• The Journal of Korean Physical Therapy
• /
• 제15권3호
• /
• pp.189-201
• /
• 2003

The purpose of this study was to know the effect of aquatic-exercise on muscle atrophy which induced by steroid injection. The forty-eight Sparague-Dawley adult male rats were assigned to the 4 groups; Group I (distilled water injection), Group II (steroid injection), Group III (distilled water injection with aquatic exercise), Group IV (steroid injection with aquatic exercise). We observed their body weight, muscle relative weight, myofibrillar protein content. The results of this study were as follows; 1. Body weight was decreased rapidly on steroid injection groups in comparison with distilled water injection groups after 2 weeks (p<0.01), but that was almost recovered as before test on steroid injection group with aquatic exercise. 2. The relative weight of gastrocnemius muscles was decreased on steroid injection groups in comparison with distilled water injection groups. however, Decrease of it on steroid injection group with aquatic exercise for steroid injection group was fallen. There was very significant difference after 4 weeks (p<0.01). 3. Myofibrillar protein content of gastrocnemius muscles was decreased on steroid injection groups in comparison with distilled water injection groups. however, Decrease of it on steroid injection group with aquatic exercise for steroid injection group was fallen. There was significant difference after 4 weeks (p<0.05).

• 한국분무공학회지
• /
• 제27권4호
• /
• pp.181-187
• /
• 2022

For carbon neutrality, direct-injection hydrogen engines are attracting attention as a future power source. It is essential to estimate the transient injection rate of hydrogen for the optimization of hydrogen injection in direct injection engines. However, conventional injection rate measurement techniques for liquid fuels based on the injection-induced fuel pressure change in a test section are difficult to be applied to gaseous fuels due to the compressibility of the gas and the sealing issue of the components. In this study, a momentum flux measurement technique is introduced to obtain the transient injection rate of gaseous fuels using a force sensor. The injection rate calculation models associated with the momentum flux measurement technique are presented first. Then, the volumetric injection rates are estimated based on the momentum flux data and the calculation models and compared with those measured by a volumetric flow rate meter. The results showed that the momentum flux measurement can detect the injection start and end timings and the transient and steady regimes of the fuel injection. However, the estimated volumetric injection rates showed a large difference from the measured injection rates. An alternative method is suggested that corrects the estimated injection rate results based on the measured mean volumetric flow rates.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.53-67
• /
• 2001

본 연구에서는 침하가 발생한 연약지반에 대하여 저유동성 몰탈에 의한 주입공법인 CGS공법의 적용성과 침하억제 효과를 확인하기 위하여 시험시공을 실시하고 그 결과를 분석하였다. 시험시공 현장은 파일에 의하여 지지된 기 시공 된 아파트의 주변지반으로서 사전에 sand drain공법으로 지반에 대한 처리를 실시하였으나 이후에도 지속적인 침하가 발생하고 있는 연약지반이다. CGS주입 전. 후의 지반개량특성을 파악하기 위하여 현장 및 실내토질시험과, 주입시공 중 거동특성을 파악하기 위하여 계측관리와 FDM해석을 실시하였다. 분석결과 연약지반의 지반침하 방지를 주목적으로 하는 CGS공법은 지반조건에 적합한 설치직경, 간격, 심도, 주입재, 주입압 등 다양한 조건으로부터 시공관리가 가능하며, 따라서 설치된 CGS구체는 파일의 지지효과와 더불어 주변지반을 압축강화시켜 복합적으로 지반을 개량시키므로 N치가 평균 2.1 증가하는 등 지반의 지지력 증대 및 침하억제에 효과가 있었다. 또한 적용성 있는 다양한 현장에 일반적으로 사용하게 될 경우 개량효과와 더불어 경제성이 확보될 수 있을 것으로 기대된다.

• 한국지반신소재학회논문집
• /
• 제18권3호
• /
• pp.79-88
• /
• 2019

본 연구에서는 도로노면 하부 지반에서 발생한 공동의 확장특성을 평가하기 위하여, 지하수주입 실험을 수행하였다. 즉, 공동체적에 비례한 일정량의 물을 단계별로 주입하고, 주입한 물이 배출됨에 따라 확대되는 공동을 모니터링 함으로써, 공동의 체적변화를 확인하였다. 실험결과, 지하수 주입에 따른 공동의 체적은 증가하다 수렴 또는 감소하는 경향을 나타냈다. 이는 지하수 주입 시, 공동이 확장되는 과정에서 주변의 이완된 지반이 일부 붕괴되거나 세립토가 주변 지반의 간극을 채우기 때문인 것으로 분석되었다. 또한 지하수 주입 단계에 따른 공동의 체적변화와 확장특성을 분석한 결과, 실험대상 공동은 횡방향으로 확장되는 것을 확인할 수 있었다. 그리고 지하수 유동에 따라 이완된 공동 주변지반이 붕괴되고, 붕괴된 토사가 공동하부의 지중으로 유실되는 과정이 반복됨으로써 공동이 확장되는 것으로 평가되었다.

