• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.776-781
• /
• 2010

In the ship-handling simulator, it is important for a ship manoeuvring model to represent the dynamic characteristic of a ship and to be simple for reducing calculation time. Especially, even if principal dimensions of a ship are given in initial design stage, or manoeuvring test data are only given by model or real ship's trials, simulations are often needed to check the manoeuvrability of a ship. In this paper, a simple manoeuvring model based on turning test data of a ship is mathematically developed. And the simulation results are verified by comparing with turning test results of a real ship.

• 한국태양에너지학회 논문집
• /
• 제32권1호
• /
• pp.56-66
• /
• 2012

This study evaluated the economic benefits by comparing Cooling-Heating System with the existing system in the public library. The building's annual energy consumption was measured by adding the figures of the absorber chillers, the air conditioners and heaters in the building. The total amount of annual energy consumption was 143.51RT in air-conditioning and 83.66RT in heating. So, We made the capacity of geothermal heat pumps three 50RTs in order to check up this system. In order to estimate each construction and equipment cost and to evaluate economical efficiency, LCC(Life Cycle Cost) method was used and the service life of the building was sixty years. The result of analysis was that the geothermal cooling-heating system was more efficient than the existing system in public library.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.560-567
• /
• 1998

This paper concerned about a imputed color printed material image in camera to decrease noise and distortion by processing median filtering with input image to identical condition. Also this paper proposed the way of compares a normal printed material with an abnormal printed material color tone with trained a learning of the error back-propagation to block classification by extracting five place from identical block(3${\times}$3) of color printed material R, G, B value. As a representative algorithm of multi-layer perceptron the error Back-propagation technique used to solve complex problems. However, the Error Back-propagation is algorithm which basically used a gradient descent method which can be converged to local minimum and the Back Propagation train include problems, and that may converge in a local minimum rather than get a global minimum. The network structure appropriate for a given problem. In this paper, a good result is obtained by improve initial condition and adjust th number of hidden layer to solve the problem of real time process, learning and train.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.47-59
• /
• 1994

The irrigation reservoir operation models developed were tested with weather and field data, and the sensitivity of the water requirement deficiency indices(WRDI) were checked with different initial reservoir storages, irrigated areas, and other water uses from the reservoir storage. Seven reservoir release rules were applied to Yongseol Reservoir. Twenty year WRDIs were computed to check performances of those reservoir release rules. Mean WRDIs were 138, 198, 198, 200, 240, 344, and 1033mm for ROM, TOS, COS, CRR, MSC, FAS, and SRC, respectively. The results indicated that ROM contributes consistently to higher operation efficiencies of an irrigation reservoir. The test results of LFROM and SFROM showed that reservoir operation with the proposed optimization technique ROM would be better suited for an irrigation district than those with the other rules. And the proposed model could be used as a tool to improve reservoir operations.

• Earthquakes and Structures
• /
• 제16권4호
• /
• pp.375-389
• /
• 2019

During earthquakes, the performance of structures needs to be evaluated, which provides guidance for selecting suitable retrofitting schemes. The purpose of this paper is to accomplish seismic assessment of a simple steel residential building. Once the responses of the system are determined, the scope of the study extends to evaluate selected retrofitting strategies that are intended to rehabilitate the flaws of the structure under prescribed ground motions with high probability of occurrence at the site. After implementing the retrofits, seismic assessment of the upgraded structure is carried out to check if the remediation at various seismic performance levels is acquired or not. Outcomes obtained from retrofitted scenarios are compared to the results obtained from the initial un-retrofitted configuration of the structure. This paper presents the process for optimal selection of rehabilitation solutions considering the cost of implementation, downtime and disruption to property owners while improving the seismic performance level of the structure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.23-24
• /
• 2020

In this study, the concrete compressive strength estimation system Concrete IoT Management System (hereinafter referred to as CIMS) was developed, and CIMS was applied to domestic field structure slabs and wall concrete to check whether CIMS is practically available and to estimate the accuracy of the initial strength estimation of concrete. As a result, it shows a very high correlation when the compressive strength of the specimen for structural management is compared with the estimated strength of CIMS in terms of integrated temperature, and it is expected to be gradually applied to domestic construction sites in the future.

