1 |
Elnashai, A.S. and Di Sarno, L. (2008), Fundamentals of Earthquake Engineering, Wiley, New York.
|
2 |
El-Tawil, S., Vidarsson, E., Mikesell, T. and Kunnath, S.K. (1999), "Inelastic behavior and design of steel panel zones", J. Struct. Eng., 125(2), 183-193.
DOI
|
3 |
Faccioli, E., Paolucci, R. and Rey, J. (2004), "Displacement spectra for long periods", Earthq. Spectra, 20(2), 347-376.
DOI
|
4 |
Faella, C., Martinelli, E. and Nigro, E. (2004), "Seismic assessment and retrofitting of r.c. existing buildings", Proceedings of 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August.
|
5 |
Fardis, M. (2007), "Guidelines for displacement-based design of buildings and bridges (LESSLOSS Report-2007/05)", IUSS Press, Pavia, Italy.
|
6 |
FEMA-356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, DC.
|
7 |
FEMA-450 (2003), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, Federal Emergency Management Agency, Washington, DC.
|
8 |
Filiatrault, A. and Cherry, S. (1990), "Seismic design spectra for friction damped structures", J. Struct. Eng., 116(5), 1334-1355.
DOI
|
9 |
Ghobarah, A. and Abou-Elfath, H. (2001), "Rehabilitation of a reinforced concrete frame using eccentric steel bracing", Eng. Struct., 23(7), 745-755.
DOI
|
10 |
Griffith, M. (2008), "Seismic retrofit of RC frame buildings with masonry infill walls: literature review and preliminary case study", JRC Scientific and Technical Reports, The Institute for the Protection and the Security of the Citizen, Ispra, Italy.
|
11 |
Kim, J., Choi, H. and Min, K.W. (2003), "Performance-based design of added viscous dampers using capacity spectrum method", J. Earthq. Eng., 7(1), 1-24.
DOI
|
12 |
Lavan, O., Cimellaro, G.P. and Reinhorn, A.M. (2008), "Noniterative optimization procedure for seismic weakening and damping of inelastic structures", J. Struct. Eng., 134(10), 1638-1648.
DOI
|
13 |
Kim, K.D. and Engelhardt, M.D. (2002), "Monotonic and cyclic loading models for panel zones in steel moment frames", J. Constr. Steel Res., 58(5), 605-635.
DOI
|
14 |
Kowalsky, M.J., Priestley, M.J.N. and MacRae, G.A. (1995), "Displacement-based design of RC bridge columns in seismic regions", Earthq. Eng. Struct. Dyn., 24(12), 1623-1643.
DOI
|
15 |
Krawinkler, H. and Mohasseb, S. (1987), "Effects of panel zone deformations on seismic response", J. Constr. Steel Res., 8, 233-250.
DOI
|
16 |
Mangalathu, S. and Burton, H. (2018), "Machine learning based damage detection of residential buildings", Proceedings of Neural Information Processing Systems 2018 (NeurIPS 2018), Montreal, Canada.
|
17 |
Ni, P. (2012), "Non-linear dynamic soil-structure interaction for displacement-based seismic assessment of bridges", Master's Thesis, European School for Advanced Studies in Reduction of Seismic Risk (ROSE School), Pavia, Italy.
|
18 |
Mangalathu, S. and Jeon, J.S. (2018), "Classification of failure mode and prediction of shear strength for reinforced concrete beam-column joints using machine learning techniques", Eng. Struct., 160, 85-94.
DOI
|
19 |
Martinez-Rodrigo, M.D. and Filiatrault, A. (2015), "A case study on the application of passive control and seismic isolation techniques to cable-stayed bridges: A comparative investigation through non-linear dynamic analyses", Eng. Struct., 99, 232-252.
DOI
|
20 |
Mylonakis, G. and Gazetas, G. (2000), "Seismic soil-structure interaction: beneficial or detrimental?", J. Earthq. Eng., 4(3), 277-301.
DOI
|
21 |
Ni, P., Mangalathu, S. and Liu, K. (2018), "Enhanced fragility analysis of buried pipelines through Lasso regression", Acta Geotech., doi: 10.1007/s11440-018-0719-5.
|
22 |
Ni, P. (2013), "Effects of soil-structure interaction on direct displacement-based assessment procedure of multi-span reinforced concrete bridges", Eur. J. Environ. Civil Eng., 17(7), 507-531.
