• Structural Engineering and Mechanics
• /
• v.90 no.4
• /
• pp.357-370
• /
• 2024

Due to the fact that the mechanism of the effects of temperature and initial geometric imperfection on low-velocity impact problem of axially moving plates is not yet clear, the present paper is to fill the gap. In the present paper, the nonlinear dynamic behavior of axially moving imperfect graphene platelet reinforced metal foams (GPLRMF) plates subjected to lowvelocity impact in thermal environment is analyzed. The equivalent physical parameters of GPLRMF plates are estimated based on the Halpin-Tsai equation and the mixing rule. Combining Kirchhoff plate theory and the modified nonlinear Hertz contact theory, the nonlinear governing equations of GPLRMF plates are derived. Under the condition of simply supported boundary, the nonlinear control equation is discretized with the help of Gallekin method. The correctness of the proposed model is verified by comparison with the existing results. Finally, the time history curves of contact force and transverse center displacement are obtained by using the fourth order Runge-Kutta method. Through detailed parameter research, the effects of graphene platelet (GPL) distribution mode, foam distribution mode, GPL weight fraction, foam coefficient, axial moving speed, prestressing force, temperature changes, damping coefficient, initial geometric defect, radius and initial velocity of the impactor on the nonlinear impact problem are explored. The results indicate that temperature changes and initial geometric imperfections have significant impacts.

• ALGAE
• /
• v.20 no.2
• /
• pp.151-155
• /
• 2005

To obtain basic data, we investigated the effect of blade length on transplants, the transplanting method of Laminaria japonica for creating L. japonica resources and the number of transplanting plates with surviving L. japonica. The survival rate of L. japonica, blade length of transplants and drag force of transplanting plates were also researched. The number of transplanting plates with surviving L. japonica, the survival rate and blade length of 20 cm long-initial transplants were greater than those of 1.5, 5 and 10 cm long-initial transplants in an outdoor aquarium. At the depth of 4 m in the coastal waters, the number of transplanting plates with surviving transplants, the survival rate and the blade length of 30 cm long-initial transplants were higher than those of 10 and 20 cm longinitial transplants. The drag force is calculated by cording up sporophytes of L. japonica into the transplanting plates under water. The drag force in the case of a 2.18 kg-weight transplanting plate and in a current speed of 0.5 m${\cdot}s^{-1}$ for considering stability of the plate was 631.50 g to a concrete substratum on the seabed, 703.92 g to a shingle substratum, 788.00 g to a sand substratum, and 1018.30 g to a silt substratum. If we consider the stability and economic efficiency of the transplanting plate, the proper weight of the plate per one individual of 18.11 cm in blade width and 190.20 cm in total blade length is regarded as 508.2 g when it is calculated with the concrete substratum that shows the lowest drag force.

• Structural Engineering and Mechanics
• /
• v.63 no.2
• /
• pp.137-146
• /
• 2017

The size-dependent behavior of single walled carbon nanotubes (SWCNT) embedded in the elastic medium and subjected to the initial axial force is investigated using the mixed finite element method. The SWCNT is assumed to be Euler-Bernoulli beam incorporating nonlocal theory developed by Eringen. The mixed finite element model shows its great advantage of dealing with nonlocal behavior of SWCNT subjected to a concentrated load owing to the existence of two coefficients ${\alpha}_1$ and ${\alpha}_2$. This is the first numerical approach to deal with a puzzling fact of nonlocal theory with concentrated load. Numerical examples are performed to show the accuracy and efficiency of the present method. In addition, parametric study is carefully carried out to point out the influences of nonlocal effect, the elastic medium, and the initial axial force on the behavior of the carbon nanotubes.

• Structural Engineering and Mechanics
• /
• v.34 no.1
• /
• pp.1-14
• /
• 2010

The innovative intelligent fuzzy weighted input estimation method which efficiently and robustly estimates the unknown time-varying input force in on-line is presented in this paper. The algorithm includes the Kalman Filter (KF) and the recursive least square estimator (RLSE), which is weighted by the fuzzy weighting factor proposed based on the fuzzy logic inference system. To directly synthesize the Kalman filter with the estimator, this work presents an efficient robust forgetting zone, which is capable of providing a reasonable compromise between the tracking capability and the flexibility against noises. The capability of this inverse method are demonstrated in the input force estimation cases of the plate structure system. The proposed algorithm is further compared by alternating between the constant and adaptive weighting factors. The results show that this method has the properties of faster convergence in the initial response, better target tracking capability, and more effective noise and measurement bias reduction.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.1
• /
• pp.109-116
• /
• 2019

