• 제목/요약/키워드: injection detection

검색결과 484건 처리시간 0.036초

냉시동 조건에서 디젤 연소 특성 및 연소 개선에 대한 연구 (Improment of Diesel Combustion using multiple injection under Cold Start Condition)

  • 이행수;이진우
    • 한국산학기술학회논문지
    • /
    • 제18권4호
    • /
    • pp.711-717
    • /
    • 2017
  • 디젤엔진은 저온 상태의 냉시동 조건에서 디젤 미립화 특성 악화로 인한 시동성 및 유해배출가스 생성의 문제를 안고 있다. 본 연구에서는 냉시동 시의 연소개선을 위한 방안으로 다단분사 전략 적용 시의 연소 특성을 파악하고자 하였다. 본 연구에서는 냉시동성 개선을 위해 방안으로 다단분사 적용 시의 연소 특성을 파악하고자 하였다. 정적 연소 챔버 내에 설치한 압력센서를 이용하여 취득한 연소압 및 열방출율, 직접 화염 가시화기법을 적용한 화염강도를 이용하여 연소현상을 분석하고자 하였다. 시험 결과 단일 분사 대비하여 다단 분사 적용 시, 주분사에 의한 최대 연소압력 및 열방출 상승률이 증가하며, 주분사에 의한 화염 감지 기간이 단축됨을 확인하였다. 파일럿 분사량 변경을 통해 분사량 증대 시 파일럿 연소에 의한 열방출 향상에 기인한 주분사에 의한 연소가 개선됨을 확인하였다. 또한 분사압력 증대 시 연료 미립화 개선으로 인한 연소개선을 화염 강도 증대를 통해 확인할 수 있었다. 다만 분사량 및 분사압 증대는 벽면적심현상으로 인한 HC, CO의 배출 수준 악화를 초래할 수 있으므로, 실제 엔진 개발 시 이에 대한 정밀한 선정이 필요할 것으로 판단된다.

Pyrocatechol Violet Modified Graphite Pencil Electrode for Flow Injection Amperometric Determination of Sulfide

  • Emir, Gamze;Karakaya, Serkan;Dilgin, Yusuf
    • Journal of Electrochemical Science and Technology
    • /
    • 제11권3호
    • /
    • pp.248-256
    • /
    • 2020
  • In this study, pyrocatechol violet (Pcv) is proposed for the first time as an efficient electrocatalyst for oxidation of sulfide and flow injection analysis (FIA) of sulfide. A graphite pencil electrode (GPE) was modified with Pcv via immersion of the GPE into 0.01 M Pcv solution for 15 min. Cyclic voltammograms (CVs) demonstrated that Pcv/GPE exhibits a good electrocatalytic performance due to shift in the potential from +400 at bare GPE to +70 mV at Pcv/GPE and obtaining an enhancement in the peak current compared with the bare GPE. A linear range between 0.25 and 250 μM sulfide with a detection limit of 0.07 μM was obtained from the recorded current-time curves in Flow Injection Analysis (FIA) of sulfide. Sulfide in water samples was also successfully determined using the proposed FI amperometric methods.

비접지 LVDC 배전망의 지락고장 검출을 위한 분석 (Analysis for Pole to Ground Fault Detection in Ungrounded LVDC Distribution Network)

  • 박철원
    • 전기학회논문지P
    • /
    • 제67권3호
    • /
    • pp.119-124
    • /
    • 2018
  • Recently, LVDC distribution network and DC microgrid with many advantages are being built. However, this LVDC distribution is an IT grounded or ungrounded system, and it is difficult to detect a ground fault because the fault current is small. In this paper, we propose a signal injection method for unipolar LVDC distribution network to detect ground fault in ungrounded LVDC distribution, and various analyzes were performed for ground fault detection.

미소유체 칩 상에서 Quantum Dot 및 마이크로 비드를 이용한 생체물질 분석 (Microbead-based bio-assay using quantum dot fluorescence in a microfluidic chip)

  • 윤광석;이도훈;김학성;윤의식
    • 센서학회지
    • /
    • 제14권5호
    • /
    • pp.308-312
    • /
    • 2005
  • We present a microfluidic chip designed for the detection of antibody by using quantum dots fluorescence and a microbead-based assay. A custom designed PDMS microfluidic chip with multi-layer channel is utilized for capturing microbeads; antibody injection into each micro-well; QD injection; and fluorescence detection. The experiment using the fabricated microfluidic chip has been performed on solutions with various concentrations of antibody and has shown correlated fluorescent intensities.

여과기법 보안효율을 높이기 위한 센서네트워크 클러스터링 방법 (Enhancing Method to make Cluster for Filtering-based Sensor Networks)

  • 김병희;조대호
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.141-145
    • /
    • 2008
  • Wireless sensor network (WSN) is expected to be used in many applications. However, sensor nodes still have some secure problems to use them in the real applications. They are typically deployed on open, wide, and unattended environments. An adversary using these features can easily compromise the deployed sensor nodes and use compromised sensor nodes to inject fabricated data to the sensor network (false data injection attack). The injected fabricated data drains much energy of them and causes a false alarm. To detect and drop the injected fabricated data, a filtering-based security method and adaptive methods are proposed. The number of different partitions is important to make event report since they can make a correctness event report if the representative node does not receive message authentication codes made by the different partition keys. The proposed methods cannot guarantee the detection power since they do not consider the filtering scheme. We proposed clustering method for filtering-based secure methods. Our proposed method uses fuzzy system to enhance the detection power of a cluster.

