• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.259-265
• /
• 2014

When the trace-driven simulation is used for the performance analysis of widely used multicore processors in the initial design stage, much time and disk space is necessary. In this paper, statistical simulations are performed for a high performance multicore processor with various hardware configurations. For the experiment, SPEC2000 benchmarks programs are used for profiling and synthesizing new instruction traces. As a result, the performance obtained by our statistical simulation is comparable to that of the trace-driven simulation with the benefit of tremendous reduction in the simulation time.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3427-3432
• /
• 2014

This study introduces a new method of combining Imaging Differential Optical Absorption Spectroscopy (Imaging-DOAS) data and plume dispersion formulas for power plant emissions to determine the three-dimensional structure of a dispersing pollution plume and the spatial distributions of trace gas volume mixing ratios (VMRs) under conditions of negligible water droplet and aerosol effects on radiative transfer within the plume. This novel remote-sensing method, applied to a power plant stack plume, was used to calculate the two-dimensional distributions of sulfur dioxide ($SO_2$) and nitrogen dioxide ($NO_2$) VMRs in stack emissions for the first time. High $SO_2$ VMRs were observed only near the emission source, whereas high $NO_2$ VMRs were observed at locations several hundreds of meters away from the initial emission. The results of this study demonstrate the capability of this new method as a tool for estimating plume dimensions and trace gas VMRs in power plant emissions.

• Journal of Nutrition and Health
• /
• v.39 no.1
• /
• pp.28-34
• /
• 2006

This study was performed to compare nutrients intake and levels of three elements (iron, copper and zinc) in the plasma of breast cancer patients to those in healthy controls. Patients (n = 97) and their age-matched healthy control groups (n = 97) participated in the study. A semi-quantitative food frequency questionnaire specifically formulated to evaluate the consumption of nutrients was used to estimate dietary intake. Only plasma was taken from the 20 patients and their age-matched healthy control group. Plasma concentrations of iron, copper, zinc, ratio of Cu/Zn were measured in both groups. Results showed that patients consumed significantly lower protein, fat, iron. Plasma level of copper and ratio of Cu/Zn were significantly higher in patients compared to those of controls. In conclusion, change of trace elements in plasma might be useful and significant as biomakers involving the initial process. And these results imply that trace elements status is a factor related to breast cancer risk and suggest that proper intake of those nutrients is required for cancer prevention.

• Economic and Environmental Geology
• /
• v.31 no.6
• /
• pp.473-483
• /
• 1998

The igneous rocks in the Goseong area are composed of the volcanic rocks (andesitic lapilli tuff and rhyodacite), Bulgugsa granites (Hornblende-biotite granite and two pyroxene granite) and intrusive andesites. In the variation diagrams of the trace and rare earth element contents and elemental ratios as well as the REE patterns, the three igneous rock types show different variational trends and patterns. The geochemical features represent that the igneous rocks in the area were formed from three different magmatic pulses. Two independently carried out Rb-Sr isotope experiments for the Goseong granites show that the whole rock ages and Sr initial ratios of the granites are $66.4{\pm}6.2Ma$, $0.70517{\pm}22(2{\sigma})$ and $71.3{\pm}6.8Ma$, $0.70506{\pm}18(2{\sigma})$, respectively. These results suggest that the granites magma originated from the lower crustal materials of igneous origin intruded into the area during the late Cretaceous period. Masan hornblende-biotite granite emplaced at the vicinity of the Goseong area is very similar to the Goseong granite in its mineral compositions, major, trace and rare earth element contents and patterns. The intruding age (100 Ma) of the Masan granite is order than that of the Geseong granite, however. The similarity of the geochemical natures but the contrast of the intruding ages between the Masan and Goseong granites possibly indicate that the magma generation from the same source materials occurred at a temporal interval of ca. 30 Ma.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.356-367
• /
• 2018

A series of tests dedicated to station blackout (SBO) accident scenarios have been recently performed at the $Prim{\ddot{a}}rkreislauf-Versuchsanlage$ (primary coolant loop test facility; PKL) facility in the framework of the OECD/NEA PKL-3 project. These investigations address current safety issues related to beyond design basis accident transients with significant core heat up. This work presents a detailed analysis using the best estimate thermal-hydraulic code TRACE (v5.0 Patch4) of different SBO scenarios conducted at the PKL facility; failures of high- and low-pressure safety injection systems together with steam generator (SG) feedwater supply are considered, thus calling for adequate accident management actions and timely implementation of alternative emergency cooling procedures to prevent core meltdown. The presented analysis evaluates the capability of the applied TRACE model of the PKL facility to correctly capture the sequences of events in the different SBO scenarios, namely the SBO tests H2.1, H2.2 run 1 and H2.2 run 2, including symmetric or asymmetric secondary side depressurization, primary side depressurization, accumulator (ACC) injection in the cold legs and secondary side feeding with mobile pump and/or primary side emergency core coolant injection from the fuel pool cooling pump. This study is focused specifically on the prediction of the core exit temperature, which drives the execution of the most relevant accident management actions. This work presents, in particular, the key improvements made to the TRACE model that helped to improve the code predictions, including the modeling of dynamical heat losses, the nodalization of SGs' heat exchanger tubes and the ACCs. Another relevant aspect of this work is to evaluate how well the model simulations of the three different scenarios qualitatively and quantitatively capture the trends and results exhibited by the actual experiments. For instance, how the number of SGs considered for secondary side depressurization affects the heat transfer from primary side; how the discharge capacity of the pressurizer relief valve affects the dynamics of the transient; how ACC initial pressure and nitrogen release affect the grace time between ACC injection and subsequent core heat up; and how well the alternative feeding modes of the secondary and/or primary side with mobile injection pumps affect core quenching and ensure stable long-term core cooling under controlled boiling conditions.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.303-310
• /
• 1996

