• The Journal of Engineering Geology
• /
• v.25 no.3
• /
• pp.339-347
• /
• 2015

Riverbank filtration has been suggested as a cost-effective method for improving water quality. However, high concentrations of Fe²⁺ and Mn²⁺ cause problems for the use of water and the maintenance of facilities. We evaluated the effectiveness and efficiency of an Fe²⁺ and Mn²⁺ removal technique based on the in situ injection of highly oxygenated water at a site on the Anseong River, between Anseong City and Pyeongtaek City, Gyeonggi Province. The removal process consists of three steps: injection, resting, and extraction. Results show that the removal efficiency increases with repeated application of the process. The amount of Fe-reduced drinking water satisfying water regulations (limit, 0.3 mg/L Fe) obtained using oxygenated water injection was five times higher than the amount of injected oxygenated water. Levels of Mn²⁺ were also reduced following the injection of oxygenated water.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.4
• /
• pp.250-257
• /
• 2020

Objectives: Palatal infiltration is the most painful and uncomfortable anesthesia technique for maxillary impacted third molar surgery (MITMS). This approach could cause patients distress and aversion to dental treatment. The aim of this study was to evaluate the anesthetic efficacy of a buccal infiltration injection without a palatal injection in MITMS. Materials and Methods: This prospective research study was a crossover split mouth-randomized controlled trial. Twenty-eight healthy symmetrical bilateral MITMS patients (mean age, 23 years) were randomly assigned to two groups. Buccal infiltration injections without palatal injections were designated as the study group and the buccal with palatal infiltration cases were the control group, using 4% articaine and 1:100,000 epinephrine. The operation started after 10 minutes of infiltration. Pain assessment was done using a visual analogue scale and a numeric rating scale after each injection and extraction procedure. Similarly, the success rate, hemodynamic parameters, and additional requested local anesthetic were assessed. Results: The results showed that the pain associated with local anesthetic injections between both groups were significantly different. However, the success rates between the groups were not significantly different. Postoperative pain was not significant between both groups and a few patients requested an additional local anesthetic, but the results were not statistically significant. For hemodynamic parameters, there was a significant difference in systolic pressure during incision, bone removal, and tooth elevation. In comparison, during the incision stage there was a significant difference in diastolic pressure; however, other steps in the intervention were not significantly different between groups. Conclusion: We concluded that buccal infiltration injection without palatal injection can be an alternative technique instead of the conventional injection for MITMS.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.6
• /
• pp.331-341
• /
• 2022

This systematic review evaluates current evidence regarding the feasibility of using needleless jet injection instead of a conventional local anesthetic needle. EBSCO, ProQuest, PubMed, and Scopus databases were used to identify relevant literature published in English from 2005 to 2020. Ten studies were selected. Five of them were randomized clinical trials, 3 case-control studies, and 2 equivalence trials. Using the Critical Appraisal Skills Program checklist, 6 studies scored between 67% and 100%, and 4 studies scored between 34% and 66%. According to Jadad's scale, 2 studies were considered strong, and 8 studies were considered moderate in quality. The results of the 10 studies showed differences in patient preference for needleless jet injection. Needleless injection technique has been found to be particularly useful in uncooperative patients with anxiety and needle phobia. Needleless jet injection is not technique sensitive. However, with needleless jet anesthesia, most treatments require additional anesthesia. Conventional needle anesthesia is less costly, has a longer duration of action, and has better pain control during dental extraction. Needleless jet anesthesia has been shown to be moderately accepted by patients with a fear of needles, has a faster onset of action, and is an efficient alternative to conventional infiltration anesthesia technique.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2021