  • PDF

Determination of Trace Anions in Concentrated Hydrogen Peroxide by Direct Injection Ion Chromatography with Conductivity Detection after Pt-Catalyzed On-Line Decomposition

  • 김도희;이보경;이동수
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권6호
    • /
    • pp.696-700
    • /
    • 1999
  • A method has been developed for the determination of trace anion impurities in concentrated hydrogen peroxide. The method involves on-line decomposition of hydrogen peroxide, ion chromatographic separation and subsequent suppressed-type conductivity detection. H2O2 is decomposed in Pt-catalyst filled Gore-Tex membrane tubing and the resulting aqueous solution containing analytes is introduced to the injection valve of an ion chromatograph for periodic determinations. The oxygen gas evolving within the membrane tubing escapes freely through the membrane wall causing no problem in ion chromatographic analysis. Decomposition efficiency is above 99.99% at a flow rate of 0.4mL/min for a 30% hydrogen peroxide concentration. Analytes are quantitatively retained. The analysis results for several brands of commercial hydrogen peroxides are reported.

라인스캔을 이용한 자동차 사출성형 부품의 검사 기술 (An Inspection Method for Injection Molded Automotive Parts using Line-Scan)

  • 윤재식;김진욱;허만탁;김석태
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.805-807
    • /
    • 2011
  • 본 논문에서는 라인스캔 기술을 이용하여 자동차 사출성형 부품의 결함을 검사하는 방법을 제안한다. 검사대상의 결함을 검사하기 위한 검사 알고리즘은 라인 검출 알고리즘, 결함 분석 알고리즘으로 구성된다. 라인 검출 알고리즘은 레이저 선의 중심점에 해당하는 픽셀의 좌표를 결정한다. 검사 알고리즘은 해당 검사대상 모델에 대한 패턴 데이터와 라인 검출 알고리즘으로부터 얻은 데이터를 이용하여 제품의 불량 유무를 결정한다. 검사 정확도, 처리 시간 등의 평가를 통해 제안하는 검사 방법이 유효함을 확인하였다.

  • PDF

Single Crystalline CoFe/MgO Tunnel Contact on Nondegenerate Ge with a Proper Resistance-Area Product for Efficient Spin Injection and Detection

  • Jeon, Kun-Rok;Min, Byoung-Chul;Lee, Hun-Sung;Shin, Il-Jae;Park, Chang-Yup;Shin, Sung-Chul
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 2010년도 임시총회 및 하계학술연구발표회
    • /
    • pp.96-96
    • /
    • 2010
  • We report the proper resistance-area products in the single crystalline bcc CoFe/MgO tunnel contact on nondegenerate n-Ge desirable for efficient spin injection and detection at room temperature. The electric properties of the crystalline CoFe(5 nm)/MgO(1.5,2.0,2.5 nm)/n-Ge(001) tunnel contacts have been investigated by I-V-T and C-V measurements. Interestingly, the tunnel contact with the 2-nm MgO exhibits the ohmic behavior with low resistance-area products, satisfying the theoretical conditions required for significant spin injection and detection. This result is ascribed to the presence of MgO layer between CoFe and n-Ge, enhancing the Schottky pinning parameter as well as shifting the charge neutrality level.

  • PDF

흐름주입 분석에 의한 아염소산 이온의 분광광도법 정량 (Photometric Determination of Chlorite ion by Flow Injection Analysis)

  • 최용욱;이수영;김미경;박성호
    • 대한화학회지
    • /
    • 제44권6호
    • /
    • pp.556-562
    • /
    • 2000
  • 간접 요오드화법의 UV 검출을 이용한 흐름주입분석에 의한 아염소산 이온의 정량에 관하여 연구하였다. 산성 조건하에서 아염소산은 요오드화 이온을 요오드로 산화시키고 자신은 염화 이온으로 환원된다. UV 370nm에서 노란 색으로 발색된 요오드의 흡광도를 측정하여 아염소산 이온을 간접적으로 정량 하였다. 흐름주입분석-UV검출 장치를 이용한 무기성 소독부산물인 아염소산 이온을 선택적으로 정량하기 위한 분석 인자로서 혼합 및 반응코일 길이, 산성 용리액의 pH, 요오드화 이온의 농도, 주입고리부피, 반응 온도, 유속을 최적화 하였다. 조제수로부터 산화제나 방해 물질들을 제거하기 위한 가리움제를 조사하였다. 아염소산 이온에 대한 0.002~0.2 mg/L의 선형 농도 범위에서 검정곡선은 0.999이상의 상관계수를 나타내였다. 아염소산 이온의 검출한계는 0.18 ${\mu}g/L$이었다.

  • PDF