• Journal of Korean Medical Science
• /
• v.33 no.48
• /
• pp.306.1-306.6
• /
• 2018

This study examined the add-on efficacy of eye movement desensitization and reprocessing (EMDR) therapy among adult civilians with post-traumatic stress disorder (PTSD) who continued to be symptomatic after more than 12 weeks of initial antidepressant treatment. Scores for the Clinician Administered PTSD Scale (CAPS) were rated pre- and post-EMDR and at a 6-month follow-up. After an average of six sessions of EMDR treatment, seven of 14 patients (50%) showed more than a 30% decrease in CAPS score and eight (57%) no longer met the criteria for PTSD. Our results indicate that EMDR could be successfully added after failure of initial pharmacotherapy for PTSD.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.228-234
• /
• 1998

To interpret the relationship between movement of the Yangsan fault and tectonics around the Korean peninsula, the six sequential paleostresses were reconstructed from 1, 033 striated small faults which were measured at 37 outcrops along the strike of the Yangsan fault. And, the relationship between these paleostresses of the Yangsan fault and the tectonic events around the Korean peninsula were compared. As compared with the tectonic history around the Korean peninsula, the movement of the Yangsan fault is interpreted as follows; The initial feature of the Yangsan fault was formed with the development of extension fractures by the NW-SE extension. The fault experienced a right-lateral strike-slip movement continuously. The movements had been continued until the Late Miocene age, which was the most active period in faulting. The left-lateral strike-slip movement was followed by subsequent tectonic events. In the last stage, the fault acted with a slight extension or right-lateral movement.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.167-171
• /
• 2007

Brain computer interface is the technology of interface for next generation. Recently, user intention has been tried to be recognized for interfacing a computer. EEG plays important role in developing practical application in this area. Much research has focused on extracting EEG commander generated by human movement. ERD/ERS has generally accepted as important EEG parameters for prediction of human movement. However, There has been difference between initial movement indicated by ERD/ERS and real movement. Therefore, this study was to determine the time differences for brain interface by ERD/ERS. Five university students performed ten repetitive movements. ERD/ERS was determined according to movement execution and the significant pattern showed the difference between movement execution and movement indication of ERD/ERS.

• The Journal of Korean Academy of Prosthodontics
• /
• v.17 no.1
• /
• pp.7-21
• /
• 1979

This investigation was to analyse normal protrusive and lateral condylar pantographic records written on the sagittal plane and to study components of Fisher's angle and their interrelations. The purpose of this study was limited to (1) discussing the significance of sagittal pantographic record in diagnosis of occlusal disease and(2) basing for reasoning validity of measuring Fisher's angle which has been reported so far. As a result followings were concluded. 1. In each protrusive and lateral condylar movement path, five complicate factors such as initial straightness, distributed simple sigmoid type, simple curvature, initial tiny protruding convexity and tiny repeated sigmoid patterns were noted. Generally each condylar movement path was composed of two to three of these factors. 2. The distribution of positional interrelations of protrusive and lateral condylar paths could be divided into five categories; (a) protrusive-upper, (b) completely coinciding, (c) partially initial coinciding, (d) partially inverted crossing, and (e) completely inverting. Among these, protrusive path-upper positioned condyles were prevailed (79.2%). 3. The distribution of interrelations of protrusive and lateral condylar paths could be devided into five categories according to their distances in the course of movement. Among these, opening (95.8%) and paralleling (66.7%) were prevailing. 4. The involved number of characteristic heterogenous patterns of five categories in protrusive and lateral condylar movement recording relations at one simultaneous recordings was limited to three. However, in case of homogeneous patterns were repeated, usually three to four were included. 5. The maximum distance between protrusive and lateral condylar paths was 1.45mm at the location of 4mm advanced position from centric relation point and 3.90mm at the location of protrusive movement terminal. 6. It seemed to be that ,pantographic records should be consulted other clinical symptoms in order to make certain occlusion diagnosis. 7. At the present moment of investigation, expressing Fisher's angle as a degree revealed a lack due to inherent complexity of protrusive and lateral condylar movement paths. 8. The typical pattern of protrusive and lateral condylar paths written on a pantographic sagittal plate might be described as follows; (a) protrusive condylar path should be positioned upwardly, (b) both mainly be simple curvature, (c) interrelations mainly be opening or paralleling. 9. The mean amounts of separation between protrusive and lateral condylar movement path were $0.75{\pm}0.46$ at 4mm advanced location from centric relation and $1.74{\pm}0.64mm$ at the location of protrusive path terminal.

