Barley Yellow Mosaic Virus (BaYMV) caused significant reduction in barley yield and is difficult to control due to alive parasitic soil-borne fungus, Palmyra gamines that transmits the, virus. Previous studies have indicated that a virus-free soil could be infested by using virus-contaminated farming machineneries and implements. For the further confirmation of this finding, different proportions of BaYMV-infested soil were mixed into virus free soil. Three barley varieties (Hordum vulgarae, cv "Olbori", "Baegdong" and "Sacheon 6") were sown in pots treated with different rate of P. graminis-infested soil ranging from 0% to 100% in October 20, 2001. Results showed that BaYMV infection increased as the rate of infested soil increased. Initial symptoms were observed in a pots treated with 10% infested soil in all the 3 varieties of barley. "Olbori" had about 5% infection in 20% infested soil and about 10% infection in 40% or 50% infested soil and about 20% infection in 60% infested soil. In "Baegdong", the trend of BYMV occurrence was similar with "Olbori" but the time of severe infection was earlier than "Olbori". BaYMV infection in "Sacheon 6" was even earlier than "Baegdong" with much more severe symptoms than "Baegdong". The growth rate of barley was affected by about 19-22% when grown in 20% infested soil. As the rate of BaYMV infested soil increased the heading date was delayed but the maturing date was early in "Olbori" and "Sacheon 6". Also, reduction rate of culm length in 3 varieties increased with increase of infested soil content. However, "Olbori" showed the highest reduction. "Sacheon 6", have been characterized with long spike length, however was significantly reduced as the infested soil increased. On the other hand, spike length of "Olbori" was not significantly affected despite of increased of infested soil. The reduction rate of 1000 kernel weight was higher in large kernel size cultivar "Sacheon 6" and "Olbori" than small kernel size "Baegdong" as increase of BaYMV-infested soil content.
국내에서 논에서 콩 재배시 토양특성과 기후적인 영향으로 인해 발생할 수 있는 침수스트레스를 경감할 수 있는 재배적 방법을 모색하기 위해 연구를 진행했다. 연구결과를 요약하면 아래와 같다. 1. 침수처리 후 경장은 $GA_4$처리에서 제일 컸으며 ABA처리에서는 콩 식물체가 죽는 것으로 조사됐다. 침수처리와 $GA_4$를 제외한 식물생장조절물질(IAA, KT, ETP, SA, MeJA) 처리 사이에는 큰 차이가 없는 것으로 조사됐다. 2. 침수처리 후 엽록소 함량과 Fv/Fm은 IAA, KT, ETP과 같이 식물의 조직과 기관의 발달에 관련된 식물생장조절물질 처리에서 침수처리보다 개선된 결과를 보였다. 이와는 반대로 식물의 스트레스 반응을 조절하는 것으로 알려진 식물생장조절물질 SA와 MeJA처리에서는 침수처리보다 엽록소 함량과 Fv/Fm값이 감소하였다. 3. 위 모든 결과를 종합해 볼 때 콩에서 침수스트레스 저항을 유도에는 식물생장조절물질 KT와 ETP 처리가 효과적이다.
공기주입형 가압식 MBR 공정은 일반적인 침지식 MBR 공정과 마찬가지로 정상 운전조건에서 막 오염에 대한 제어 및 관리 기술뿐만 아니라 저유량, 저부하 조건과 같은 비정상 운전조건에서도 시설의 운영에 지장이 없도록 막 오염에 대한 제어 대책이 필요하다. $85m^3$/일 규모의 공기주입형 가압식 MBR 실증시설 운영을 통해 공기주입에 의한 분리막 오염 저감효과와 비상 시 운전조건에서 미생물에 의해 나타날 수 있는 막 오염 문제를 고찰하였다. 가압식 분리막에서 공기의 주입은 분리막 표면에서 공기방울에 의한 scouring 효과에 의해 TMP 상승 기간을 연장시키고 처리의 안정성과 높은 효율의 플럭스($40L/m^2{\cdot}h$ 이상)를 장시간 유지할 수 있는 것으로 분석되었다. 비정상 운전조건에서는 생물반응조에 PACl (53 mg/L as Al)을 주입한 경우 19%의 TMP 상승 감소효과가 있었으나 MBR 공정의 비정상 운전조건 지속에 따른 반복적인 PACl의 주입은 질산화 미생물의 활성도에 영향을 미치게 되어 궁극적으로 질소 처리효율이 악화될 수 있음을 회분식 배양 실험을 통해 확인하였다. 생물반응조에 PAC (0.6 g/L)을 주입한 경우에서는 연속운전 5일 동안 TMP 상승 없이 운전 초기 TMP인 $0.2kg/cm^2$을 유지하여 안정적으로 운전이 가능하였다. 이것은 미생물의 성장 저해조건에서 막 오염 원인물질을 유발하는 EPS와 같은 고분자 물질의 흡착에 따른 것으로 판단된다.