• 대한방사선치료학회지
• /
• 제32권
• /
• pp.73-83
• /
• 2020

목 적: 본 연구에서는 췌장암 환자 MRgART(Magnetic Resonance-guided Adaptive Radiation Therapy)시 복부가스용적변화로 인하여 Image fusion 과정에서 생길 수 있는 조직과 가스의 전자밀도 매칭오류를 확인하고 그에 따른 선량 변화와 치료시간에 미치는 영향을 확인해 보고자 한다. 대상 및 방법: 본원에서 ViewRay MRIdian System (Viewray, USA)를 이용하여 MRgART를 시행한 췌장암 환자 중 최초 simulation시와 비교하여 복부가스용적감소가 발생한 환자를 대상으로 Initial plan과 복부가스 전자밀도를 수정한 AGC(Abdominal gas correction) plan의 PTV와 OAR선량을 비교하였고, 총4회 Adaptive 치료에서 환자의 Beam ON(%)을 확인하여 복부가스용적이 치료시간에 미치는 영향을 확인해 보았다. 결 과: Initial plan에서의 Mean, Minimum, Maximum 선량과 AGC plan의 Mean, Minimum, Maximum 선량평균값을 비교하였을 시 OAR에서는 -7~0.1%의 선량차이를 보였으며 평균 0.16% 감소하였고, PTV에서는 4.5~5.5%의 선량이 감소하였으며 평균 5.1%의 선량이 감소하였다. Adaptive치료 시 복부가스용적이 증가할수록 Beam ON(%)이 감소하였다. 결 론: Initial plan과 Adaptive plan간 복부가스용적 변화는 Adaptive plan시 전자밀도매칭 오류로 이어질 수 있으며 이는 PTV와 주변OAR의 선량분포를 변화시키므로 Adaptive plan시 영상 fusion 과정에서 가스용적을 보정한 정확한 전자밀도매칭은 필수적인 요소이다. 또한 복부가스용적이 커질수록 Beam ON(%)이 감소하여 환자의 Motion error로 인한 치료시간이 증가될 수 있다. 따라서 MRgART시에는 전자밀도매칭을 확인하고 복부가스의 가변성을 최소화 하여야 한다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.230-238
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64) and tool kit on the ESPRIT. Transference of data among AutoCAD, I-DEAS Master Series Drafting, and ESPRIT is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of six modules, which are input and shape treatment, production feasibility check, strip-layout, die-layout, modelling, and post-processor modules. The system can design process planning and Die design considering several factors and generate NC data automatically according to drawings of die-layout module. As forming process of high precision product and die design system using 2-D geometry recognition are integrated with technology of process planning, die design, and CAE analysis, standardization of die part in die design and process planning of high pression product for semiconductor lead frame is possible to set. Results carried out in each module will provide efficiencies to the designer and the manufacturer of lead frame, semiconductor.

• 한국터널지하공간학회 논문집
• /
• 제16권2호
• /
• pp.173-180
• /
• 2014

세그먼트 설계시, 축력과 휨모멘트가 주로 고려되는 하중이다. 두개의 하중에서 축력이 모멘트 보다 상대적으로 매우 크기 때문에 전단면이 압축상태에 있으며, 이는 균열 폭을 줄이는 효과가 있다. 그러나 콘크리트 구조물의 사용성 검토에서 축력은 고려하지 않고 있기 때문에 설계는 사용성에 지배되고, 사용성을 만족시키기 위하여 소요 철근량을 증가시키게 된다. 본 논문에서는 축력이 세그먼트의 사용성에 미치는 영향을 시험과 단면해석을 통하여 분석하였다. 세그먼트에 대한 시험을 수행하였으며, 초기균열저항성능에 대하여 고찰하였다. 분석결과 사용성 분석에서 축력을 고려함으로서 더욱 합리적인 설계가 가능한 것을 확인할 수 있었다.

• Clinical and Experimental Pediatrics
• /
• 제59권1호
• /
• pp.30-34
• /
• 2016

Purpose: Although Bednar's aphthae are common and regress spontaneously, these lesions may lead to feeding intolerance and are often misdiagnosed, rendering examinations useless. This study sheds new light on the clinical features of Bednar's aphthae. Methods: Sixteen neonates and infants were newly diagnosed with Bednar's aphthae via routine health check-ups in an outpatient clinic. Medical records were retrospectively reviewed, and the following parameters were analyzed; sex, gestational age, birth weight, mode of delivery, and perinatal problems. A physical examination was carried out during the next outpatient visit to examine the healing process and check for the existence of scars or complications. Results: Initial presentation included changes in feeding habits (n=10), longer feeding time, reduced intake, and increased irritability. In 6 patients, Bednar's aphthae were discovered incidentally, without prior symptoms. Feeding posture and method of feeding are important causes of Bednar's aphthae. Eleven patients were fed in a horizontal position, whereas 5 patients were fed in a semiseated position. Fifteen patients were bottle-fed, whereas 1 patient was exclusively breastfed. After correcting the feeding position, the ulcerative lesions disappeared within 1 month of diagnosis. During the follow-up period, lesions did not recur in any of the patients. Conclusion: This study suggests that Bednar's aphthae are caused by mechanical pressure. A diagnosis of Bednar's aphthae should be considered when lesions are found on the palate of infants and when symptoms seem to be feeding related. Proper education of parents can both treat Bednar's aphthae and easily prevent its recurrence.