• Computers and Concrete
• /
• 제9권1호
• /
• pp.1-19
• /
• 2012

The size-effect study of various fracture parameters obtained from two parameter fracture model, effective crack model, double-K fracture model and double-G fracture model is presented in the paper. Fictitious crack model (FCM) for three-point bend test geometry for cracked concrete beam of laboratory size range 100-400 mm is developed and the different fracture parameters from size effect model, effective crack model, double-K fracture model and double-G fracture model are evaluated using the input data obtained from FCM. In addition, the fracture parameters of two parameter fracture model are obtained using the mathematical coefficients available in literature. From the study it is concluded that the fracture parameters obtained from various nonlinear fracture models including the double-K and double-G fracture models are influenced by the specimen size. These fracture parameters maintain some definite interrelationship depending upon the specimen size and relative size of initial notch length.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.99-108
• /
• 2000

The size effect on axial compressive strength in notched concrete specimens was experimentally investigated. Based on the concept of the fracture mechanics and size effect law, theoretical studies for axial compressive failure of concrete were reviewed, and two failure modes of concrete specimens under compression were discussed. In this study, experiments of axial compressive failure, which is one of the two failure modes, was carried out by using cylindrical specimens. Adequate notch length was taken from the experimental result of strength variation based on the notch length. And, by taking various sizes of specimens the size effect on axial compressive strength of concrete was investigated. Also, model equations were suggested by modified size effect law (MSEL). The test results show that size effect appears conspicuously for all series of specimens. Additionally, the effect of initial notch length on axial compressive strength was also apparent.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.267.2-267.2
• /
• 2013

In the citrate reduction method of gold nanoparticle (AuNP) synthesis, pH of the reaction mixture can have a considerable impact on the size and size distribution of AuNPs. In this work, effects of pH variation upon the size and its distribution were examined systematically. As the initial pH was change from 5.5 to 10.5, it showed an optimal pH around 7.5. At this pH, both of the size and the size distribution showed their minimum values, which was verified by transmission electron microscopy and UV-vis spectroscopy. This occurrence of optimal pH was discussed with the results of in situ monitoring pH during the reaction of AuNP synthesis.

• 감성과학
• /
• 제21권2호
• /
• pp.15-28
• /
• 2018

본 연구는 대형공간을 대상으로 시선추적 실험을 실시하고, 성별에 나타난 동공의 주시특성을 분석하였다. 시선추적 실험 시간의 흐름에서 생겨나는 동공변화를 분석함으로써 성별 주시행태를 객관적이면서도 과학적으로 분석할 수 있는 틀을 제시했다. 나아가 동공의 크기가 안정적으로 변하는 시간과 성별에 따른 차이를 정리하였는데 성별에 따른 시지각 정보 획득 시간의 특성을 발견할 수 있었으며 여자가 남자보다 1~2초 정도 늦게 관심과 흥미요소를 시각정보로서 받아들이기 시작한 것을 알 수 있었다. 초기 "1초${\rightarrow}$2초"에서 남자는 도약, 여자는 고정에서 동공크기가 확대되었다. 또한 고정 주시에 국한하여 성별 변화율을 보면 9초를 전환점으로 해서 9초 이하 시간에서는 여자가, 9초 이후 시간에서는 남자의 동공크기가 더 커졌다. 즉 1-8초 시간에서는 여자가, 10-15초 범위에서는 남자가 상대적으로 더 큰 동공확대를 통해 시지각 정보를 획득한 것으로 보인다. 하지만 주시시간의 시간의 변화에 따라 여자의 동공크기가 더 크게 확대된 것에서부터 여자의 경우가 일정 시간이 경과한 후에는 관심이나 흥미가 있는 요소를 더 많이 주시하려는 움직임이 활발했다.

• 한국축산식품학회지
• /
• 제42권3호
• /
• pp.411-425
• /
• 2022

Semi-dried restructured sausages are restructured meat products with a high nutritional and economic value. However, excessively long drying times can have negative effects on the energy consumption, texture, and sensory properties of semi-dried restructured sausages. The objective of this study was to investigate the effects of different water contents on the drying and physicochemical characteristics of semi-dried restructured sausages. Sausages were prepared with different initial moisture contents (0%-50%) and drying time (0-580 min). The drying characteristics, including the drying rate, effective moisture diffusivity, and water activity of sausage were significantly improved as the initial moisture content was increased. When the initial moisture content of the sausage was 50%, physicochemical properties, such as color, porosity, shear force, and volatile basic nitrogen, were improved the most along with the decreased drying time. Scanning electron microscopy data showed greater porosity and pore size in sausages with the increase of initial moisture content. Collectively, our data suggest that an increase in the initial moisture content of semi-dried restructured sausages improves their drying characteristics and physicochemical properties.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.435-443
• /
• 2015

Offshore structure may be considerably vulnerable to fatigue failure while initial flaw propagates under cyclic loading, so crack propagation analysis/fracture/yield assessments about initial flaw detected by NDT are necessarily required. In this paper, case studies have been conducted by flaw assessment program using engineering criticality analysis (ECA) approach. Variables such as flaw geometry, flaw size, structure geometry, dynamic stress, static stress, toughness, crack growth rate, stress concentration factor (SCF) affected by weld are considered as analysis conditions. As a result, the safety of structure was examined during fatigue loading life. Also, critical initial flaw size was calculated by sensitivity module in the developed program. The flaw assessments analysis using ECA approach can be very useful in offshore industries owing to the increasing demand on the engineering criticality analysis of potential initial flaws.

