• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.595-599
• /
• 2000

Fine wool sheep (n=18) maintained in a tropical environment were allocated to three treatment groups. Estrus was induced with two injections of $PGF_{2{\alpha}}$ (10 mg. im) at 10 days interval. Superovulation treatment started 2 days prior to the second injection of $PGF_{2{\alpha}}$. Each ewe was treated with a total dose of 25 units FSH (Super-OV) i.m. every 12 hover 3 days; Group 2 were also injected i.m. with 200 IU PMSG at the first injection of FSH; Group 3 was treated as in Group 2 and also with GnRH ($4{\mu}g$ Buserelin) at the onset of estrus. The ewes in estrus were mated with a fertile ram. Ovarian examination and recovery of embryo and ova were performed at laparoscopy and laparotomy on day 3 or 4 after mating. Data for onset of estrus, duration of estrus, number of corpora lutea (CL), number of unnovulated large follicle (LF), embryo recovery rate, embryo quality and fertilization recorded for the 3 groups. Ewes in the Group 1 set in estrus later (p<0.05; $50.0{\pm}7.29h$) than the ewes in Group 2 ($24.5{\pm}3.58$) and 3 ($32.5{\pm}3.58h$). The duration of estrus, ovarian size and ovarian response (number of CL and LF) did not differ significantly (p>0.05) among the 3 groups. The proportion of ewes with a superovulatory response (${\geq}2$ CL) was the lowest (50%) in Group 1 treated with FSH alone but ova/embryo recovery (100%) and fertilization (100%) was significantly (p<0.05) higher than Group 2 (58.3 and 85.7%, respectively) and Group 3 (48.6 and 50%, respectively). It is concluded that in tropical fine wool sheep, there is no difference in the 3 treatments for yield of good quality embryos but ovarian response and ovulation rate increased on additional use of PMSG and GnRH respectively to FSH alone.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.2
• /
• pp.163-167
• /
• 2006

Purpose: To evaluate the results of extracorporeal shock wave therapy (ESWT) for patients with chronic proximal plantar fascitis. Materials and Methods: Between April 2005 and April 2006, 35 cases (24 patients) who were followed more than 6 months were evaluated. By $EvoTron^{(R)}$, 2 sessions of ESWT (Group 1: 1200 and Group 2: 1500 shock waves / session of $0.12\;mJ/mm^2$) were performed at 2 weeks interval. The mean age was 40.0 (range, 15-59) years. 13 patients were male and 11 patients were female. Visual analogue scale (VAS) on daily activity and a 100-point scoring system including 70 points for pain and 30 points for function were used. The clinical outcomes were rated as follows: excellent, no pain on daily activity; good, less than 50% of previous VAS; fair, 50-75% of previous VAS; or poor, more than 75% of previous VAS. Excellent and good were graded as satisfactory results. We compare clinical results between groups and evaluate the relationships between clinical results and duration of symptom, fascial thickening and previous steroid injection were evaluated. Results: Overall satisfactory rate were 71.4%. There was no significant difference of clinical results between groups. And there were no significant difference between clinical results and duration of symtom, preoperative fascial thickening and previous steroid injection. Conclusions: ESWT for recalcitrant chronic proximal plantar fascitis is useful treatment method with high patient satisfaction and pain relief, but more long-term study must be needed.

• Korean Journal of Veterinary Research
• /
• v.32 no.1
• /
• pp.1-6
• /
• 1992

The turnover time of the mucosal epithelium in the small intestine(jejunum and ilium) and large interstine(cecum), and the cells in the lamina propria of the small intestine was investigated with the radioautography in mice at various times after single injection of $^3H$-thymidine. Twenty suckling mice were sacrified at each of the following time intervals after injection ; 2 hrs, 1, 3, 5. 7, 14 and 17 days. 1. The labeled index of the epithelial cells in the crypt and the villus of the small intestine averaged 98.7% and 1.3% at 2 hrs, 982% and 1.8% at 1 day, 18.7% and 81.3% at 3 days, 6.3% and 93.7% at 5 days, respectively. The labeled index of the epithelial cells of the crypt-base, the upper-crypt and the mucosal surface in the large intestine averaged 71.8%, 28.2% and 0% at 2 hrs, 45%. 54.2% and 0% at 1 day, 17.2%, 54.5% and 28.2% at 3 days, 10.2%, 32.4% and 57.4% at 5 days, respectively. This result suggested that the turnover time of all the epithelial cells migrating from crypts to villi in the direction of the villus tips was calculated to be less than 5 days, and also the longest turnover time was calculated to be no longer than 7 day. 2. The labeled index of the total cells in the lamina propria of the small intestine averaged 6.2-7% at 2 hrs to 5 days, 4.7% at 7 days 2.6% at 17 days and this index is tend to be decreased moderately at 7 days and severely at 17 days. So this result suggested that the turnover time of the cells with the shorter cycle duration in the lamina propria of the small intestine were less than 5 days and that of the cells with the longer cycle duration more than 17 days.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.463-468
• /
• 2017

