• 대한의용생체공학회:의공학회지
• /
• 제27권5호
• /
• pp.267-273
• /
• 2006

Numerical analysis was performed on the enzyme transport and the flow fields in order to predict the effectiveness of urokinase injection regimens in clot dissolution. The species and momentum transport equations were numerically solved for the case of uniform perfusion of enzyme into a fibrin clot for an arterial thrombus and a deep vein thrombus models. In order to predict the thrombus lysis efficiency of continuous and forced intermittent injections, enzyme perfusion and clot lysis were simulated for the different injection velocities. Intermittent injection showed faster clot lysis compared to continuous perfusion, and lysis efficiency was increased as injection velocity increased.

• 한국전기전자재료학회논문지
• /
• 제27권1호
• /
• pp.50-55
• /
• 2014

It was firstly found in 1st group element. Recently, it has been reported on the improvement of efficiency of the OLEDs by introducing thin layer of some carbonate materials of alkali metal. In order to improve the efficiency of OLEDs which is one of the next generation displays, we have studied the electrical characteristics of the device depending on the thickness ratio of the hole-injection layer to the electron-injection layer. Teflon-AF was used as the hole-injection material, and alkali-metal carbonates of $Li_2CO_3$ were used as the electron-injection materials. To obtain a proper thickness ratio, we manufactured. Four types of devices with the thickness ratio of HIL to EIL were made to be 1 : 4, 2 : 3, 3 : 2, and 4 : 1. The results of electrical and optical properties showed that the device with the thickness ratio of 4 : 1 is the most excellent result. In addition, to prepare a four-layer device by inserting the ${\alpha}$-NPD is a hole transporting material was compared with three-layer element. As a result, the maximum luminance, the maximum luminous efficiency, maximum external quantum efficiency of about 124 [%], 164 [%], 106 [%] improve was confirmed.

• 전기전자학회논문지
• /
• 제24권3호
• /
• pp.706-712
• /
• 2020

유기전기발광소자(Organic light diodes, OLEDs)의 전기발광특성을 향상시키기 위해, 본 논문에서는 용액 공정 정공주입층으로 신규 hexaazatrinaphthylene(HATNA) 유도체들을 도입한 고효율 녹색인광 OLED소자의 특성을 연구하였다. HATNA 유도체는 Indium Tin Oxide(ITO)의 일함수와 비슷한 낮은 the lowest unoccupied molecular orbital(LUMO) 에너지 준위를 가져 다른 개념의 정공주입 메커니즘을 보여주었다. HATNA 유도체를 hole injection layer(HIL)로 사용한 OLED소자들은 HTL로의 정공주입장벽을 효과적으로 감소시키고 발광층 내에 전자와 정공의 균형을 최적화 시켜 외부양자효율이 10.8%에서 15.6%로, 전류 효율은 34.3 cd/A에서 42.7 cd/A로 소자 효율이 크게 향상 되었다.

• 한국분무공학회지
• /
• 제28권1호
• /
• pp.43-48
• /
• 2023

The waste-heat-recovery boiler with water spray (HR-B/WS) applies the heat exchange between the inlet air and exhaust gas with the water spray into the inlet air. The evaporation of water in the inlet air promotes heat recovery from the exhaust gas so that thermal efficiency can be improved by the enhanced condensing effect. The NOx emission can also be reduced by lowering the flame temperature due to the dilution effect of the water. In this study, the validity of this concept is examined by the practical boiler test performed with a 24 kW condensing boiler under the full load condition according to the water injection amount. The theoretical amount of water injection is calculated under the assumption of full evaporation of the sprayed water, which is calculated as 50 g/min. Since the injected water cannot evaporate fully in the actual system, the maximum water spray amount is set as 100 g/min. The results showed that the water injection can increase the thermal efficiency up to 95.59% and reduce NOx and CO emissions simultaneously to 8.9 ppm and 35 ppm at 0% of O₂. Although the heat energy loss increased due to the unevaporated water, the increase in water injection amount caused higher thermal efficiency due to the increased amount of the evaporated water.

• 한국산학기술학회논문지
• /
• 제21권5호
• /
• pp.22-27
• /
• 2020

본 연구는 다수의 사출기가 병렬로 배치된 사출공장의 생산 환경에서 생산성 및 물류효율을 동시에 개선할 수 있는 방법론을 다루고자 한다. 일반적으로 사출공장의 저층부에 위치한 사출기에는 사상 등의 후가공 공정이 연속 배치되어 있고, 후가공을 담당하는 작업자 1~2명이 항시 배치되어 있다. 사출기 앞은 후가공 및 이후 공정으로의 물류 이송작업으로 인해 생산성 저하는 물론이고, 매우 복잡한 물류 흐름이 형성되어 있다. 이에 본 연구에서는 사출기마다 배치되어 있는 후가공 공정을 통합 운영하고, 통합된 후가공 공정에 사출품을 자동 이송하기 위한 컨베이어 구조를 설계하기 위한 방법론을 제안한다. 이를 위해 통합 후가공 공정으로의 투입 컨베이어 구조와 대수를 선정하기 위한 모델 및 각 사출기와 컨베이어를 연결하기 위해 최적의 조합을 찾기 위한 모델을 다룬다. 제안 방법론은 공정의 통합과 물류 방식의 재설계를 통해 생산성을 개선함과 동시에 물류 효율을 높일 수 있는 총합생산성 개선모델이다. 마지막으로 본 연구에서 제안한 방법론을 가전제품 외관에 사용되는 사출품을 생산하는 사출공장을 대상으로 적용하여, 실제 생산 환경에의 적용가능성을 확인함과 동시에 생산성 및 물류효율이 40% 이상 개선됨을 검증하였다.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.61-67
• /
• 2019

