• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.711-718
• /
• 1992

Pb(Fe1/2Nb1/2)O3 was prepared by the molten salt synthesis method using an equimolar mixture of NaCl-KCl. Initial particle size could be controlled by varying the weight ratio of the NaCl-KCl to raw materials from 0.1 to 1.0, and the initial particle size effects on the sintering and dielectric properties of Pb(Fe1/2Nb1/2)O3 were investigated at the sintering temperature range from 90$0^{\circ}C$ to 105$0^{\circ}C$. As the weight ratio of salt increased, the average particle size decreased and the particle size distributions tended to narrow. As the initial particle size decreased, the linear shrinkage and density increased due to the promotion of densification. Dielectric constant increased with decreasing the initial particle size resulting from the increase of density and grain size.

• 대기
• /
• 제32권4호
• /
• pp.367-379
• /
• 2022

In this paper, the evaluation of the performance of Korea Meteorological Administratio (KMA) Global Seasonal forecasting system version 6 (GloSea6) is presented by assessing the effects of larger ensemble size and carrying out the test using different initial conditions for hindcast in sub-seasonal to seasonal scales. The number of ensemble members increases from 3 to 7. The Ratio of Predictable Components (RPC) approaches the appropriate signal magnitude with increase of ensemble size. The improvement of annual variability is shown for all basic variables mainly in mid-high latitude. Over the East Asia region, there are enhancements especially in 500 hPa geopotential height and 850 hPa wind fields. It reveals possibility to improve the performance of East Asian monsoon. Also, the reliability tends to become better as the ensemble size increases in summer than winter. To assess the effects of using different initial conditions, the area-mean values of normalized bias and correlation coefficients are compared for each basic variable for hindcast according to the four initial dates. The results have better performance when the initial date closest to the forecasting time is used in summer. On the seasonal scale, it is better to use four initial dates, where the maximum size of the ensemble increases to 672, mainly in winter. As the use of larger ensemble size, therefore, it is most efficient to use two initial dates for 60-days prediction and four initial dates for 6-months prediction, similar to the current Time-Lagged ensemble method.

• 콘크리트학회지
• /
• 제2권1호
• /
• pp.91-100
• /
• 1990

초기 균열을 갖는 대부분의 구조 부재의 있어서, 부재의 크기가 중가함에 따라 일반적으로 강도가 감소하는 현상을 보인다. 이를 크기효과라고 하며, 특히 콘크리트는 유리, 철과같은 구조 재료와는 달리 초기균열이 없는 경우에도 이러한 크기효과를 나타낸다는 것이 실험에 의해 나타나고 있다. 기존의 크기효과 법칙을 따르면 크기가 배우 큰 콘크리트 부재는 응력을 거의 받을 수 없는 것으로 나타나나, 실험에 의하면 강도의 감소율이 현저하게 감소되어 기존의 크기효과 법칙과 큰 차이를 보인다. 따라서, 본 논문에서는 콘크리트 구조물의 비선형 파괴역학에 근거하여 비유사 균열이 존재하는 경우에 대한 크기효과식을 유도하여 기존의 할열인장강도, 전단강도 및 압축강도 실험치에 대한 회귀분석을 통하여 보다 나은 모델식을 제시하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.330-333
• /
• 2003

Initial cluster size for clustering of partitioning methods is very important to the clustering result. In K-means algorithm, the result of cluster analysis becomes different with optimal cluster size K. Usually, the initial cluster size is determined by prior and subjective information. Sometimes this may not be optimal. Now, more objective method is needed to solve this problem. In our research, we propose a hybrid genetic algorithm, a tree induction based evolution algorithm, for determination of optimal cluster size. Initial population of this algorithm is determined by the number of terminal nodes of tree induction. From the initial population based on decision tree, our optimal cluster size is generated. The fitness function of ours is defined an inverse of dissimilarity measure. And the bagging approach is used for saying computational time cost.