The marine microalga Isochrysis galbana Parke was studied to optimize its growth conditions in flask culture. Important medium components studied include nitrogen source, buffer, trace elements and vitamins. Environmental conditions include pH, temperature, light intensity, mixing extent and working volume. The medium prepared from natural sea-waters gave a higher final cell density than the medium prepared from synthetic sea-water Nitrate was a better source than ammonium. In the range of 0.4∼2mM, the final cell density was proportional to the initial nitrate concentration and the cell yield was estimated to be 8.5g dry cell wt/g N. For phosphate, optimal growth was observed in 0.1∼1.0mM but a considerable variation in pH was resulted. The addition of Tris at 5mM or 7mM could stabilize the medium pH, but this significantly reduced both growth rate and final cell density, The effect of trace elements and vitamins was negligible. Optimal temperature and initial pH were $20^{\circ}C$ and 8. When the intensity of incident light was varied in the range of 400∼2100 lux, the growth rate increased from 10mL to 70mL, the final cell density decreased although the initial growth rate did not change. Optimal agitation speed was 100rpm when working volume was 30mL. With optimal conditions, the maximum specific growth rate obtained was 0.021hr-1 and the final cell density was 1.1g/L.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.284-286
• /
• 2003

In order to optimize the culture medium for fumaric acid production using newly isolated fungi, we investigated the effects of various carbon sources and nitrogen sources. When rice bran as nitrogen source was used, the effects of trace elements (phosphate, magnesium, zinc, and iron) on fumaric acid production were also investigated. When initial glucose of 50 g/L and rice bran was employed, maximum fumaric acid was produced without addition of magnesium, zinc, and iron.

• Microbiology and Biotechnology Letters
• /
• v.22 no.4
• /
• pp.401-406
• /
• 1994

The medium compositions of Alcaligenes eutrophus were optimized for increasing PHB productivity. It is very important to optimize the concentrations of inorganic salts and trace eleme- nts as well as carbon and nitrogen sources to maximize cell growth rate and productivity. The fed-batch culture of Alcaligenes eutrophus by dual feeding of ammonia water and glucose under optimized initial medium concentrations was carried out. Glucose was fed manually according to glucose consumption rate and ammonia water by pH-stat. The final cell concentrations and PHB content in 30 hours were 122 g/l and 65% of dry cell weight(yielding 79 g of PHB/l), respectively and 2.64 g/l/hr of PHB production rate was obtained.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.04a
• /
• pp.3-9
• /
• 2001

The Ms 7.7 earthquake of Gujarat, India occured early in the morning of January 26, 2001. Subsequent of the earthquake, as a Seismologist at Korea Institute of Geoscience and Mineral Resources(KIGAM), I have been visited epicentral area here reporting the impressions and initial observations collected during the period of Feb. 07 to 13. The trace of surface faulting was not founded. However the mechanism of the earthquake suggests the indenting Indian plate to the Eurasian plate was the tectonic background of this earthquake. Large casualties compare with the magnitude and focal depth of the event, seems due to the poor construction of the typical ordinary Indian housing structure. The wall and roof of the house are very thick to avoid high temperature of the epicentral region.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.77.2-77.2
• /
• 2014

Questions of how our Milky Way evolves through the interaction with its environment have been constantly raised. One particularly interesting question is how the metallicity would change as our Milky Way goes through collision with HVCs. Because of the possibility of HVCs providing fuel for star formation in the Galactic disk, we simulate the collision between HVCs and the Galactic disk. More specifically, we trace how the Galactic metallicity changes throughout the process of HVCs colliding with our Milky Way based upon a specific scenario that HVCs are primordial gas left-overs from an ancient galaxy formation. Such mixing between metal-rich gas (disk) and metal-poor HVC can be traced by running numerical simulations with the FLASH code due to its capability of tracking down the abundance change of a specific element such as carbon at each time step of the hydrodynamic evolution. As for now, we give how this mixing depends on model parameters that we choose such as collision speed, initial metallicities, temperature and so on.