1 |
SH. Park, "Investigation into the Development of Uniform and Rapid cooling Mould Incorporating Conformal Cooling Channels," Graduate School of Chosun University. 2010.
|
2 |
K. Park, "Rapid heating / Cooling Technology for High Efficiency Injection Mold Temperature Control," J. of the Korean Society of Mech. Eng. Vol. 51, Issue 4, pp. 37-40, 2011.
|
3 |
Zarkdas, D. M, "Prediction of cooling time in injection molding," Advances in Polymer Technol. Vol. 22, No. 3, pp. 188-208, 2003.
DOI
|
4 |
Menges, "How to make injection molds," HANSER, 2001.
|
5 |
J.H. Choi, D.H. Park, C.H. Park, B.O. Rhee and D.H. Choi, "Design optimization of injection mold for minimizing temperature deviation," Annual Conference Proceedings, KSAE, pp. 2566-2572, 2009.
|
6 |
KJ. Hong, DH. Choi and MS. Kim, "Progressive quadratic approximation method for effective constructing the second-order response surface models in the large scaled system design," Proceedings of KSME(A), Vol. 24, No. 12, pp. 3040-3052, 2000.
|
7 |
S.H. Jeong, J.H. You, "A study on the shrinkage deviation in PC-Collors by the injection molding conditions," J. D&M Eng., Vol. 9, No. 1, pp. 14-17, 2015.
|
8 |
S.W. Ko, S.J. Jeong, "Injection molding 3D CAE applications for estimating filling imbalance using a new runner system meshing," Vol. 6, No. 2, pp. 31-36, 2012.
|
9 |
Y.B. Moon, B.S. Ko, "Injection molding and structure analysis for design of glass insert injection mold," Vol. 2, No. 3, pp. 6-9, 2008.
|
10 |
B.S. No, Y.D. Jeong, "The fluidity and hardness of the recycled thermoplastic elastomer in the injection molding process," J. D&M Eng., Vol. 1, No. 1, pp. 39-44, 2007.
|