• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1544-1545
• /
• 2011

For quantitative understanding of gas discharge phenomena, we should know electron collision cross section. Processing plasma etching of semiconductor, and research are being used in the etching source $C_4F_6$ gas may be used by itself and mixed with other gases are also used. However, the molecular gas $C_4F_6$ study on the characteristics of the electron transport and the cross-sectional area of the decision is still lacking. Therefore, we understand the electron transport characteristics and analysed the electron transport coefficients. And to understand and interpret physical properties of the ionization coefficient ${\alpha}$/N, and the attachment coefficient ${\eta}$/N in $C_4F_6$ gas.

• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.27-34
• /
• 2001

This paper discussed the shape effect of ceramic support carrier in order to facilitate biomass immobilization. The shape of ceramic support carrier was modified hollow pipe type into hollow gear type. After seeding, microorganisms were attached in crevices where protection from shear forces or surfaces where easy to contact with support carrier surface. In case of hollow gear type carrier, initial attachment rate was faster than that of hollow pipe type and obtained thick biofilm. Synthetic wastewater(COD:75~880 mg/L, organic loading rate:0.36~4.22 kgCOD/㎥.d) was treated aerobic fixed bed biofilm reactor where 100% of the volume was filled with the ceramic carrier. COD removal efficiency of reactor filled with gear type support carrier was a little high withing 70 days, and then showed similar removal efficiency. It was found that highly loaded operation with up to 4.22 kgCOD/㎥.d was possible in both reactor. Total biomass amounts of pipe type was higher than gear type, however, attached biomass of gear type was higher than that of pipe type.

• Clinical and Experimental Pediatrics
• /
• v.48 no.7
• /
• pp.691-695
• /
• 2005

There is scientific evidence that administration of probiotics is effective in the treatment of acute infectious diarrhea in children and the prevention of antibiotic associated diarrhea and nosocomial/community acquired diarrhea. Probiotics prevent relapse of recurrent pouchitis and decrease the initial onset of pouchitis in ulcerative colitis. Probiotic organisms suppress growth of pathogens as well as their epithelial attachment and/or invasion either directly by secreting antimicrobial substances or by stimulating host expression of protective molecules. Additionally, probiotics enhance mucosal barrier function and can stimulate host production of immunosuppressive molecules that downregulate inflammatory responses or allergic immune response. Mechanisms of action explain therapeutic effects and randomized controlled trials are warranted before recommendations for therapeutic or preventive use can be given.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.156-164
• /
• 1998

This study was performed to select media for the development of biological activated carbon process. Using activated carbon made by Norit, Calgon, Samchully Co., removal efficiency of humic acid by the isothermal adsorption test and biodegradation of organic matters by microbes attached to BAC and observation and counting of microbes attached to BAC were examined. The removal efficiency of humic acid with dose of activated carbon was influenced by initial concentration. Compared with other activated carbon, Norit was found to be most effective in view of adsorption capacity, biodegradation of organic matter, and attachment characteristics of microorganism. In conclusion, Norit which has high adsorption capacity and good biodegradation of organic matter was recommended for selecting media in BAC process.

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.463-481
• /
• 2017

Bacteria have been considered as a major foulant that initiates the formation of biofilm on the polymeric membrane surface. Some polymeric membranes are naturally antibacterial and have low fouling properties, however, numerous efforts have been devoted to improve their antibacterial performance. These modifications are mostly carried out through blending the membrane with an antibacterial agent or introducing the antibacterial agent on the membrane surface by chemical grafting. Currently, a significant number of researches have reported nanocomposite membrane as a new approach to fabricate an excellent antibacterial membrane. The antibacterial nanoparticles are dispersed homogenously in membrane structure by blending method or coating onto the membrane surface. Aim of the modifications is to prevent the initial attachment of bacteria to membrane surface and kill bacteria when attached on the membrane surface. In this paper, several studies on antibacterial modified membranes, particularly for water treatment, will be reviewed comprehensively. Special attention will be given on polymeric membrane modifications by introducing antibacterial agents through different methods, such as blending, grafting, and coating.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.1
• /
• pp.88-93
• /
• 2004

In general, a fundamental structural design consideration for an automobile is the overall dynamic behavior in bending and torsion. Dynamic behavior of the automobile are mainly influenced by the structural stiffness of B.I.W.(body-in-white) and the physical property of trim components. In this paper, the modeling techniques for various trim components of middle-sized bus are presented, and the dynamic effects of the trim components on the vibration characteristics of the bus are investigated. The $1^{st}$ torsional frequency is decreased by attaching windshield and backlite to the B.I.W., but the $1^{st}$ vertical bending frequency and the $1^{st}$ lateral bending frequency are increased. The natural frequencies of the bus are decreased by attaching doors and windows. And also, the natural frequencies of the bus are large decreased by attaching seats, instrument panel etc. The study shows that the dynamic characteristics of the bus can be effectively predicted in the initial design stage.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2001.08a
• /
• pp.23-25
• /
• 2001

1. Leptin itself was not expressed in mouse uterine tissues. 2. Leptin receptors were not expressed in nonpregnant and little expressed in 3.5 day of pregnant uterine tissues. However, there was a signal in 4.5 and 5.5 day of tissues. 3. The expression level of leptin receptor variants in the implantation sites at around the time of initial embryo attachment (day 4.5 of pregnancy) and during the actual implantation period (day 5.5 of pregnancy) was much lower than that in the interimplantation 4. Finding of the differential expression of leptin receptors in implantation sites compared to interimplantation sites suggests that leptin - leptin receptor system may be one of the delicate regulators in the molecular mechanism of the implantation process.