Thirty six Hanwoo steers (average BW, $564.5\;{\pm}\;25.7\;kg$; average age, approximately 23 months) were used to evaluate the effects of a mixture of eugenol (14%), thymol (1%) and malate (85%) on growth performance, beef quality and liver function in Hanwoo finishing steers fed a high-concentrate diet. A feeding trial was conducted for 7 months in National Agricultural Cooperative Federation farm located in Anseong, Korea. Steers were assigned randomly to one of three treatments: control (without additive supplementation), treatment 1 (0.05% additive of concentrate), treatment 2 (0.1% additive of concentrate). The results of this study showed that initial and final BW averaged 564 and 755 kg, respectively, and BW gain was significantly higher (P<0.05) for steers fed the additive mixture than for those fed no mixture (0.78 and 0.79 vs. 0.69 kg/d, respectively). Serum aspartate aminotransferase in the T2 treatment was decreased during the 24 to 31 months of age. Although supplementation of additives resulted in no substantial effect on carcass characteristics, it had a potential effect to improve feed efficiency and AST concentration in Hanwoo finishing steers fed a high-concentrate diet. In conclusion, a mixture of eugenol, thymol and malate has shown promise in improving feed efficiency and liver function in the finishing phase of Hanwoo steers.
본 연구에서는 상변화물질(PCM)을 반강성 포장체를 구성하는 초속경시멘트 페이스트 주입재에 적용하기 위한 연구를 수행하였다. 반강성포장용 주입재의 아크릴레이트를 PCM으로 치환에 따른 총 6종류의 주입재 배합에 대하여 경화 전 후 특성을 실험을 통해 평가하였다. 아크릴레이트를 PCM으로 치환하여 유동성을 평가한 결과 본 연구에서 목표로한 유하시간 10~13초를 모두 만족시킬 수 있는 것으로 나타났다. 응결시간의 경우 PCM으로 치환하더라도 초속경 시멘트의 성능을 확보할 수 있는 것으로 나타났고, PCM 치환 60%이상의 경우 초결시간이 다른 배합에 비해 1~2분 빨리 발생되었다. 압축강도 및 부착강도의 경우 Plain 배합과 유사한 강도특성을 나타내었고, 본 연구에서 목표로 하는 압축강도 36MPa, 부착강도 2MPa를 모두 만족시켰다. PCM으로 치환한 배합은 아크릴레이트만을 사용한 배합에 비해 우수한 염소이온침투저항성을 나타내었으나, OPC수준에는 미흡하였다. 반강성포장용 주입재에 대한 물리 역학적 성능평가 결과, 이 연구의 범위내에서는 PCM 대체율 20% 수준이 효과적인 것으로 판단된다.
본 연구의 목적은 3종의 전체산부식 상아질 접착 시스템에서 적절한 산부식 시간과 접착제의 침투 능력에 대해 규명하고자 하였다. 우식이 없는 54개의 제3대구치의 상아질 표면을 5, 15, 25초 동안 산부식하고 산부식형 접착제 3종 (Scotchbond multipurpose, Single Bond, One Step) 을 도포한 후 복합레진을 충전하였다. 각 시편은 0회 (대조군) 또는 2000회 열순환 ($5^{\circ}C\;-\;55^{\circ}C$) (실험군) 후 미세인장강도를 측정하고 파단면을 관찰하여 다음과 같은 결론을 얻었다. 1. 실험군은 대조군에 비하여 결합강도가 감소하였으며, 특히 25초 산부식한 SM 및 SB군에서는 통계학적 유의차를 나타내었다. 2. 열순환 처리한 SM군과 SB군의 경우, 25초 간 산부식한 군이 5초 간 산부식한 군과 15초 간 산부식한 군에 비해 유의성 있게 낮은 결합강도를 나타냈다 (p < 0.05). 3. OS군의 경우, 산부식 시간 및 열순환 여부에 따른 유의성 있는 차이가 나타나지 않았다 (p > 0.05). 상아질 접착의 내구성은 접착제의 용매와 산부식 시간에 의해 영향을 받으며 특히, ethanol-based adhesive를 사용할 때 과도한 산부식은 유의해야 한다.
