• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.2
• /
• pp.117-120
• /
• 2002

The effect of cell density on cell growth was investigated in a suspension batch culture of hybridoma cells. The specific growth rate was found to increase with increasing initial cell density and then to decrease with further increases in initial cell density. In order to quantitatively describe the dependence of specific growth rate on cell density, a kinetic model is proposed, which satisfactorily represents the experimental data.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.5
• /
• pp.410-416
• /
• 2021

The initial electrochemical performance of ceramic fuel cell with thin-film electrolyte was evaluated in terms of peak power density ratio, open circuit voltage ratio, and activation/ohmic resistance ratios at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively. The peak power density ratio reduced as ~17% for 40 minutes, which rapidly decreased in the early stage of the performance evaluation but gradually decreased. The open circuit voltage ratio decreased with respect time; however, its time behavior was remarkably different with the reduction behavior of the peak power density ratio. The activation resistance ratio increased as ~15% for 40 minutes, which was almost similar with the time behavior of the peak power density ratio.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.5
• /
• pp.340-346
• /
• 2021

The initial electrochemical performance of ceramic fuel cell with thin-film electrolyte fabricated by plasma-enhanced atomic layer deposition method was evaluated in terms of peak power density ratio, open circuit voltage ratio, and activation/ohmic resistance ratios at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively. The peak power density ratio reduced as ~52% for 30 min, which continually decreased as time increased but degradation rate gradually decreased. The open circuit voltage ratio decreased with respect time; however, its behavior was evidently different from the reduction behavior of the peak power density. The activation resistance ratio increased as ~127% for 30 min, which was almost similar with the reduction behavior of the peak power density ratio.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.539-544
• /
• 2013

The effects of culture depth (2-10 cm) and cell density on the growth rate and biomass productivity of Chlorella sp. XQ-200419 were investigated through the use of a self-designed open circular pond photobioreactor-imitation system. With increases in culture depths from 2 to 10 cm, the growth rate decreased significantly from 1.08 /d to 0.39 /d. However, the biomass productivity only increased slightly from 8.41 to 11.22 $g/m^2/d$. The biomass productivity (11.08 $g/m^2/d$) achieved in 4 cm culture with an initial $OD_{540}$ of 0.95 was similar to that achieved in 10 cm culture with an initial $OD_{540}$ of 0.5. In addition, the duration of maximal areal productivity at a 4 cm depth was prolonged from 1 to 4 days, a finding that was also similar to that of the culture at a 10 cm depth. In both cases, the initial areal biomass densities were identical. Based on these results and previous studies, it can be concluded that the influence of culture depth and cell density on areal biomass productivity is actually due to different areal biomass densities. Under suitable conditions, there are a range of optimal biomass densities, and areal biomass productivity reaches its maximum when the biomass density is within these optimal ranges. Otherwise, biomass productivity will decrease. Therefore, a key factor for high biomass productivity is to maintain an optimal biomass density.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.272-278
• /
• 1998

Cell recovery from high cell density broths of Alcaligenes eutrophus by pretreatment with aluminum-based coagulants such as aluminum sulfate, polyaluminum hydrooxide chloride silicate (PACS), and polyaluminum hydrooxide chloride (Hi-PAX) was carried out. Cells coagulated with coagulants could be successfully recovered above 95-99% by centrifugation or filtration. The optimum initial pH of fermentation broths for cell recovery was in the range of 10 to 12. Optimum coagulants dosage for cell recovery increased with increasing of cell concentrations (21-160 g/L). The optimum coagulant dosages to recover cells with more than 95% cell recovery by centrifugation for the cell concentrations ranged 21-160 g/L were as follows: aluminum sulfate, 416-1708 mg Al/L; PACS, 211-826 mg Al/L; Hi-PAX, 320-960 mg Al/L. At optimum conditions for the coagulation of cells, centrifugal forces for 95% of cell recovery were dependent on the cell concentration. The centrifugal forces at 82 g/L and 160 g/L of cell concentration were only 45${\times}$g and 1600${\times}$g, respectively.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.5
• /
• pp.350-354
• /
• 2000

The growth promotion of a Taxus brevifolia cell suspension culture was investigated using conditioning factors. The conditioning factors produced and secreted from cultured cells usually stimulate cell division and the production of secondary metabolites. Therefore, the effective incubation time for the optimal secretion of conditioning factors was firstly determined for the promotion of cell growth. Conditioned media obtained by cultivating for 2 and 5 days showed the promotion of initial cell growth during the early cell growth period. However, the positive effect of the conditioning factors on the initial cell growth did not continue because of the depletion of the medium nutrients. Accordingly, the addition of a carbon source to the conditioned medium prolonged the positive effect on the cell growth. The addition of sucrose to the conditioned medium resulted in the maximum cell density being reached 4 days earlier compared to the control group and an increased substrate yield.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.428-435
• /
• 1994