Background: Inferior alveolar nerve block (IANB) using lidocaine 2% is commonly used for anesthetizing primary mandibular molars; however, this technique has the highest level of patient discomfort compared to other local anesthesia techniques. Therefore, alternative anesthesia techniques are necessary. The aim of this study was to evaluate the efficacy of a single buccal infiltration of 4% articaine with IANB using 2% lidocaine, for the bilateral extraction of primary mandibular molars. Methods: The present study was conducted on 30 patients aged between 6 and 9 years, who required the extraction of bilateral primary mandibular molars. The patients were randomly divided into two groups as follows: In the first session, Group A received IANB with lidocaine 2% and group B received infiltration with articaine 4%. In the second session, another injection method was performed on the opposite side. The Wong-Baker Facial Pain scale (WBFPS), Face Leg Activity Cry, and Consolability (FLACC), and physiologic parameters were used to assess pain perception. Results: The independent t-test showed no statistically significant difference in blood pressure and heart rate before and after extraction (P > 0.05). The mean FLACC index in the lidocaine and articaine groups was 0.89 and 1.36, respectively; there was no statistically significant difference between them (P > 0.05). According to the results of the chi-square test, there was no statistically significant difference between the groups for WBFPS (P > 0.05). Conclusion: The articaine infiltration technique may be an alternative to the IANB for the extraction of primary mandibular molars.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.1
• /
• pp.9-17
• /
• 2020

Background: This study aimed to compare the pain levels during anesthesia and the efficacy of the QuickSleeper intraosseous (IO) injection system and conventional inferior alveolar nerve block (IANB) in impacted mandibular third molar surgery. Methods: This prospective randomized clinical trial included 30 patients (16 women, 14 men) with bilateral symmetrical impacted mandibular third molars. Thirty subjects randomly received either the IO injection or conventional IANB at two successive appointments. A split-mouth design was used in which each patient underwent treatment of a tooth with one of the techniques and treatment of the homologous contralateral tooth with the other technique. The subjects received 1.8 mL of 2% articaine. Subjects' demographic data, pain levels during anesthesia induction, tooth extractions, and mouth opening on postoperative first, third, and seventh days were recorded. Pain assessment ratings were recorded using the 100-mm visual analog scale. The latency and duration of the anesthetic effect, complications, and operation duration were also analyzed in this study. The duration of anesthetic effect was considered using an electric pulp test and by probing the soft tissue with an explorer. Results: Thirty patients aged between 18 and 47 years (mean age, 25 years) were included in this study. The IO injection was significantly less painful with lesser soft tissue numbness and quicker onset of anesthesia and lingual mucosa anesthesia with single needle penetration than conventional IANB. Moreover, 19 out of 30 patients (63%) preferred transcortical anesthesia. Mouth opening on postoperative first day was significantly better with intraosseous injection than with conventional IANB (P = 0.013). Conclusion: The IO anesthetic system is a good alternative to IANB for extraction of the third molar with less pain during anesthesia induction and sufficient depth of anesthesia for the surgical procedure.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.4
• /
• pp.345-355
• /
• 2021

Background: This study aimed to evaluate the efficacy of external vibrating devices and counterstimulation on a child's dental anxiety, apprehension, and pain perception during local anesthetic administration. Methods: This was a prospective, randomized, parallel-arm, single-blinded interventional, clinical trial. One hundred children aged 4-11 years, requiring pulp therapy or extraction under local anesthesia (LA), were recruited and allocated equally into two groups (1:1) based on the interventions used: Group BD (n = 50) received vibration using a Buzzy^® device {MMJ Labs, Atlanta, GE, USA} as a behavior guidance technique; Group CS (n = 50) received counterstimulation for the same technique. Anxiety levels [Venham's Clinical Anxiety Rating Scale (VCARS), Venham Picture Test (VPT), Pulse oximeter {Gibson, Fingertip Pulse Oximeter}, Beijing, China)] were assessed before, during, and after LA administration, while pain perception [Wong-Baker Faces Pain Rating Scale (WBFPS), Visual Analogue Scale (VAS)] was evaluated immediately after injection. Statistical analysis was performed using the Student's t-test to assess the mean difference between the two groups and the repeated measures ANOVA for testing the mean difference in the pulse rates. Statistical significance was set at P < 0.05. Results: Significant differences in mean pulse rate values were observed in both groups. In contrast, the children in the BD group had higher diminution (P < 0.05), whereas the mean VCARS and VPT scores were conspicuous (P < 0.05). Based on the mean WBFPS and VAS scores, delayed pain perception after LA injection was more prominent in the BD group than in the CS group. Conclusion: External vibration using a Buzzy^® device is comparatively better than counterstimulation in alleviating needle-associated anxiety in children requiring extraction and pulpectomy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.54-71
• /
• 1990