DOI
|
23 |
Ni, P. (2014), "Seismic assessment and retrofitting of existing structure based on nonlinear static analysis", Struct. Eng. Mech., 49(5), 631-644.
DOI
|
24 |
Ni, P. and Mangalathu, S. (2018), "Fragility analysis of gray iron pipelines subjected to tunneling induced ground settlement", Tunn. Undergr. Sp. Tech., 76, 133-144.
DOI
|
25 |
Pampanin, S., Christopoulos, C. and Priestley, M.J.N. (2002), "Residual deformations in the performance-based seismic assessment of frame structures", ROSE Research Report 2002/02, IUSS Press, Pavia, Italy.
|
26 |
Ni, P., Mangalathu, S. and Yi, Y. (2018), "Fragility analysis of continuous pipelines subject to transverse permanent ground deformation", Soils Found., 58(6), 1400-1413.
DOI
|
27 |
Ni, P., Petrini, L. and Paolucci, R. (2014), "Direct displacementbased assessment with nonlinear soil-structure interaction for multi-span reinforced concrete bridges", Struct. Infrastr. Eng., 10(9), 1211-1227.
DOI
|
28 |
Ni, P., Wang, S., Jiang, L. and Huang, R. (2012), "Seismic risk assessment of structures using multiple stripe analysis", Appl. Mech. Mater., 226, 897-900.
DOI
|
29 |
Panagiotakos, T.B. and Fardis, M.N. (2001), "A displacementbased seismic design procedure for RC buildings and comparison with EC8", Earthq. Eng. Struct. Dyn., 30(10), 1439-1462.
DOI
|
30 |
Paolucci, R., Figini, R. and Petrini, L. (2013), "Introducing dynamic nonlinear soil-foundation-structure interaction effects in displacement-based seismic design", Earthq. Spectra, 29(2), 475-496.
DOI
|
31 |
Sadan, O.B., Lorenza, P. and Calvi, G.M. (2013), "Direct displacement-based seismic assessment procedure for multispan reinforced concrete bridges with single-column piers", Earthq. Eng. Struct. Dyn., 42(7), 1031-1051.
DOI
|
32 |
Pinho, R. (2001), "Seismic assessment and upgrading of reinforced concrete buildings", Proceedings of 20th European Regional Earthquake Engineering Seminar, Sion, Switzerland, September.
|
33 |
Priestley, M.J.N. (1997), "Displacement-based seismic assessment of reinforced concrete buildings", J. Earthq. Eng., 1(1), 157-192.
DOI
|
34 |
Priestley, M.J.N. and Kowalsky, M.J. (2000), "Direct displacement-based seismic design of concrete buildings", Bull. N.Z. Nat. Soc. Earthq. Eng., 33(4), 421-444.
|
35 |
Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-based Seismic Design of Structures, IUSS Press, Pavia, Italy.
|
36 |
Priestley, M.J.N., Grant, D.N. and Blandon, C.A. (2005), "Direct displacement-based seismic design", Proceedings of New Zealand Society for Earthquake Engineering Conference, Wairakei, New Zealand, March.
|
37 |
Sahu, D., Nishanth, M., Dhir, P., Sarkar, S., Davis, R. and Mangalathu, S. (2019), "Stochastic response of reinforced concrete buildings using high dimensional model representation", Eng. Struct., 179, 412-422.
DOI
|
38 |
SEAOC (1995), Vision 2000: Performance based seismic engineering of buildings, Structural Engineers Association of California, Sacramento, California, U.S.
|
39 |
SeismoSignal (2011), A Computer Program for Signal Processing of Strong Motion Data, Available from URL: http://www.seismosoft.com
|
40 |
Singh, M.P. (2006), "Seismic protection of counterweight-rails in elevators in buildings", Earthq. Eng. Struct. Dyn., 35(3), 385-394.
DOI
|
41 |
Cardone, D., Perrone, G. and Sofia, S. (2011), "A performancebased adaptive methodology for the seismic evaluation of multispan simply supported deck bridges", Bull. Earthq. Eng., 9(5), 1463-1498.
DOI
|
42 |
British Standards (2006), Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels, EN- 10219-1, BSI, London, UK.
|
43 |
Calvi, G.M. and Kingsley, G.R. (1995), "Displacement based seismic design of multi-degree of freedom bridge structures", Earthq. Eng. Struct. Dyn., 24(9), 1247-1266.