• Journal of Acupuncture Research
• /
• 제27권1호
• /
• pp.65-74
• /
• 2010

Objectives : This study was to investigate the effects of Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi Pharmacopuncture on autonomic nervous system with Heart Rate Variability(HRV). Purpose of the trial was to observe what influence Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi pharmacopuncture have on the autonomic nervous system. Methods : 40 healthy male volunteers were divided into two experimental groups, such as Cervi Pantotrichum Cornu Pharmacopuncture group and Bovis calculus Fel Ursi Pharmacopuncture group. Study design was a randomized, double-blind clinical trial. 20 subjects in one experimental group were injected Cervi Pantotrichum Cornu Pharmacopuncture, 20 subjects in other experimental group were injected hydrolyzed Bovis calculus Fel Ursi Pharmacopuncture at GB21(Kyonjong). We measured HRV 7 times : baseline measurement and every 5 minutes for 30 minutes after injection. The SPSS 15.0 for Windows was used to analyze the data by the paired t-test(in group) and independent sample t-test(between the groups). Results A. Time Domain Analysis 1. Analysis of Mean HRV, SDNN and Complexity After injection of Cervi Pantotrichum Cornu Pharmacopuncture, Mean HRV was significantly decreased all the times after injection. SDNN was significantly increased at immediate and 25 minute after injection. Complexity was significantly decreased only at 15 minute after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, Mean HRV was significantly decreased all the times after injection. Complexity was significantly decreased at 15 minutes after injection. 2. Analysis of HRV index, pNN50 After injection of Cervi Pantotrichum Cornu Pharmacopuncture, HRV index was significantly increased immediately after injection. pNN50 was significantly decreased at immediately, 20 and 25 minutes after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, HRV index was significantly increased immediately after injection. pNN50 was significantly decreased at immediate and 25 minutes after injection. B. Frequency Domain Analysis 1. Analysis of Ln(TP), Ln(HF), Ln(LF), Ln(VLF) After injection of Cervi Pantotrichum Cornu Pharmacopuncture, Ln(TP) was significantly increased at immediate and 25 after injection. Ln(HF) was significantly increased all the times after injection. Ln(LF) was significantly increased at 15, 20 and 25 minutes after injection. Ln(VLF) was significantly increased at immediate and 25 minutes after injection. After injection of Bovis calculus Fel Ursi Pharmacopuncture, Ln(TP) was significantly increased at immediately and 25 after injection. Ln(LF) was significantly increased at 20 and 25 minutes after injection. Ln(VLF) was significantly increased at immediate and 25 minutes after injection. Conclusions : We results suggest that Cervi Pantotrichum Cornu Pharmacopuncture and Bovis calculus Fel Ursi Pharmacopuncture in healthy adult men tend to activate the autonomic nervous system and sympathetic nervous system within normal range.

• Clinics in Shoulder and Elbow
• /
• 제23권2호
• /
• pp.80-85
• /
• 2020

Background: Atelocollagen has been studied for restoration of rotator cuff tendon. In this study, we attempted to evaluate the clinical outcome of ultrasound-guided atelocollagen injection in an outpatient clinic for patients with partial rotator cuff tear. Methods: We recruited 42 outpatients who visited our hospital from May 2019 to September 2019. Atelocollagen injection was performed in patients with partial rotator cuff tear diagnosed by magnetic resonance imaging and ultrasound. American Shoulder and Elbow Surgeons (ASES), Constant, Korean Shoulder Score (KSS) and Simple Shoulder Test (SST) scores, and range of motion were assessed before injection and after 2 months. Statistically, we analyzed the clinical results using the Wilcoxon signed-rank test. Results: Finally, 15 patients were enrolled for analysis. There was no significant difference between pre- and post-injection in terms of range of motion, ASES (57.0 vs. 60.4), Constant (56.4 vs. 58.9), KSS (64.6 vs. 68.5), and pain-visual analog scale (4.2 vs. 3.7), except function-visual analog scale (F-VAS; 6.3 vs. 7.1) and SST (6.6 vs. 6.9). A significant difference was found in SST (P=0.046) and F-VAS (P=0.009). According to the ultrasound results at 2 months, we found hyperechoic materials in three of seven patients. The most common complication of atelocollagen injection was post-injection pain (53%, 8/15). Conclusions: Ultrasound-guided atelocollagen injection for partial rotator cuff tear showed no significant change in terms of clinical outcomes, except for F-vas and SST score. Tendon regeneration was not clear due to the remnants of atelocollagen present at 2-month follow-up ultrasound. There seems to be alarming post-injection pain for 2 to 3 days in the patients who received atelocollagen injection in an outpatient clinic.

