• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.158-164
• /
• 2007

In this study, three types of a novel Trench IGBTs(Insulated Gate Bipolar Transistor) are proposed. The first structure has P-collector which is isolated by $SiO_2$ layer to enhance anode-injection-efficiency and enable the device to have a low on-state voltage drop(Von). And the second structure has convex P-base region between both gates. This structure may be effective to distributes electric-field crowded to gate edge. So this structure can have higher breakdown voltage(BV) than conventional trench-type IGBT(TIGBT). The process and device simulation results show improved on-state, breakdown and switching characteristics in each structure. The first one was presented lower on state voltage drop(2.1V) than that of conventional one(2.4V). Also, second structurehas higher breakdown voltage(1220V) and faster turn off time(9ns) than that of conventional structure. Finally, the last one of the proposed structure has combined the two structure (the first one and second one). This structure has superior electric characteristics than conventional structure about forward voltage drop and blocking capability, turnoff characteristics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.10-16
• /
• 2011

We report on the simulation results of electrical/optical characteristics for nonpolar GaN LED having Mg-doped GaN spacer and quantum barrier, in comparison with those of the typical nonpolar GaN LED. In order to reduce the band-gap energy distortion and conduction-band discontinuity in InGaN/GaN multiple quantum wells(MQWs) of nonpolar GaN LED, and thereby to increase their current-voltage, light output power and emission peak intensity, we applied 6 nm-thick p-type($1{\times}10^{18}\;cm^{-3}$) GaN spacer and GaN QB schemes to the typical nonpolar GaN LED epitaxial structure. As a result, we found that the radiative recombination rate was increased by 23% in MQWs at 20 mA current injection. Also, the forward voltage($V_f$) and the light output power($P_{out}$) were improved by 3.7% and 7%, respectively, for the proposed nonpolar LED epitaxial structure, compared with those of the typical nonpolar GaN LED.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.1
• /
• pp.45-56
• /
• 2002

Objectives: Recently, recombinant FSH (rFSH) has been manufactured using a Chinese hamster ovary cell line transfected with the gene encoding human FSH. Both rFSH and urinary gonadotropin (uFSH) could be used for controlled ovarian hyperstimulation (COH). However, uFSH implies a number of disadvantages, such as batch-to-batch inconsistency, no absolute source control, dependence on large amounts of urine, low specific activity, and low purity. The purpose of this study was to evaluate the efficacy of rFSH in human IVF-ET program. Materials and Methods: A total of 508 infertile women was enrolled in this study. They are classified into rFSH group (n=177) or uFSH group (n=331), and all of them were matched by age and cause of infertility in same period. The $Puregon^{(R)}$ (Organon, Holland) was used as rFSH, and the Metrodin-$HP^{(R)}$ (Serono, Switzeland) and $Humegon^{(R)}$ (Organon, Holland) was used as uFSH. We subdivided the patients into three age groups. The outcomes of IVF-ET program were analyzed using the statistical package for social sciences (SPSS). Results: There was no significant differences in the level of estradiol on hCG injection day, the numbers of retrieved oocytes, matured oocytes, fertilized oocytes, transferred embryos, frozen embryos between the two groups. The total dose (IU) of gonadotropin for COH was significantly lower in the rFSH group compared to uFSH group ($1339{\pm}5491.1$ vs $2527.8{\pm}1075.2$ IU, p<0.001). Clinical pregnancy rate per embryo transfer in the rFSH group showed increasing tendency, compared to the uFSH group, but there was no statistical significance (35.2% vs 29.3%). Our results demonstrated that the relative efficiency of rFSH compared with uFSH is higher in older patients. Conclusions: The ovarian stimulatory effect and clinical outcome of recombinant FSH was similar to that of the urinary gonadotropin. The IVF-ET cycles with significantly lower dose of gonadotropin in rFSH group showed comparable results. Therefore, we suggest that recombinant FSH is more potent and effective than urinary gonadotropin.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.253-262
• /
• 2012