• Clinics in Shoulder and Elbow
• /
• 제19권2호
• /
• pp.78-83
• /
• 2016

Background: We investigated the risk factors for the recurrence of anterior shoulder instability after arthroscopic surgery with suture anchors and the clinical outcomes after reoperation. Methods: A total of 281 patients (February 2001 to December 2012) were enrolled into our study, and postoperative subluxation and dislocation were considered as recurrence of the condition. We analyzed radiologic results and functional outcome including the American Shoulder and Elbow Surgeons Evaluation Form, the Korean Shoulder Society Score, and the Rowe scores. Results: Of the 281 patients, instability recurred in 51 patients (18.1%). Sixteen out of 51 patients (31.4%) received a reoperation. In terms of the functional outcome, we found that the intact group, comprising patients without recurrence, had a significantly better functional outcome than those in the recurrent group. The size of glenoid defect at the time of initial surgery significantly differed between intact and recurrent group (p<0.05). We found that the number of dislocations, the time from the initial presentation of symptoms to surgery, and the number of anchor points significantly differed between initial operation and revision group (p<0.05). The functional outcome after revision surgery was comparable to intact group after initial operation. Conclusions: Eighteen percent of recurrence occurred after arthroscopic instability surgery, and 5.6% received reoperation surgery. Risk factors for recurrence was the initial size of glenoid defect. In cases of revision surgery, good clinical outcomes could be achieved using additional suture anchor.

• Journal of Mechanical Science and Technology
• /
• 제14권4호
• /
• pp.401-407
• /
• 2000

An elastic-plastic finite element analysis is performed to investigate detailed closure behavior of fatigue cracks and the numerical results are compared with experimental results. The finite element analysis performed under plane stress using 4-node isoparametric elements can predict fatigue crack closure behavior. The mesh of constant element size along crack surface can not predict the opening level of fatigue crack. The crack opening level for the constant mesh size increases linearly from initial crack growth. The crack opening level for variable mesh size, is almost flat after crack tip has passed the monotonic plastic zone. The prediction of crack opening level using the variable mesh size proportioning the reversed plastic zone size with the opening stress intensity factors presents a good agreement with the experimental data regardless of stress ratios.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.40-43
• /
• 2003

The phase transformation, variation of secondary phase, and critical current density $(J_c) for (Bi,Pb)_2Sr_2Ca_2Cu_3O_10 (2223)$ tapes have been studied through the thermal slide heat treatment (TSHT) process. This process consists of a multiple variations of oxygen partial pressures and temperatures at the initial heat treatment During the initial heat treatment some secondary phase such as $(Ca,Sr)_2CuO_3(2/1 AEC), (Ca,Sr)_{14}Cu_{24}O_{41} (14/24 AEC), and (Bi,Pb)_2Sr_2CuO_y$(2201, amorphous phase) farm in Bi-2223 tapes, especially at the 2223 grain boundaries. These secondary phases are detrimental to the phase transformation and final properties. In order to control the secondary phase in Bi-2223 tapes the amount and size of secondary phases among the TSHT process were observed. The results indicate that the amount and particle size of AEC particles were smaller when the TSHT process was used than when the normal process at the initial heat treatment was used which results in the improved $J_c$ properties after the final process.

• Structural Engineering and Mechanics
• /
• 제38권4호
• /
• pp.443-457
• /
• 2011

The loss of strength in a structure as a result of cyclic loads over a period of life time is an important phenomenon for the life-cycle analysis. Service loads are accentuated at the areas of stress concentration, mainly at the connection of components. Structural components unavoidably are affected by defects such as surface scratches, surface roughness and weld defects of random sizes, which usually occur during the manufacturing and handling process. These defects are shown to have an important effect on the fatigue life of the structural components by promoting crack initiation sites. The value of equivalent initial flaw size (EIFS) is calculated by using the back extrapolation technique and the Paris law of fatigue crack growth from results of fatigue tests. We try to analyze the effect of EIFS distribution in a multiple site damage (MSD) specimen by using the extended finite element method (XFEM). For the analysis, fatigue tests were conducted on the centrally-cracked specimens and MSD specimens.