• 한국분무공학회지
• /
• 제14권1호
• /
• pp.8-14
• /
• 2009

This paper present the diesel fuel spray evolution and atomization performance in a multi-hole nozzle in terms of injection rate, spray evolutions, and mean diameter and velocity of droplets in a compression ignition engine. In order to study the effect of split injection on the diesel fuel spray and atomization characteristic in a multi-hole nozzle, the test nozzle that has two-row small orifice with 0.2 mm interval was used. The time based fuel injection rate characteristics was analyzed from the pressure variation generated in a measuring tube. The spray characteristics of a multi-hole nozzle were visualized and measured by spray visualization system and phase Doppler particle analyzer (PDPA) system. It was revealed that the total injected fuel quantities of split injection are smaller than those of single injection condition. In case of injection rate characteristics, the split injection is a little lower than single injection and the peak value of second injection rate is lower than single injection. The spray velocity of split injection is also lower because of short energizing duration and small injection mass. It can not observe the improvement of droplet atomization due to the split injection, however, it enhances the droplet distributions at the early stage of fuel injection.

• Journal of Periodontal and Implant Science
• /
• 제42권2호
• /
• pp.45-49
• /
• 2012

Purpose: The aim of the present clinical trial was to compare pain during injection of anterior middle superior alveolar (AMSA) technique with that of infiltration injection technique in the maxilla in periodontal flap surgeries of patients referring to the Department of Periodontics, Faculty of Dentistry, Tabriz University of Medical Sciences. Methods: Twenty subjects with an age range of 20 to 40 years were selected for the present study. One side of the maxilla was randomly selected as the test side and the other as the control side using a flip of a coin. AMSA technique was used on the test side and infiltration technique was used on the control side for anesthesia. On both sides 2% lidocaine containing 1:80,000 epinephrine was used for anesthesia. The operator obtained the visual analogue scale for each patient immediately after the injection and immediately after surgery. Data was analyzed using descriptive statistical methods (frequency percentages, means and standard deviations) and Wilcoxon's test using SPSS ver. 13 (SPSS Inc.). Statistical significance was defined at P<0.05. Results: There were no statistically significant differences in pain during injection between the two techniques (P=0.856). There were statistically significant differences in postoperative pain between the two injection techniques (P=0.024). Conclusions: Postoperative pain in AMSA injection technique was less than that in the infiltration technique. Therefore, the AMSA technique is preferable in the periodontal surgeries for the anesthesia of palatal tissues given the fact that it has other advantages, too.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• 한국전자통신학회논문지
• /
• 제14권4호
• /
• pp.787-796
• /
• 2019

본 논문에서는 환자에 링거액 주입 시 주입 완료 상태, 잔여량, 주입 중 상태 및 환자의 긴급 상황 알림 등 링거 주입을 제어하고 상태를 감지하여 이를 무선으로 간호사에 알려주는 링거 주입 IoT 시스템을 위한 설계 및 시험 방안을 제안한다. 이를 위해 링거액 센서 및 스위치, 상태 표시 및 무선 통신 기능을 갖는 회로를 설계하고, 스마트 링거 주입 IoT의 센싱 및 알림 정보를 제어하며, 이를 서버측에 알려 모니터링하기 위한 제어 및 모니터링 알고리즘을 제안한다. 또한 링거 IoT 시스템의 적합성을 시험하기 위해 링거액 감지 시간, 링거액 감지 거리, IoT 모듈 동작 온도, IoT 모듈 입력 파워, IoT 모듈 소비전력, 무선통신 속도 등의 시험기준을 설정하고 시험 결과를 분석한다.