• 수산경영론집
• /
• 제53권1호
• /
• pp.17-53
• /
• 2022

This study investigated the initial capital trend of newly-established fisheries companies during the Japanese occupation period. The initial capital size of fisheries companies provides information about the viability of the fisheries companies as well as the utilization intensity of fisheries resources. According to the analysis results, the average initial capital size of fisheries companies was larger in the enforcement period of "Chosun Company Ordinance" than in its abolition period. The initial capital size of the Chosun-capital fisheries company was smaller than that of the Japanese-capital fisheries company during the Japanese occupation period. The number of new fisheries companies funded by Chosun capital was less than the number of new fisheries companies funded by Japanese capital. Therefore, it could be seen that the Japanese fisheries companies had stronger dominance in the fisheries sector than the Chosun fisheries companies during the Japanese occupation period, and that Japanese fisheries companies were more viable than Chosun fisheries companies.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.285-288
• /
• 2000

The effect of the initial BSCCO 2212 grain size on the final gain size and the formation of the BSCCO 2223 was studied using a powder precursor synthesized by two-powder method. 2212 and CaCuO$_2$ tapes were prepared by dip coating and joined by pressing and then followed by the repeated thermo mechanical treatment. The samples were characterized by XRD and SEM analysis. The formation and grain size of the BSCCO 2223 depended on the initial BSCCO 2212 grain size.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 추계종합학술대회
• /
• pp.370-373
• /
• 1998

현재 인터넷상의 QoS(Quality of Service) 향상을 위해서 여러 가지 방법과 기술들이 소개되고 있다. 이러한 QoS 향상을 위해 트래픽 제어기법과 IS(Integrated Services), DS(Differentiated Services), Tag Switching, MPLS(Multi protocol Label Switching) 등과 같은 방법으로 인터넷에서 보다 나은 서비스를 지원하려는 노력이 시도되고 있다. 본 논문에서는 특히 TCP connection에서의 initial window size의 변경이 네트워크의 QoS, 즉 link의 utilization과 packet의 drop, performance에 어떠한 영향을 주는지를 살펴본다. 그리고, 이에 대한 특성을 분석하고 개선점을 현재의 인터넷에서 가장 많이 사용되어지고 있는 FTP와 web에 대한 모델을 사용하여 가상적으로 시뮬레이션을 해본다.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.43-50
• /
• 2002

In this study, size effect tests were conducted on axial compressive strength of concrete members. An experiment of Mode I failure, which is one of two representative compressive failure modes, was carried out by using dimensionally proportional cylindrical specimens (CS). An adequate notch length was taken from the experimental results obtained from the compressive strength experiment of various initial notch lengths. Utilizing the notch length, specimen sizes were then varied. In addition, new parameters for the modified size effect law (MSEL) were suggested using Levenberg-Marquardt's least square method (LSM). The test results show that size effect was apparent for axial compressive strength of cracked specimens. Namely, the effect of initial notch length on axial compressive strength size effect was apparent.

• 천문학회보
• /
• 제35권2호
• /
• pp.35.1-35.1
• /
• 2010

Unlike the initial mass function, the initial size distribution of globular cluster (GC) systems is not well known. We calculate the evolution of the mass function (MF), radial distribution (RD), and size distribution (SD) of the Galactic GC system. By comparing the results from this calculation and the present-day MF, RD, and SD of the Galactic GC system, we infer the initial SD of the GC system. We find that a Gaussian distribution of the half-mass radius and a Gaussian distribution of the half-mass to Jacobi radius ratio are the best-fit initial SDs of the Galactic GC system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.217-222
• /
• 1994

This paper describes the determination of optimal initial billet size for axisymmetric cold forging products using neural networks. The determination of optimal initial billet size is very important in forging design and forming sequence design, because the result of such designs and forming load can be different by variable initial billet sizes. The forming difficulty has been defined as the degree of difficulty in forming by 3 process ' forward extrusion, backward extrusion and upsetting. By neural networks a forming difficulty can be determined with the ratio of shape and forming process. From the graph of maximum, minimum, and average forming difficulties by variable billet sizes, the optimal billet size can be determined. The initial billets of a solid part and a hollow part whichwas determined by this study are compared with the sequence drawing generated by the one of forming sequence design system.