항암제가 함유된 생분해성 고분자 디바이스를 이용한 국소전달요법은 종양 부위에 고농도로 약물을 전달시킬 수 있는 이유로 약물의 효율성을 증가시킬 수 있다. 1,3-bis(2-chloroethyl)-1-nitro-sourea (BCNU, carmustine)는 뇌종양 치료를 위하여 가장 일반적으로 사용되는 화학요법적 약물이다. 표적 부위까지 항암제를 효과적으로 전달하기 위한 이식제의 설계는 중요한 인자이다. 본 연구에서 약물의 방출경향을 조절하기 위해서 생분해성 웨이퍼의 첨가제와 다양한 제형 변화로부터 BCNU의 방출패턴을 조사하였다. 각각 3.85, 10, 20 및 30%의 BCNU를 함유한 PLGA 웨이퍼를 다양한 형태(직경 3, 5 및 10 mm, 두께 0.5, 1 및 2 mm)로 직접 압축성형법에 의해 제조하였다. 생체외 방출실험에서 BCNU 함유 PLGA 웨이퍼로부터 약물 방출거동은 웨이퍼의 포기 약물 함유량, 무게, 직경, 두께, 부피, 표면적 및 PLGA 분자량뿐만 아니라 첨가제의 종류와 같은 다양한 변수로 조절했다. 웨이퍼로부터 약물의 방출은 BCNU 함유량 및 염화나트륨 (NaCl)과 폴리엔비닐피롤리돈 (PVP)이 증가할수록 촉진되었다. 또한, BCNU가 함유된 PLGA 웨이퍼의 무게와 형태변화에 대한 조사를 통하여 다양한 기하학적 인자들과 첨가제의 효과를 고찰하였다.
골 결손 치료를 위해 생분해성 고분자인 PLGA에 골다공증 치료제인 이프리플라본(IP)을 함유한 미립구를 O/W 유화 용매 증발법으로 제조하였으며, 생체외 방출실험에서 IP 방출량은 HPLC로 분석하였다. SEM을 이용하여 미립구에 부착된 세포의 거동을 확인하였으며, IP가 세포에 미치는 독성평가는 CCK-8 분석방법을 이용하여 측정하였다. 골 형성 지표인 ALP 활성도를 측정하였으며, 배양된 BMSCS의 골세포로의 표현형을 확인하기 위하여 RT-PCR을 수행하였다. 방출결과에서 IP 방출은 거의 40일 이상으로 지속적이었으며, IP를 함유한 미립구에서의 세포의 부착, 성장 등이 잘 이루어짐을 확인하였고, ALP 활성도 및 RT-PCR 분석결과에서도 단독의 PLGA 미립구보다 IP를 함유한 미립구에서의 값이 더 높은 것을 확인할 수 있었다. 본 실험결과를 바탕으로 향후 서방성 제제화에 있어서 IP/PLGA 미립구를 응용하게 되면 국소지향성 골분화 주사용 지지체로서 중요한 역할을 할 것으로 보인다.
서방성방출을 위해 잘토프로펜을 함유한 미립구를 oil-in-water(O/W) 에멀젼용매 증발법을 이용하여 제조하였다. 제조온도, 교반속도, 초음파분쇄기의 강도, 약물농도, POX의 분자량과 농도, 유화제 농도 등의 제조조건에 따른 잘토프로펜의 방출거동을 평가하였다. 잘토프로펜을 함유한 POX 미립구의 물리화학적 성질 및 형태를 X선 회절분석법(XRD)과 시차주사열량계(DSC), 적외선 분광분석기(FTIR), 주사현미경(SEM)을 통해 연구하였다. 이러한 연구 결과로부터 제조조건들에 따른 미립구의 특성을 확인할 수 있었다. 또한 POX 미립구의 분해성을 10일 동안 in vitro 실험을 통해 조사하였다. 본 연구를 통해 잘토프로펜을 함유한 POX 미립구를 최적화된 용매증발방법으로 제조하였고, 이 미립구로부터 약물의 방출제어를 확인할 수 있었다.
Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.