Cell growth and production of ${\alpha}$-amylase, acetic acid and lactic acid were investigated in Bacillus amyloliquefaciens(ATCC 23350) flask culture with various carbon sources. Maximum dry cell density increased with increase in initial maltose concentration. Maximum dry cell density was the highest(1.4g/$\ell$) at 10g/$\ell$ of initial glucose concentration. With 10g/$\ell$ of initial glucose concentration, maximum specific cell growth rate was obtained. Among the various carbon sources maximum ${\alpha}$-amylase production was obtained with 149 unit/ml at 20g/$\ell$ of initial maltose concentration. With 5g/$\ell$ of initial maltose concentration, maximum ${\alpha}$-amylase production rate was obtained. By increasing carbon source concentration, acetic acid formation decreased. Acetic acid formation was higher in glucose than in maltose. By increasing carbon source concentration, lactic acid formation increased. Lactic acid formation was higher in maltose than in glucose.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.303-310
• /
• 1996

The marine microalga Isochrysis galbana Parke was studied to optimize its growth conditions in flask culture. Important medium components studied include nitrogen source, buffer, trace elements and vitamins. Environmental conditions include pH, temperature, light intensity, mixing extent and working volume. The medium prepared from natural sea-waters gave a higher final cell density than the medium prepared from synthetic sea-water Nitrate was a better source than ammonium. In the range of 0.4∼2mM, the final cell density was proportional to the initial nitrate concentration and the cell yield was estimated to be 8.5g dry cell wt/g N. For phosphate, optimal growth was observed in 0.1∼1.0mM but a considerable variation in pH was resulted. The addition of Tris at 5mM or 7mM could stabilize the medium pH, but this significantly reduced both growth rate and final cell density, The effect of trace elements and vitamins was negligible. Optimal temperature and initial pH were $20^{\circ}C$ and 8. When the intensity of incident light was varied in the range of 400∼2100 lux, the growth rate increased from 10mL to 70mL, the final cell density decreased although the initial growth rate did not change. Optimal agitation speed was 100rpm when working volume was 30mL. With optimal conditions, the maximum specific growth rate obtained was 0.021hr-1 and the final cell density was 1.1g/L.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.187-194
• /
• 1998

For mass production of polyhydroxyalkanoates (PHA), high cell density cultures of Alcaligenes eutrophus by fed-batch culture under phosphate-limitation condition has been investigated. PHA accumulation by the regulation by the regulation of initial phosphate concentration could be automatically induced, and high density cell culture above 200 g/L also could be successfully produced. The production of Poly-$\beta$-hydroxybutyrate (PHB) and dry cell weight increased with increasing the initial phosphate concentration. When the initial concentrations of phosphate were in the ranges of 1.5~4.5 g-PO$_4$/L, PHB and dry cell weight obtained were 83~266 g/L and 61~216 g/L, respectively, and PHB productivity was in the ranges of 1.35~3.10 g/L.h. When a mixture of glucose and propionic acid is used as carbon sources, poly(3-hydroxybutyrate-co-poly-3-hydroxyvalerate), P(3HB-co-3HV), could be also successfully produced under phosphate limitation condition. When the mole ratio of propionic acid to glucose in the feeding solution is 0.22, a final dry cell weight of 150 g/L and a P(3-HB-co-3HV) of 90 g/L were produced. Morphological changes and size distribution of PHB granules synthesized in A. eutrophus under phosphate-limitation condition are determined by TEM during the course of fed-batch. Mean granule diameters of PHB produced are in the range of 0.36~0.39 $\mu$m, and mean cell size was elongated from 0.54~0.59 $\mu$m$\times$ 1.3~1.5 $\mu$m to 0.83~0.89 $\mu$m $\times$2.0~2.3 $\mu$m. Phosphate concentration in media did not affect size distribution of PHB granule and cell.

• ALGAE
• /
• v.28 no.2
• /
• pp.193-202
• /
• 2013

Nitrogen availability and cell density each affects growth and cellular astaxanthin content of Haematococcus pluvialis, but possible combined effects of these two factors on the content and productivity of astaxanthin, especially under outdoor culture conditions, is less understood. In this study, the effects of the initial biomass densities IBDs of 0.1, 0.5, 0.8, 1.5, 2.7, 3.5, and 5.0 g $L^{-1}$ DW and initial nitrogen concentrations of 0, 4.4, 8.8, and 17.6 mM nitrate on growth and cellular astaxanthin content of H. pluvialis Flotow K-0084 were investigated in outdoor glass column photobioreactors in a batch culture mode. A low IBD of 0.1 g $L^{-1}$ DW led to photo-bleaching of the culture within 1-2 days. When the IBD was 0.5 g $L^{-1}$ and above, the rate at which the increase in biomass density and the astaxanthin content on a per cell basis was higher at lower IBD. When the IBD was optimal (i.e., 0.8 g $L^{-1}$), the maximum astaxanthin content of 3.8% of DW was obtained in the absence of nitrogen, whereas the maximum astaxanthin productivity of 16.0 mg $L^{-1}\;d^{-1}$ was obtained in the same IBD culture containing 4.4 mM nitrogen. The strategies for achieving maximum Haematococcus biomass productivity and for maximum cellular astaxanthin content are discussed.