For transdermal drug delivery, needless injection system is composed of laser and microjet injector. Main mechanism of microjet injector is the laser-induced bubble. Nd:YAG and Er:YAG laser are used as a power source. Laser parameters such as pulse duration and wavelength are considered, which are core parameters to control the bubble motion. The Nd:YAG laser, pulse duration is short than bubble life time making cavitation like bubble while in Er:YAG laser, long pulse duration and high absorption in water drive bubble as a boiling bubble. Detailed motion of bubble and microjet is captured by the high speed camera. So it is observed that microjet characteristics are determined by the bubble behavior. The performance of drug delivery system is evaluated by fluorescent staining of guinea pig skin.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.4
• /
• pp.345-363
• /
• 2024

Steel pipe reinforced grouting method has been widely used to strengthen the crown of tunnel face and prevent groundwater leakage during tunnel excavation. Various injection procedures without sealing have recently been suggested to enhance efficiency. There are two representative injection methods. One is simultaneous injection in segmented batches, and the other is multiple injection using the external packer. The pros and cons of each method were discussed in terms of construction duration and equipment. However, it has yet to be discussed how the injection procedure affects the grout diffusion range in the ground. This study aims to evaluate the grout diffusion range quantitatively by considering the practical grouting sequences. The grout viscosity was measured by laboratory testing. Then, the numerical modeling was structured using the commercial computational fluid dynamics software. Finally, the grout diffusion range affected by the injection procedure and ground conditions was evaluated by performing the numerical parametric study. The results showed that the injection method highly affected the grout diffusion range, especially for inhomogeneous soil. Consequently, it is anticipated that the proper method of steel pipe reinforced grouting will be suggested.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.555-561
• /
• 2005

This experimental study was executed to obtain basic data for actual engine operation using radical induced ignition method (RI) which can achieve emission reduction and high efficiency due to the rapid bulk combustion. In this study, a direct injection diesel engine was converted into SI type engine with a sparkplug. The modified SI type engine can be divided into two classes. One is the SI engine with a sparkplug only at the cylinder head, and the other is the SI engine with the sparkplug which is enveloped in a sub-chamber. Also, a basic experimental was conducted in order to investigate combustion mechanism of radical induced injection before the experiment execution for actual engine using the modified SI engine. The bulk combustion phenomenon of radical induced ignition method was analyzed from the basic experiment by using a constant volume chamber. Volume value of sub-chamber used in this experiment is approximately $0.2\%$ of one of the main combustion chamber. In this paper, combustion characteristics using radical induced injection method was compared with that of using spark ignition method according to change in the engine speed and equivalence ratio. As a result, in the case of the radical induced injection engine, the combustion duration and cycle variation were respectively reduced ranged from $\Phi$(equivalence ratio)=0.8 (lean mixture ratio) to $\Phi$=1.0 (stoichiometric ratio).

• Clinics in Shoulder and Elbow
• /
• v.17 no.3
• /
• pp.102-106
• /
• 2014

Background: The purpose of this study was to evaluate the effect of single blinded anterior intra-articular corticosteroid injection to the glenohumeral joint performed by short experienced clinicians in frozen state adhesive capsulitis patients. Methods: From March to June of 2013, among the patients who visited the shoulder outpatient clinic due to shoulder pain for 5-6 months and those patient diagnosed as frozen state adhesive capsulitis was selected. The diagnosis were based on base, first the global limitation of range of motion, defined as forward elevation <100, external rotation at side <10, internal rotation less than buttock, and abduction <70. Second, the patients had additional radiologic evaluations showing no major pathologies for such stiffness. Clinical outcome, were performed with pain visual analog scale (PVAS) and functional visual analog scale (FVAS), American Shoulder and Elbow Surgeons Shoulder score (ASES), preinjection and postinjection after 2-4 weeks. Finally 82-patients were enrolled. Mean age of the patients was 55.1 years and mean follow-up duration was 25.17 days. Results: The mean preinjection PVAS was 6.91 and postinjection was 3.11, there was 3.8 decreases from preinjection status (p < 0.001). The mean FVAS score showed 4.26 at preinjection and 6.63 afterwards (p < 0.001). The ASES score showed 27.89 increases after injection (p < 0.001). There were 64-patients (78.04%) who reported more than 3 points of decrease of PVAS, who could be judged as effective treatment. Conclusions: Single anterior glenohumeral steroid injection by short experienced clinicians to the patients with frozen state adhesive capsulitis has shown relatively high efficacy in clinical result evaluated by means of PVAS.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.1
• /
• pp.26-33
• /
• 2007