• Transactions of Materials Processing
• /
• v.12 no.3
• /
• pp.208-213
• /
• 2003

The methodology to design initial blanks considering the reduction of both springback and flange trimming amounts is studied. Three dimensional forming analysis of a trial blank Is first carried out using FEM and the tentative Initial blank shape is then determined by cutting the outer edge of the trial blank whose shape is nearly matched with the trimming line. During the shaping the blank edge, tile movement of blank outer line is described with random variables to reduce the sensitivity of initial blank geometry. After performing 2-D FEM forming and springback simulations for selected sections and optimizing the trimming and springback amounts in terms of section length of the blank, the initial blank is finally determined. In order to see tile springback reduction in the initial blank determined by the proposed method, a stepped s-rail is stamped and the sppingback is measured. The springback of newly designed initial blank of stopped s-tail is tremendously reduced.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.143-152
• /
• 1995

This study was performed, by Finite Element Method, to evaluate the stress distribution on the periodontal tissue according to activation of the various closing loops and to predict the pattern of movement of maxillary incisors. At the same time, bull loop, key-hole loop, T-loop, combination loop and asymmetrical T-loop which were used for retraction of maxillary incisors was analysed by Finite Element Method. The following results were obtained 1. Horizontal force was the greatest in bull loop, the followed by key-hole loop, combination loop, T-loop and initial tooth movement exhibited uncontrolled tipping. 2. Horizontal force in asymmetrical T-loop compared to other closing loops was remarkably decreased, and the intrusive force on the incisors occurred. 3. As torque was increased, the moment was increased as a linear increment. 4. As moment was increased, initial movement of tooth changed to root movement from uncontrolled tipping.

• The Plant Pathology Journal
• /
• v.19 no.4
• /
• pp.217-220
• /
• 2003

Zucchini squash (Cucurbita pepo cv. Black Beauty) plants infected with A strain of Zucchini yellow mosaic virus (ZYMV-A) isolated from a hollyhock plant showed systemically severe mosaic symptom, similar to previously established Cu strain of ZYMV. However, initial symptom of squash infected by ZYMV-A strain was generally more severe than those infected by ZYMV-Cu. Using leaf-detachment assay, examination of kinetics of accumulation of the coat protein (CP) in systemic loaves of squash plants showed that CPs of ZYMV-A appeared earlier than those of ZYMV-Cu. However, both ZYMV-A and ZYMV-Cu showed similar kinetics of CP accumulation 7 days post-inoculation. These results indicate that different rates and initial severity of systemic symptom development were due to differences in the rate of movement rather than vims replication.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.343-347
• /
• 2008

Design of shape for visco-elastic vibration isolation elements, which are very cost-effective and so popular in many applications is frequently based on experiences, intuitions, or trial and errors. Such traditions in shape design make it difficult for drastic changes or new concepts to come out. In this paper, both topological method and shape optimization method are combined together to find out a most desirable isolator shape efficiently by using two commercial engineering programs. ABAQUS and MATLAB. The procedure is divided into two steps. At the first step, a topology optimization method is employed to find an initial shape. where density of either 0 or 1 for finite elements is used for physical realizability. At the second step, based on the initial shape, finer tuning of the shape is done by boundary movement method. An illustration of the procedure will be presented for a mount of an air-conditioner compressor system and the effectiveness will be discussed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.12
• /
• pp.1250-1255
• /
• 2008

Design of shape fur visco-elastic vibration isolation elements, which are very cost-effective and so popular in many applications is fi?equently based on experiences, intuitions, or trial and errors. Such traditions in shape design make it difficult for drastic changes or new concepts to come out. In this paper, both topological method and shape optimization method are combined together to find out a most desirable isolator shape efficiently by using two commercial engineering programs, ABAQUS and MATLAB. The procedure is divided into two steps. At the first step, a topology optimization method is employed to find an initial shape, where density of either 0 or 1 for finite elements is used fur physical realizability. At the second step, based on the initial shape, finer tuning of the shape is done by boundary movement method. An illustration of the procedure is presented fur a mount of an air-conditioner compressor system and the effectiveness is discussed.

• Steel and Composite Structures
• /
• v.46 no.5
• /
• pp.669-672
• /
• 2023

In this research, the researcher has examined the factors affecting the movement of the soccer ball and will show that the effects such as air resistance, altitude above sea level, wind, air pressure, air temperature, air humidity, rotation of the earth, changes in the earth's gravitational acceleration in different areas. It, the geographical length and latitude of the launch point, the change of gravitational acceleration with height, the change of pressure with height, the change of temperature with height and also the initial spin (Magnus effect) affect the movement of projectiles (especially soccer ball). We modelled th ball based on shell element and derive the motion equations by energy method. Finally, using numerical solution, the wave of the ball is studied. The influences of various parameters are investigated on wave propagation of the ball. Therefore, in short, it can be said that the main factors that play a major role in the lateral deviation of the hit ball are the initial spin of the ball and the wind.