DOI QR코드

DOI QR Code

Initial Blank Design Considering Springback Reduction

스프링백 저감을 고려한 초기블랭크 설계

  • Published : 2003.06.01

Abstract

The methodology to design initial blanks considering the reduction of both springback and flange trimming amounts is studied. Three dimensional forming analysis of a trial blank Is first carried out using FEM and the tentative Initial blank shape is then determined by cutting the outer edge of the trial blank whose shape is nearly matched with the trimming line. During the shaping the blank edge, tile movement of blank outer line is described with random variables to reduce the sensitivity of initial blank geometry. After performing 2-D FEM forming and springback simulations for selected sections and optimizing the trimming and springback amounts in terms of section length of the blank, the initial blank is finally determined. In order to see tile springback reduction in the initial blank determined by the proposed method, a stepped s-rail is stamped and the sppingback is measured. The springback of newly designed initial blank of stopped s-tail is tremendously reduced.

Keywords

References

  1. Proc. of 7th NAMRC Use of Slip Line Field Method in Deep Drawing of Large Iirregular Shaped Components Hazek,V.V.;K.Lange
  2. Proc. of ICTP v.3 A Software System for Designing Reasonable Blank for Box-shaped Deep-drawn Articles Chu.J.Y.;A.P.Dou
  3. 한국소성가공학회지 v.4 no.3 강-소성 유한요소 해석에서의 3차원 역추적 기법에 관한 연구 이진희;강범수;김병민
  4. Metallurgical and Materials Transactions A v.25A Anisotropic Plastic Potentials for Ploycrystals and Application to the Design of Optimum Blank Shapes in Sheet Forming Barlat F.;Chung K;Richmond O.
  5. 대한기계학회 논문집 A v.26 no.11 직접미분 설계민감도 해석을 이용한 박판금속성형 공정변수 최적화 - 설계민감도 해석 김세호;허훈
  6. 대한기계학회 논문집 A v.26 no.11 직접미분 설계민감도 해석을 이용한 박판금속성형 공정변수 최적화 - 공전변수 최적화 김세호;허훈
  7. J. Mat. Proc. Tech. v.63 Blank Design and Strain Prediction of Automobile Stamping Parts by an Inverse Finite Element Approach C.H.Lee;H.Huh https://doi.org/10.1016/S0924-0136(96)02700-8
  8. JSME International Journal. Series A v.38 no.4 Defermination of the Optimum Blank Shape when Deep Drawing Non-axisymmetric Cups Using a Finite Element Method Iseki H.;Sowerby R.
  9. Korean Society for Technology of Plasticity Spring Annual Meeting Opimum Blank Design of Atomobile Sub-Frame Kim J.Y.;Kim N.S.;Huh M.S.
  10. 한국소성가공학회지 v.9 no.3 민감도법을 이용한 최적블랭크 설계법의 일반적인 모양의 금형에의 적용 심현보;손기찬;황현태

Cited by

  1. Springback Control in the Forming Processes for High-Strength Steel Sheets vol.12, pp.8, 2003, https://doi.org/10.5228/KSPP.2003.12.8.718