• Journal of Plant Biology
• /
• v.31 no.2
• /
• pp.155-164
• /
• 1988

The rapid senescence of detached Chinese cabbage leaf discs in darkness is first manifested by a sharp rise in malondialdehyde content (indicated by distruption of membrane structure), then by a rise in peroxidase activity and a decrease in catalase activity, and ultimately by chlorophyll degradation. These changes in parameters besides the catalase activity during senescence were delayed by application of spermidine. Especially, 10-4M spermidine almost completely arrested chlorophyll degradation after incubaton over 5 days. Spermidine reduced the amount of ethylene produced by senescing leaf discs. Additionally, it also reduced IAA-induced ethylene production. Calcium ion (1mM, 10mM) supplied together with the spermidine diminished the spermidine action, indicating probable involvement of an initial ionic attachment mechanism. These results suggest that spermidine can be used as an anti-senescence agent for plants and that this agent may stabilize membrane structure through interaction with the negatively charged loci on the membrane and exert the influence during senescence.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.553-560
• /
• 1999

The aim of the present study was to evaluate the effect of the expanded polytetrafluoroethylene (e-PTFE) membrane exposure on the initial healing of the periodontal tissue in guided tissue regeneration (GTR) procedure. 90 sites selected from 90 patients were treated with gingival flap surgery supported by an e-PTFE membrane. The material included angular bony defects with probing attachment loss of > 5mm or degree II furcation involvement. Treated sites were classified with membrane exposure group and non-exposure group at membrane removal and evaluated healing type. The results were obtained as follows. 1. e-PTFE membrane was exposed at 61 sites (67.8%) among 90 sites. 2. Thirteen sites (14.4%) depicted rapid healing type, 65 sites (72.2%) depicted typical healing type, 9 sites (10%) showed delayed healing type and 3 sites (3.3%) were categorized as adversed healing type. 3. In e-PTFE membrane exposure group, 1 site (1.6%), 51 sites (83.6%), 6 sites (9.8%) and 3 sites (4.9%) showed rapid healing type, typical healing type, delayed healing type and adverse healing type respectively. 4. In e-PTFE membrane non-exposure group, 12 sites (41.3%), 14 sites (48.3%) and 3 sites (10.3%) showed rapid healing type, typical healing type and delayed healing type respectively. Adverse healing type was not observed. 5. The rate of favourable healing between e-PTFE membrane exposure group and non-exposure group was not statistically significant(p=0.56). These results suggest that the prevention of membrane exposure may be important to obtain rapid healing type. However favourable healing could be obtained with stringent infection control program even if membrane was exposed.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.5
• /
• pp.628-636
• /
• 2012

Raw-starch-digesting enzyme (RSDA) was immobilized on Amberlite beads by conjugation of glutaraldehyde/polyglutaraldehyde (PG)-activated beads or by crosslinking. The effect of immobilization on enzyme stability and catalytic efficiency was evaluated. Immobilization conditions greatly influenced the immobilization efficiency. Optimum pH values shifted from pH 5 to 6 for spontaneous crosslinking and sequential crosslinking, to pH 6-8 for RSDA covalently attached on polyglutaraldehyde-activated Amberlite beads, and to pH 7 for RSDA on glutaraldehyde-activated Amberlite. RSDA on glutaraldehyde-activated Amberlite beads had no loss of activity after 2 h storage at pH 9; enzyme on PG-activated beads lost 9%, whereas soluble enzyme lost 65% of its initial activity. Soluble enzyme lost 50% initial activity after 3 h incubation at $60^{\circ}C$, whereas glutaraldehyde-activated derivative lost only 7.7% initial activity. RSDA derivatives retained over 90% activity after 10 batch reuse at $40^{\circ}C$. The apparent $K_m$ of the enzyme reduced from 0.35 mg/ml to 0.32 mg/ml for RSDA on glutaraldehyde-activated RSDA but increased to 0.42 mg/ml for the PG-activated RSDA derivative. Covalent immobilization on glutaraldehyde Amberlite beads was most stable and promises to address the instability and contamination issues that impede the industrial use of RSDAs. Moreover, the cheap, porous, and non-toxic nature of Amberlite, ease of immobilization, and high yield make it more interesting for the immobilization of this enzyme.