With the aim of remediating soils contaminated by heavy metals and oil, experimental research was conducted to evaluate the optimal design factors for remediation in terms of efficient soil washing methods and processes. The experiments employed absorptiometric analysis and gas chromatography methods to reduce the concentration of heavy metals such as cooper (Cu), lead (Pb), and zinc (Zn), and total petroleum hydrocarbons (TPH) in contaminated soils. The experimental processes consisted of deciding on the washing solution, washing time, and dilution ratio for contaminated soils. A dissolution analysis of heavy metals was then performed by the addition of surfactant, based on the results of the decision experiments, and the injection processes of microbes and hydrogen peroxide were selected. The experimental results revealed that reduction effects in contaminated soils under the experimental conditions were most efficient with hydrochloric acid 0.1 mole, washing time 1 hour, and dilution ratio 1:3, individually. Additional reduction effects for heavy metals and TPH were found with the addition of a washing solution of 1% of surfactant. The addition of microbes and hydrogen peroxide caused a reduction in TPH concentration.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.5-12
• /
• 1992

We have fabricated a-Si:H multilayer for contact-type linear image sensor by means of RF glow discharge decomposition method. The ITO/i-a-Si:H/Al structure has relatively high dark current due to indium diffusion and carrier injection from both electrodes, resulting in low photocurrent to dark current. To suppress the dark current and to enhance interface electric field between ITO and i-a-Si:H film we have fabricated ITO/insulator/i-a-S:H/p-a-S:H/Al multilayer film with blocking structure. The photocurrent of ITO/$SiO_{2}(300{\AA})$/i-a-Si:H/p-a-Si:H($1500{\AA}$)/Al multilayer sensor with 5V bias voltage became saturated at about 20nA under $20{\mu}W/cm^{2}$ light intensity, while the dark current was less than 0.1nA. To increase the light generation efficiency we have adopted ITO/$SiO_{x}N_{y}(300{\AA})$/i-a-Si:H/p-a-Si:H($1500{\AA}$)/Al structure, showing photocurrent of 30nA and dark current of 0.08nA with 5V bias voltage. Also the spectral photosensitivity of the multilayer was enhanced for short wavelength visible region of 560nm, compared with that of the a-Si:H monolayer of 630nm. And its photoresponse time was about 0.3msec with the film homogeneity of 5% deviation.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.185-191
• /
• 2013

The purpose of this study is to improve production efficiency of vitrified-thawed transgenic bovine embryos. Transgenic bovine embryos were produced by injection of FIV-GFP lentiviral vector into perivitelline space of in vitro matured MII stage oocytes, and then in vitro fertilization. EGFP-expressing transgenic bovine blastocysts were cultured in serum-containing and serum-free medium. These blsatocysts were vitrified by pull and cut (PNC) container made with 0.25 cm plastic straw. Results indicate that total developmental rates of normal IVF embryo cultured in serum-containing and-free medium into blastocyst were not significantly different (22.3 vs 21.5%) and those of GFP-expressing transgenic bovine embryo into blastocyst showed no significant difference between serum-containing (13.9%) and-free medium (13.1%). However, developmental rate of GFP transgenic embryo was significantly (P<0.05) lower than its of normal IVF embryos. In additional study, we vitrified GFP transgenic normal bovine blastocysts using PNC vitrification method. Survival rate of vitrified-thawed GFP transgenic blastocyst (23.1%) was significantly (P<0.05) lower than its of normal blastocysts (68.9%). Although, survival rate of vitrified-thawed GFP transgenic blastocyst was lower than its of normal blastocyst, our result may suggested that PNC vitrification method is feasible to cryopreserve transgenic embryos. Our next plan will be the production of GFP express transgenic bovine derived from vitrified-thawed embryos using PNC method.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.115-119
• /
• 2012

Purpose : The initial Breast-Specific Gamma Imaging (BSGI) protocol included bilateral breast imaging with 2 views of each breast-craniocaudal (CC) and mediolateral oblique (MLO). Furthermore, Axillary lymph nodes view can be acquired easily. The most meaningful prognosis factor for prediction of breast cancer is whether or not the breast cancer has metastasized to the lymph nodes. However, axillary view doesn't conduct in clinical. This article collates a diverse data of BSGI and describes technical details to acquire optimal imaging. Materials and Methods : A retrospective review was performed on 343 patients who had undergone BSGI between May 2011 and March 2012. Patients who had undergone BSGI received intravenous injection of 740 MBq (20 mCi) $^{99m}Tc$-sestamibi. Results : The following contents are the technical details for optimal axillary imaging. $^{99m}Tc$-sestamibi should be administered using an indwelling venous catheter or scalp needle followed by 10 cc of saline to flush to reduce extravasation and vascular trapping. After administration, patients raise their arm over their head and exercise with stress ball for 1 full minute. A lead shield attached to the gamma camera is removed and patients axilla is placed as close as possible to the camera at a $90^{\circ}$ angle. A lead apron is placed across the shoulder to reduce background from other organs. Acquisition time is enough for 120 sec~180 sec. Conclusion : If patients undergo bilateral axillary imaging as a standard with CC, MLO views, it could improve cancer treatment. Result of this study could maximize efficiency axillary imaging of breast cancer patients.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

