• 제목/요약/키워드: initial guess

검색결과 99건 처리시간 0.021초

Modular approach model에 의한 분리공정의 모사 (Modular approach model for separation process simulation)

  • 김경숙;조영상
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
    • /
    • pp.372-376
    • /
    • 1989
  • One of the major difficulties with modular approach model of separation process simulation is initial guess problem. Only accurate initial guess make the problem converge and large computer memory and calculating time are required. In this study, we use the initial bottom guess value same as given feed condition and update the value the .theta.method. So we examine;(1)the problem converges using initial guess with large range, (2)computer memory and calculating time are reduced considerably.

  • PDF

Procedures for determination of elastic curve of simply and multiple supported beams

  • Biro, Istvan;Cveticanin, Livija
    • Structural Engineering and Mechanics
    • /
    • 제60권1호
    • /
    • pp.21-30
    • /
    • 2016
  • In this paper two procedures for determination of the elastic curve of the simply and multiple supported beams are developed. Determination of the elastic curve is complex as it requires to solve a strong nonlinear differential equation with given boundary conditions. For numerical solution the initial guess of the slope at the end of the beam is necessary. Two procedures for obtaining of the initial guess are developed: one, based on transformation of the supported beam into a clamped-free one, and second, on the linearization of the problem. Procedures are applied for calculating of elastic curve of a simply supported beam and a beam with three supports. Obtained results are compared. Advantages and disadvantages of both methods are discussed. It is proved that both suggested procedures give us technically accurate results.

전기 임피던스 단층촬영 기법에서 효과적인 초기치 설정을 통한 상 경계 추정 (Phase boundary estimation with effective initial guess in electrical impedance tomography)

  • 김봉석;김신;김경연
    • 전기전자학회논문지
    • /
    • 제16권3호
    • /
    • pp.211-216
    • /
    • 2012
  • 상 경계 추정 문제에서는 초기치에 따라 그 추정성능이 달라질 수 있다. 하지만 실제의 유동 공정에서는 초기치 설정을 위한 기포의 개수와 개략적인 위치 정보를 알 수가 없기 때문에, 초기치 설정 문제는 더욱 중요하다. 따라서 이 논문에서는 상 경계 추정을 위한 초기치 설정을 위해 우선 차이(difference) 복원 방법을 사용하여 미지의 저항률 분포를 추정하고, 중간모드(intermodes) 방법을 사용하여 적응 문턱치를 자동으로 계산하였으며, 이를 바탕으로 기포의 개수와 초기 위치를 결정하였다. 이로써 잡음이 존재하는 경우에도 기포의 상 경계를 잘 추정할 수 있는 방법을 개발하였다. 이에 몇 가지 시나리오를 설정하고 모의실험을 통해 제안한 방법의 상 경계 추정성능을 평가하였다.

직접 격자 사상법을 이용한 직사각컵 및 S-Rail 성형공정의 3차원 유한요소 역해석 (Three Dimensional Finite Element Inverse Analysis of Rectangular Cup and S-Rail Forming Processes using a Direct Mesh Mapping Method)

  • 김승호;허훈
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2001년도 추계학술대회 논문집
    • /
    • pp.81-84
    • /
    • 2001
  • An inverse finite element approach is employed for more capability to design the optimum blank shape from the desired final shape with small amount of computation time and effort. In some drawing or stamping simulation with inverse method, it is difficult to apply inverse scheme due to the large aspect ratio or steep vertical angle of inclination. The reason is that initial guesses are hard to make out with present method for those cases. In this paper, a direct mesh marring scheme to generate initial guess on the sliding constraint surface described by finite element patches is suggested for one step inverse analysis to calculate initial blank shape. Radial type mapping is adopted for the simulation of rectangular cup drawing process with large aspect ratio and parallel type mapping for the simulation of S-Rail forming process with steep vertical angle of inclination.

  • PDF

CONCERNING THE RADII OF CONVERGENCE FOR A CERTAIN CLASS OF NEWTON-LIKE METHODS

  • Argyros, Ioannis K.
    • 한국수학교육학회지시리즈B:순수및응용수학
    • /
    • 제15권1호
    • /
    • pp.47-55
    • /
    • 2008
  • Local convergence results for three Newton-like methods in Banach space are provided. A comparison is given between the three convergence radii. Then we show that using the largest convergence radius we can pick an initial guess from with we start the corresponding iteration. It turns out that after a finite number of steps we can always use the iterate found as the starting guess for a faster method, since this iterate will be inside the convergence domain of the new method.