The cooling unit of the industrial showcase consists of a compressor, a condenser and an evaporator. An axial fan is used to circulate the air to improve the efficiency of the heat exchanger. In the past, aluminum fans have been used, which have problems such as low performance, efficiency, high failure rate, and high noise. This study is to develop high performance, high efficiency plastic fan replacing aluminum fan. A major factor in determining the performance and noise of an axial fan is the angle and cross-sectional shape of the blade, which is suitable for raising the lift force, thereby controlling the vortex, which is the main cause of noise and performance degradation. In order to produce a high efficiency injection molded fan, it is necessary to develop a mold that minimizes the deformation of the injection process for the designed shape. In this study, we developed a high efficiency, low noise plastic injection fan with more than 11% performance improvement and noise reduction compared to conventional aluminum fan.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.101-102
• /
• 2014

Rising oil price and environmental problems are causing automotive industry to increase fuel efficiency. Improved fuel efficiency in gasoline engine was made possible by development of DISI gasoline engine. Since fuel is injected inside cylinder directly, in-cylinder temperature can be reduced than multi-port injection engine and this leads to increased compression ratio. However, engine performance is largely dependent on mixture formation process due to in-cylinder fuel injection. Especially for spray guided and air guided DISI gasoline engine, injection direction is important factor to mixture preparation. It is because interaction between intake flow and spray affect fuel-air mixture. Hence, in this study, mixture formation characteristics were analyzed by varying injection direction using KIVA 3V release2 code. Residual gas was considered for assuming combustion. Therefore, initial condition for in-cylinder temperature was set equal to the end state of exhaust stroke of combustion cycle. Since angle between intake air flow direction and spray direction affects fluid flow and evaporation field, mixture distribution was affected by fuel injection direction dominantly.

• 상하수도학회지
• /
• 제24권2호
• /
• pp.203-210
• /
• 2010

The signification of calorie/water (C/W) ratio was investigated in the treatment of highly concentrated organic wastes by thermophilic oxic process (TOP). Swine waste was used in this study. When C/W ratio was 1.6, most of swine waste was decomposed and all water was evaporated in the 24-h injection cycle. To improve treatment efficiency of TOP treating swine waste, the effect of shortening the swine waste injection cycle was examined. The shortening of injection cycle was conducted to stimulate the activity of thermophilic bacteria. A high temperature in the reactor was maintained by shortening of the injection cycle. When the swine waste injection cycle was shortened, the C/W ratio was fixed at 1.6. As a result, by shortening the swine waste injection cycle from 24-h to 12 and 6-h, the maximum loading rate of swine waste per day could be improved 1.9 and 3.5 times, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권4호
• /
• pp.49-62
• /
• 1993

It has been a principle research topic on the diesel engine development to increase the efficiency and the performance of engine to satisfy the user's needs for high reliability and durability. However, recently with the worldwide concerns at the global climate change and environmental protection, the main target in the diesel engine research has been changed to solve the exhaust emission problem in order to satisfy the strict emission regulations. To reduce the pollutant for the diesel engine, the researchs on the combustion chamber is the most important and has to be performed first of all. The diesel fuel injection system plays major role to air-fuel mixing process and influences engine output, themal efficiency, reliability, noise, and emissions. The experimental studies were conducted by varying the various parametric conditions and the results were campared with the computation and calculated results by using the fuel injection simulation program developed during previous research. From the experiments, the matching technique of a fuel injection pump and nozzle was conducted to understand under the various parametric conditions. Also, the relations between needle lift and wave propagation characteristics in high pressure pipe were examined. The basic design data from the experimentations and computation works would be applied to actual design works of diesel fuel injection system.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.18-25
• /
• 2018

Both injection and injection molding dies have evolved into advanced technology. Product quality is also evolving day after day. Therefore, the conditions of the injection mold and the injection conditions are becoming important. In order to improve the quality of the product, the Hardware part of the mold has developed as an advanced technology, and the Software part has also developed with advanced technology. This study deals with the cooling part, which is part of the hardware. In addition to fluid cooling, which is commonly used in the industry, by using gas cooling identify the phenomena that appear on the surface of the product and the critical point strain of the product to find the optimal cooling. Electronic parts and automobile parts whose surface condition is important, the cooling process is important to such a degree that they are divided with good products and defective products according to the cooling process at the time of injection. By controlling this important cooling and reducing the injection time with additional cooling, the product quality can be increased to the highest production efficiency. In addition, high efficiency can be achieved without additional investment costs. This study was conducted to apply these various advantages in the field.