DOI
|
44 |
Calvi, G.M. and Sullivan, T.J. (2009), A Model Code for the Displacement-based Design of Structures, IUSS Press, Pavia, Italy.
|
45 |
Ciampoli, M. and Pinto, P.E. (1995), "Effects of soil-structure interaction on inelastic seismic response of bridge piers", J. Struct. Eng., 121(5), 806-814.
DOI
|
46 |
Smerzini, C., Galasso, C., Iervolino, I. and Paolucci, R. (2014), "Ground motion record selection based on broadband spectral compatibility", Earthq. Spectra, 30(4), 1427-1448.
DOI
|
47 |
Carr, A.J. (2005), "Ruaumoko2D: Time history analysis of nonlinear two-dimensional structures, and Post-processor for Ruaumoko: Dynaplot, User manual", Computer Program Library, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
|
48 |
CEN (2002), Eurocode 1: Actions on structures-Part 1-1: General actions-Densities, self-weight, imposed loads for buildings, EN 1991-1-1, Comite Europeen de Normalisation, Brussels, Belgium.
|
49 |
CEN (2003), Eurocode 8: Design of structures for earthquake resistance-Part 1: General rules, seismic actions and rules for buildings, prEN 1998-1, Comite Europeen de Normalisation, Brussels, Belgium.
|
50 |
Christopoulos, C. and Filiatrault, A. (2006), Principles of Passive Supplemental Damping and Seismic Isolation, IUSS Press, Pavia, Italy.
|
51 |
Bommer, J.J. and Elnashai, A.S. (1999), "Displacement spectra for seismic design", J. Earthq. Eng., 3(1), 1-32.
DOI
|
52 |
Dhakal, R.P., Mander, J.B. and Mashiko N. (2006), "Identification of critical ground motions for seismic performance assessment of structures", Earthq. Eng. Struct. Dyn., 35(8), 989-1008.
DOI
|
53 |
Tolis, S.V. and Faccioli, E. (1999), "Displacement design spectra", J. Earthq. Eng., 3(1), 107-125.
DOI
|
54 |
Tubaldi, E. and Dall'Asta, A. (2011), "A design method for seismically isolated bridges with abutment restraint", Eng. Struct., 33(3), 786-795.
DOI
|
55 |
Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514.
DOI
|
56 |
Cimellaro, G.P., Lavan, O. and Reinhorn, A.M. (2009), "Design of passive systems for control of inelastic structures", Earthq. Eng. Struct. Dyn., 38(6), 783-804.
DOI
|
57 |
Constantinou, M.C. (2004), "Friction pendulum double concave bearing", Technical Report, University at Buffalo, State University of New York, Buffalo, NY.
|
58 |
Constantinou, M.C., Soong, T.T. and Dargush, G.F. (1998), "Passive energy dissipation systems for structural design and retrofit", MCEER-98-MN01, Multidisciplinary centre for earthquake engineering research, University of Buffalo, Buffalo, New York, U.S.
|
59 |
Della Corte, G., De Risi, R. and Di Sarno, L. (2013), "Approximate method for transverse response analysis of partially isolated bridges", J. Bridge Eng., 18(11), 1121-1130.
DOI
|
60 |
Di Sarno, L. and Elnashai, A.S. (2003), "Special metals for seismic retrofitting of steel buildings", Prog. Struct. Eng. Mater., 5(2), 60-76.
DOI
|
61 |
Di Sarno, L. and Elnashai, A.S. (2005), "Innovative strategies for seismic retrofitting of steel and composite structures", Prog. Struct. Eng. Mater., 7(3), 115-135.
DOI
|
62 |
Di Sarno, L. and Elnashai, A.S. (2009), "Bracing systems for seismic retrofitting of steel frames", J. Constr. Steel Res., 65(2), 452-465.
DOI
|
63 |
Di Sarno, L. and Manfredi, G. (2012), "Experimental tests on fullscale RC unretrofitted frame and retrofitted with bucklingrestrained braces", Earthq. Eng. Struct. Dyn., 41(2), 315-333.
DOI
|
64 |
Elenas, A. and Vasiliadis, L. (2002), "Retrofit of a stone masonry school building damaged during the Athens earthquake of 7 September 1999", Proceedings of 12th European Conference on Earthquake Engineering, London, UK, September.
|