  • PDF

직접격자 사상법을 이용한 S-rail 성형공정의 유한요소 역해석 및 성형효과를 고려한 충돌해석 (Finite Element Inverse Analysis of an S-rail Forming Process with Direct Mesh Mapping Method and Crash Analysis considering Forming Effects)

  • 김승호;허훈
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.125-128
    • /
    • 2002
  • The automotive industry have made an effort to reduce the weight of vehicle structures with increased safety, while initial model of the final product does not contain any prehistoric effects in a design stave. It takes lots of time to calculate forming effects that have great influences on the energy absorption of structures. In this paper, finite element inverse analysis is adopted to calculate forming effects, such as thickness variation and effective plastic strain as well as an initial blank shape with small amount of computation time. Crash analysis can be directly performed after inverse analysis of the forming process without remeshing scheme. The direct mesh mapping method is used to calculate an initial guess from the sliding constraint surface that is extracted from the die and punch set. Analysis results show that energy absorption of structures is increased with consideration of forming effects and finite element inverse analysis is usefully applicable to calculate forming erects of vehicle structures for the crash analysis.

  • PDF

유한요소법을 이용한 난류유동해석 (The Turbulent flow analysis by the Finite Element Method)

  • 황상무
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 춘계학술대회논문집
    • /
    • pp.253-256
    • /
    • 1999
  • The Streamline Upwind Petrov-Galerkin(SUPG) finite element method is used to solve the two-dimensional laminar and turbulent flow. The flow is simulated by averaged Navier-Stokes equations with a penalty function approach and the lograithmic(k-$\varepsilon$) turbulent model is employed to take into account its turbulent behavior. The near-wall viscous sub-layer model is employed to approach the dominant viscous effects in the near wall zones. To find a good-enough initial guess of the Newton-Raphson iteration solving Nonlinear Matrix the Incremental method is considered for momentum and the Incomplete logarithmic turbu-lent equations for Turbulence. The validation of our method is investigated in comparision with published experimental data.

  • PDF

Differential Evolution for Regular Orbit Determination

  • Dedhia, Pratik V.;Ramanan, R V.
    • International Journal of Aerospace System Engineering
    • /
    • 제7권2호
    • /
    • pp.6-12
    • /
    • 2020
  • The precise prediction of future position of satellite depends on the accurate determination of orbit, which is also helpful in performing orbit maneuvers and trajectory correction maneuvers. For estimating the orbit of satellite many methods are being used. Some of the conventional methods are based on (i) Differential Correction (DC) (ii) Extended Kalman Filter (EKF). In this paper, Differential Evolution (DE) is used to determine the orbit. Orbit Determination using DC and EKF requires some initial guess of the state vector to initiate the algorithm, whereas DE does not require an initial guess since a wide range of bounds for the design unknown variables (orbital elements) is sufficient. This technique is uniformly valid for all orbits viz. circular, elliptic or hyperbolic. Simulated observations have been used to demonstrate the performance of the method. The observations are generated by including random noise. The simulation model that generates the observations includes the perturbation due to non-spherical earth up to second zonal harmonic term.

점진 전개기법 및 유한요소 역해석법을 이용한 자동차 패널 트리밍 라인 설계 (Trimming Line Design using Incremental Development Method and Finite Element Inverse Method)

  • 정완진;박춘달;송윤준;오세욱
    • 소성∙가공
    • /
    • 제15권6호
    • /
    • pp.445-452
    • /
    • 2006
  • In most of automobile body panel manufacturing, trimming process is generally performed before flanging. To find feasible trimming line is crucial in obtaining accurate edge profile after flanging. Section-based method develops blank along manually chosen section planes and find trimming line by generating loop of end points. This method suffers from inaccurate results of edge profile. On the other hand, simulation-based method can produce more accurate trimming line by iterative strategy. In this study, new fast simulation-based method to find feasible trimming line is proposed. Finite element inverse method is used to analyze the flanging process because final shape after flanging can be explicitly defined and most of strain paths are simple in flanging. In utilizing finite element inverse method, the main obstacle is the initial guess generation for general mesh. Robust initial guess generation method is developed to handle genera] mesh with very different size and undercut. The new method develops final triangular mesh incrementally onto the drawing tool surface. Also in order to remedy mesh distortion during development, energy minimization technique is utilized. Trimming line is extracted from the outer boundary after finite element inverse method simulation. This method has many advantages since trimming line can be obtained in the early design stage. The developed method is verified by shrink/stretch flange forming and successfully applied to the complex industrial applications such as door outer flanging process.