The fabrication of ceramic machine components by injection molding(CIM : Ceramic Injection Molding) is critically dependent on the shaping and binder extraction techniques. Injection molding is of keen interest to ceramic industries because CIM is suitable for making an intricate shape and manufacturing cost is lower than other process when production scale is large. The success of the molding process is dependent on the correct formulation of the organic vehicle and the achievement of optimum filler loading. Fine alumina powders and polyethylene binder systems were employed to prepare moldable blend then produce a simple specimen by compression molding. Flow characteristics of the mixture was evaluated by viscosity measurement. Optimum binder system and ceramic volume loading for injection molding were determind. A good debinding technique was utilized to improve the quality of debinded parts and save the debinding time. The simple ceramic part was successfully sintered after debinding and its microstructure examined with SEM revealed good consolidation.

• Clinical and Experimental Reproductive Medicine
• /
• v.30 no.2
• /
• pp.119-126
• /
• 2003

Objective: This study was carried out to compare the clinical outcomes of intracytoplasmic sperm injection (ICSI) in patients with obstructive azoospermia according to sperm retrieval site and technique; microsurgical epididymal sperm aspiration (MESA), percutaneous epididymal sperm aspiration (PESA), testicular sperm extraction by open biopsy (TESE). Methods: The outcomes of ICSI and IVF-ET were evaluated and compared among 3 groups. Seventy three men suffering from infertility due to obstructive azoospermia had 107 ICSI cycles using MESA (21 cycles in 15 patients), PESA (26 cycles in 17 patients) and TESE (60 cycles in 41 patients). Results: In the clinical outcomes in patients undergoing ICSI with epididymal or testicular sperm, there were no significant differences in fertilization rate (66.1% vs. 60.5%), cleavage rate (94.9% vs. 97.6%), cumulative embryo score (CES) (51.3 vs. 58.8), implantation rate (7.9% vs. 6.1), and clinical pregnancy rate per ET (30.4% (14/46) vs. 25.4% (15/59)) between both groups. Also, in the clinical outcomes in ICSI patients using MESA, PESA, TESE, there were no significant differences in fertilization rate (61.8%, 69.4%, 60.5%), cleavage rate (92.1%, 97.3%, 97.6%), CES (38.1, 52.0, 58.8), implantation rate (9.5%, 6.6%, 6.1%), and clinical pregnancy rate per ET (35% (7/20), 26.9% (7/26), 25.4% (15/59)) among 3 groups. Conclusion: When compared with MESA or TESE, PESA, the clinical outcomes were similar in ICSI patients with obstructive azoospermia whatever the origin or the technique of sperm retrieval. However, we considered PESA is more time-saving and cost effective for ICSI in patients with obstructive azoospermia.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.4
• /
• pp.197-204
• /
• 2018

Pain control by means of local anesthesia is an intrinsic part of clinical practice in dentistry. Several studies evaluated intraligamental anesthesia using a computer-controlled anesthetic device in children. There is a need to provide a clinical guide for the use of computerized intraligamental anesthesia in children. Intraligamental anesthesia using a computer-controlled anesthetic device was found to cause significantly lower pain perception scores and lower pain-related behavior than traditional techniques. This device proven to be effective in restorative and pulp treatment in children; however, its effectiveness in primary teeth extraction is controversial. It is important to withdraw recommendations necessity of future studies concerning the side effects of computerized intraligamental anesthesia in children. The present study aims to review different clinical aspects of computerized intraligamental anesthesia in children along with the side-effects, type of local anesthesia and postoperative pain of this technique. This study provides dentists with a clinical guide for the use of computerized intraligamental anesthesia.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.135-141
• /
• 2009

Fracturing technique using fluid injection into the borehole is widely used technology in the industry for the geothermal heat, oil, and gas extraction. Dealing with fluid-driven natural fractures such as dike and vein indirectly, design technology would be improved by adapting their principles. In this paper, mechanical interaction between the segments is evaluated by modeling highly segmented and closely spaced fluid-driven natural fractures. The number of segments is 71 with 3,339 measured apertures in which the interaction is considerably predicted. To evaluate mechanical interaction, boundary collocation method is used and the net pressure is calculated by using least square method to fit measured apertures. As a result, in case that mechanical interaction is considered, two pressures as fitting parameters are sufficient to capture measured apertures.