• The Journal of Korean Medicine
• /
• v.28 no.2 s.70
• /
• pp.93-113
• /
• 2007

Objective : To research Trends of studies about anti-inflammation and pain relief, obesity, and safety of herbal acupuncture therapy by analyzing domestic theses, published since 2001, about herbal acupuncture therapy. Methods : Domestic theses, published since 2001, mentioning anti-inflammation or pain relief, obesity, or safety of herbal acupuncture therapy were reviewed and analyzed. These theses were then classified by university, year, and subject. Results : The following results were obtained in this study. 1. Among published theses related to anti-inflammation effects of herbal-acupuncture, studies about arthritis comprised the most part, 52. In theses relating to causes of arthritis, 16 were about adjuvant, which was the most, followed by Type II collagen, LPS and carrageenan. Blood test, reactions of inflammation and revelation of cytokine and immune cellswere methods for evaluating anti-inflammation effect. The tendency of experimental methods was to focus on molecular biologic method. 2. In theses related to pain relief, many clinical attempts with herbal injection were carried out, and Carthami Flos and Scolopendrawere used most. Observing reduction of pain inducing factor and checking behavioral change were methods for evaluating pain relief. 3. In theses related to obesity, research focused on effects in association with spots on the body suitable for acupuncture. There were also attempts comparing effectiveness between single injections and complex injections. Astraball Radix, Angelica Gigantis Radix, Coicis Semen and Taeumjowetang were used. Evaluation of anti-obesity effects were by weight loss, food efficiency, blood lipid profile and evaluation of liver function. 4. In theses related to safety of herbal-acupuncture, Herba Chelidonii Chaenonelis Fructus, Clematis Florida Thunb, Corydalidis Tuber, Paeoniae Radix, and Carthami Flos which marked 2 theses each were most studied. Methods of evaluating safety were mostly by observing liver and kidney functions based on blood test, and by applying herbal injections to clinical treatment. Conclusion : Herbal acupuncture is being used in various ways associating with its anti-inflammation, pain relief and anti-obesity effect. Studies on efficacy and mechanism of herbal acupuncture are being conducted even at the molecular biology level.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.5
• /
• pp.391-398
• /
• 2010

Objective : This study was designed to validate the cell trafficking efficiency of the in vivo bioluminescence image (BLI) study in the setting of transplantation of the luciferase expressing bone marrow-derived mesenchymal stem cells (BMSC), which were delivered at each different time after transient middle cerebral artery occlusion (MCAO) in a mouse model. Methods : Transplanting donor BMSC were prepared by primary cell culture from transgenic mouse expressing luciferase (LUC). Transient focal infarcts were induced in 4-6-week-old male nude mice. The experiment mice were divided into five groups by the time of MSC transplantation : 1) sham-operation group, 2) 2-h group, 3) 1-day group, 4) 3-day group, and 5) 1-week group. BLI for detection of spatial distribution of transplanted MSC was performed by detecting emitted photons. Migration of the transplanted cells to the infarcted area was confirmed by histological examinations. Differences between groups were evaluated by paired t-test. Results : A focal spot of bioluminescence was observed at the injection site on the next day after transplantation by Signal intensity of bioluminescence. After 4 weeks, the mean signal intensities of 2-h, 1-day, 3-day, and 1-week group were $2.6{\times}10^7{\pm}7.4{\times}10^6$. $6.1{\times}10^6{\pm}1.2{\times}10^6$, $1.7{\times}10^6{\pm}4.4{\times}10^5$, and $8.9{\times}10^6{\pm}9.5{\times}10^5$, respectively. The 2-h group showed significantly higher signal intensity (p<0.01). The engrafted BMSC showed around the infarct border zones on immunohistochemical examination. The counts of LUC-positive cells revealed the highest number in the 2-h group, in agreement with the results of BLI experiments (p<0.01). Conclusion : In this study, the results suggested that the transplanted BMSC migrated to the infarct border zone in BLI study and the higher signal intensity of LUC-positive cells seen in 2 hrs after MSC transplantation in MCAO mouse model. In addition, noninvasive imaging in real time is an ideal method for tracking stem cell transplantation. This method can be widely applied to various research fields of cell transplantation therapy.