In this paper, the shape adjustment algorithm of the spoked wheel cable structures with retractable membrane system is studied. The initial tension of the membrane or cable is necessary to form the structure and its value is determined by the design shape. However, due to internal and external environmental influences, its shape may be different from the initial designed shape. In the case of the cable structures covered in this study, tension adjustment is necessary to maintain the designed shape because it influences the tension of the cable depending on the state of the retractable membrane. Therefore, we proposed an adjustment algorithm of an initial shape based on the force method. The effectiveness and validity of the methodology were examined through the applicable cable structures. The results of the shape adjustment analysis of the symmetric spoked wheel cable model were reliable and accurate results were obtained.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.2
• /
• pp.135-143
• /
• 2002

This study is to investigate its use by applying stainless steel wire mash reinforcement method of construction, which is newly developed, on the high strength concrete beam mixed with polymer-steel fiber. In this test, it is investigated and observed such as follows: the ultimate load, the initial flexure crack load, the initial diagonal tension crack load, the relation between load and deflection, load-strain relation, and also crack growth and fracture aspect by increasing load. The results of this test are; first, the stainless steel wire showed some useful reinforcement effects in multiplying the steel's resisting force of moment to the tensile force of beam or slab: second, the promoting strength and internal force was made in the process of the integration at the same reaction by using the penetrating polymer-mortar with an excellent durability and physical property. On the basis of this results, because such instances in applying stainless steel wire Mash reinforcement method of construction have been few so far, through the experimental investigation such as this test over and over again, the efficient and useful method must be developed for the practice.

• Advances in concrete construction
• /
• v.1 no.4
• /
• pp.319-340
• /
• 2013

This paper presents a comparative study on the double-K fracture parameters of concrete obtained using four existing analytical methods such as Gauss-Chebyshev integral method, simplified Green's function method, weight function method and simplified equivalent cohesive force method. Two specimen geometries: three point bend test and compact tension specimen for sizes 100-500 mm at initial notch length to depth ratios 0.25 and 0.4 are used for the comparative study. The required input parameters for determining the double-K fracture parameters are derived from the developed fictitious crack model. It is found that the cohesive toughness and initial cracking toughness determined using weight function method and simplified equivalent cohesive force method agree well with those obtained using Gauss-Chebyshev integral method whereas these fracture parameters determined using simplified Green's function method deviates more than by 11% and 20% respectively as compared with those obtained using Gauss-Chebyshev integral method. It is also shown that all the fracture parameters related with double-K model are size dependent.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.256-267
• /
• 2013

This study is conducted to improve the fitness of Air Force winter service uniforms pants through the development of a pants pattern drafting method and automatic pattern drafting program for mass customization. The initial study pattern drafting method is formed through an analyses of 4 kinds of conventional pants pattern drafting methods for education and 3 kinds of conventional pants patterns of Air Force apparels. The initial study pattern drafting method is converted into the final study pattern drafting method after twice conducting a wearing test. To verify the final study pants pattern, a motion adaptability evaluation, an ease amount evaluation and an appearance evaluation are conducted. The results of the final study patterns were better than conventional winter service uniforms in the motion adaptability evaluation and the appearance evaluation. However, the results show similar values between the final study patterns and conventional winter service uniform patterns in the ease amount evaluation. An automatic pattern drafting program was developed based on the final study pattern drafting method. The program allowed the achievement of customized pants patterns through the placement of customer body sizes into the size input window. It also provided two kinds of ease amount and two kinds of waist belt level options.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.421-428
• /
• 2003

For the initial equilibrium states of cable stayed bridges, this study presents a method to determine initial cable forces through successive iteration of the cable forces to minimize the errors between target moments or displacements and result of nonlinear analysis. Stay cables are modeled by truss elements and least square method was used to minimize the errors. In the structural characteristics of cable stayed bridges, a large axial force is introduced in the pylon and stiffening girder so fictitious section areas are assumed to determine initial cable forces accurately. To verify usefulness and validity of the proposed algorithm, some numerical analysis has been conducted and compared with the existing study.

• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.341-351
• /
• 2022

During bolted flange assembly, the contact stiffness of some areas of the joint surface may be low due to the elastic interaction. In order to improve the contact stiffness at the lowest position of bolted flange, the correlation model between the initial bolt pre-tightening force and the contact stiffness of bolted flange is established in this paper. According to the stress distribution model of a single bolt, an assumption of uniform local contact stiffness of bolted flange is made. Moreover, the joint surface is divided into the compressive stress region and the elastic interaction region. Based on the fractal contact theory, the relationship model of contact stiffness and contact force of the joint surface is proposed. Considering the elastic interaction coefficient method, the correlation model of the initial bolt pre-tightening force and the contact stiffness of bolted flange is established. This model can be employed to reverse determine the tightening strategy of the bolt group according to working conditions. As a result, this provides a new idea for the digital design of tightening strategy of bolt group for contact stiffness of bolted flange. The tightening strategy of the bolted flange is optimized by using the correlation model of initial bolt pre-tightening force and the contact stiffness of bolted flange. After optimization, the average contact stiffness of the joint surface increased by 5%, and the minimum contact stiffness increased by 6%.