The intake swirl motion, as one of dominant effects for an engine combustion. is very effective for turbulence enhancement during the compression process in the cylinder of 2-valve engine. Because the combustion flame speed is determined by the turbulence that is mainly generated from the mean flow of the charge air motion in intake port system. This paper describes the experimental results of swirl flow and combustion characteristics by using the oil spot method and back-scattering Laser Doppler velocimeter (LDV) in 2-valve single cylinder transparent LPG engine using the liquid phase LPG injection. For this. various intake port configurations were developed by using the flow box system and swirl ratios for different intake port configurations were determined by impulse swirl meter in a steady flow rig test. And the effects of intake swirl ratio on combustion characteristics in an LPG engine were analyzed with some analysis parameters that is swirl ratio. mean flow coefficient, swirl mean velocity fuel conversion efficiency. combustion duration and cyclic variations of indicated mean effective pressure(IMEP). As these research results, we found that the intake port configuration with swirl ratio of 2.0 that has a reasonable lean combustion stability is very suitable to an $11{\ell}$ heavy-duty LPG engine with liquid phase fuel injection system. It also has a better mean flow coefficient of 0.34 to develope a stable flame kernel and to produce high performance. This research expects to clarify major factor that effects on the design of intake port efficiently with the optimized swirl ratio for the heavy duty LPG engine.

• International Journal of Oral Biology
• /
• v.33 no.4
• /
• pp.155-162
• /
• 2008

The present study investigated inflammatory hypersensitivity following compression of the trigeminal ganglion in rats. Experiments were carried out on male Sprague-Dawley rats weighing 250-260 g. Under anesthesia, rats were mounted on a stereotaxic frame and injected with $8{\mu}L$ of 4% agar solution through a stainless steel injector to compress the trigeminal ganglion. In the control group, rats underwent a sham operation without agar injection. Injection sites were examined with a light micrograph after compression of the trigeminal ganglion. Air-puff thresholds (mechanical allodynia) were evaluated 3 days before surgery and 3, 7, 10, 14, 17, 21, 24, 30, and 40 days after surgery. Air-puff thresholds significantly decreased after compression of the trigeminal ganglion. Mechanical allodynia was established within 3 days and remained strong over 24 days, returning to preoperative levels approximately 40 days following compression. After subcutaneous injection of 5% formalin ($50{\mu}L$) in the compression of the trigeminal ganglion-treated rats, nociceptive scratching behavior was recorded for 9 successive 5-min internals. Injection of formalin into the vibrissa pad significantly increased the number of scratches and duration of noxious behavioral responses in sham-treated rats. Noxious behavioral responses induced by subcutaneous formalin administration were significantly potentiated in rats with trigeminal ganglion compression. These findings suggest that compression of the trigeminal ganglion enhanced formalin-induced infla-mmatory pain in the orofacial area.

• Journal of Radiation Industry
• /
• v.11 no.1
• /
• pp.47-54
• /
• 2017

Compared to other occupations, there is a greater risk of exposure to radiation due to the use of radioisotopes in nuclear medicine for diagnostic evaluations and therapy. To consider ways to reduce exposure dose for those in nuclear medicine involved in injection work and elution work among radiation workers as well as for sanitation workers and trainees among frequent workers an investigation into exposure dose and situational analysis from changes in yearly exposure dose evaluations, changes in work environment and changes in forms of inspection were conducted. Exposure dose measurements were taken by using EPD MK2 worn during working hours for one injection worker, one elution worker, two sanitation workers, and one trainee at a general hospital in the Seoul area for three days from July 18th to 20th 2016. Radiation from radioisotopes which are a part of nuclear medicine can significantly affect not only radiation workers who deal with radioisotopes directly but also frequency works as well. According to this study the annual dose limit for elution workers and injection workers were considered safe as the amount of exposure was not large enough to have a significant effect. The limits of this study consist in the duration of this study and the quantity of participants. Also there was a limitation of the measurement device involving accumulated exposure, where the EPD MK2 cannot check the changes in exposure according to a particular activity.