$^{(R)}$ PLUS kit in a total of 109 LBC cases of cervicovaginal smear and compared its results with those from LBC, HPV hybrid capture II (HC II) test and histological diagnosis. Expression of $p16^{INK4a}$ and Ki-67 was significantly associated with cases of LSIL or higher in cytological diagnosis and cases of cervical intraepithelial neoplasia (CIN) 1 or higher in histological diagnosis (p<0.001 and p<0.001, respectively). Among forty-six cases of atypical squamous cells of undetermined significance (ASCUS) in LBC, $p16^{INK4a}$ and Ki-67 was expressed in 31 (67.4%), which were positively associated with cases of CIN I lesion or higher in histology. The sensitivity of $p16^{INK4a}$/Ki-67 dual immunostaining for finding lesions of CIN 1 or higher was 89.0%, which was higher than LBC. The specificity was 73.5%, which was higher than that of the HC II test. Based on these results, the $p16^{INK4a}$/Ki-67 dual immunostaining method can be a useful diagnostic marker for improving the sensitivity of LBC and the specificity of HC II test.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.170-189
• /
• 2019

Sochi Heo Ryun (小癡 許鍊, 1808-1893) was a literary artist of Chinese paintings of the Southern School during the late Joseon dynasty and the founder of paintings in the literary artist's style of Jindo County in South Jeolla Province. He was also a professional literary artist who acquired both learning and painting techniques under Choui (a Zen priest) and Kim Jeong-hee's teachings. Heo Ryun's landscape paintings were influenced by Kim Jung -hee. However, his ink orchid paintings, which he began producing in his later years, were not related to the 'Ink Orchid Paintings of Chusa (秋史蘭)'. His ink orchid paintings as a whole drew attention as he followed the old methods but still used rough brush strokes . Ordinary orchids were drawn based on Confucian content. However, his Jebal (題跋) and seal (印章) contain not only Confucian characters but also Taoist and Buddhist meanings. Therefore, it is possible to guess his direction of life and his private world of suffering. Ryun's ink orchid paintings reflected a variety of philosophies and aesthetic sensibilities. He went through a process of stylistic change over time and formed an 'Ink Orchid Painted Thought' in later life. The main characteristic of Sochi's ink orchid paintings is that he formed his own special methods for orchid paintings by mimicking the Manuals of Paintings. He drew orchids with his fingers in the beginning. Then, Jeongseop, Lee Ha-eung, Cho Hee-ryong, and others developed an organic relationship with the painting style of ink orchid paintings. Then in later years, orchid paintings reached the point of 'Picture Painted Thought (寫意畵)'. The above consideration shows that ink orchid paintings, which he produced until the end of his life, were the beginning of his mental vision and will to realize the image of a literal artist.