• 한국전자통신학회논문지
• /
• 제6권6호
• /
• pp.815-822
• /
• 2011

본 논문은 다변화하고 있는 GMDSS 본연의 임무인 조난 및 긴급 안전과 병행하여 요구되고 있는 해상의 데이터통신 서비스를 위한 선박통신장비인 MF/HF, VHF, Inmarsat 위성통신 등 기존 탑재 장비들의 기능적 한계와 서비스 가능성을 확인하기 위한 데이터 통신 시스템을 설계 및 구현하였으며, 통신 매체별 통신비용, 처리율, 통신 속도, 처리 가능한 서비스, 통신 가능 범위 등에 대한 성능 분석 및 평가를 실시하여 미래 해상 통신 환경에서의 GMDSS의 역할과 방향을 제시하였다.

• KIEAE Journal
• /
• 제8권4호
• /
• pp.29-36
• /
• 2008

The rapid industrialization since the 1960s has caused considerable changes in the appearance of Korean cities. The huge demand and cityward tendency derived from the increase of population with such the expansion from 9 millions in 1960 to 43 millions in 2003, have resulted in number of problems such as the falling-off in the quality of life, amenity, and safety. And above all, the urban identities is not to be found obviously in the cities. With regard to these problems, the re-creation of cities should be emphasized to make environmental, economical, and social improvements and to restore human-oriented activities. In the course of making new improvements cities need to preserve the characteristics and maintain the concordance with their environments. In other words, the restoration of cities ought to be made in the aspect of continuity, which means the accession of genetic factors inherent in cities. In this background, concerning about the system on apartment house especially relating to environmentally sound restoration and comparing with that of Japan, this study proposes the direction needed in the development of urban space.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.949-959
• /
• 2006

Despite of the popularity of using empirical methods for support design, empirical rules suffer from the inherent problem of providing no indication of the safety degree of the design. For the support design of large span tunnel, it was considered that the empirical design guidelines should be augmented by more explicit design methods. This paper presents an overview of the analytical support design methodology that is used to refine initial empirical recommendations. The initial support design supplemented by analytical methods is validated by probabilistic and deterministic approach applied to stress-induced and structurally controlled gravity-driven instability problem each. As a result, the extent of the potential failure zone is sorted out and numerical parametric studies were performed to gain insight into the overall behavior of tunnel in the potential failure zone. Concequently, it was decided that additional conservation techniques have to be planed as a reserved support pattern.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권9호
• /
• pp.485-490
• /
• 2006

According to the computerization of railway signaling systems, the interface link between the signaling systems has been replaced by the digital communication channel. At the same time, the importance of the communication link is more pronounced than before. In this paper, new Network-based protocol between railway signaling and SCADA (Supervisory Control and Data Acquisition system) has designed and the overview of designed protocol is briefly represented. And also this paper addresses analysis of newly designed train control systems. Fame error rates of the data transmissions are calculated and compared for the two cases that the CTC (Centralized Traffic Control)/SCADA has an extra data transmission error control (CRC16) besides the inherent error control of the Ethernet and that the CTC/SCADA has no extra data transmission error control. With simulation results it has been verified that the additional error control code contributes to lowering the frame error rate. It will be expected to increase the safety, reliability and efficiency of maintenance of the signaling systems by using the designed protocol for railway signaling system.

• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.924-929
• /
• 2003

A majority of infrastructures has been deteriorated over time. Therefore, it is very important to verify the quality of construction, and the level of structural deterioration in existing structures, to ensure their safety and functionality. Many researchers have studied non-destructive testing (NDT) methods to identify structural problems in existing structures. The impact echo technique is one of the widely used NDT techniques. The impact echo technique has several inherent problems, including the difficulties in P-wave velocity evaluation due to inhomogeneous concrete properties, deterioration of evaluation accuracy where multiple reflection boundaries exist, and the influence of the receiver location in evaluating the thickness of the tested structures. Therefore, the objective of this paper is to propose an enhanced impact echo technique that can reduce the aforementioned problems and develop a Virtual Instrument for the application via a thickness evaluation technique which has same technical background to find deterioration in concrete structures. In the proposed impact echo technique, transfer function from dual channel system analysis is used, and coherence is improved to achieve reliable data. Also an averaged signal -ensemble- is used to achieve more reliable results. From the analysis of transfer function, the thickness is effectively identified.

• Clinical and Experimental Pediatrics
• /
• 제60권8호
• /
• pp.237-244
• /
• 2017

During the last 10 years, there have been major technological achievements in pediatric interventional cardiology. In addition, there have been several advances in cardiac imaging, especially in 3-dimensional imaging of echocardiography, computed tomography, magnetic resonance imaging, and cineangiography. Therefore, more types of congenital heart diseases can be treated in the cardiac catheter laboratory today than ever before. Furthermore, lesions previously considered resistant to interventional therapies can now be managed with high success rates. The hybrid approach has enabled the overcoming of limitations inherent to percutaneous access, expanding the application of endovascular therapies as adjunct to surgical interventions to improve patient outcomes and minimize invasiveness. Percutaneous pulmonary valve implantation has become a successful alternative therapy. However, most of the current recommendations about pediatric cardiac interventions (including class I recommendations) refer to off-label use of devices, because it is difficult to study the safety and efficacy of catheterization and transcatheter therapy in pediatric cardiac patients. This difficulty arises from the challenge of identifying a control population and the relatively small number of pediatric patients with congenital heart disease. Nevertheless, the pediatric interventional cardiology community has continued to develop less invasive solutions for congenital heart defects to minimize the need for open heart surgery and optimize overall outcomes. In this review, various interventional procedures in patients with congenital heart disease are explored.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.199-205
• /
• 2006

The composite frame system with reinforced concrete column and steel beam can be improved in its structural efficiency by complementing the shortcomings of the two systems. The system, however, has many inherent problems in practical design and construction process due to the dissimilarities of the materials. Considering these circumstance, this research aims for the development of a composite structural system which connects the steel beams to the R/C columns with higher structural safety and economy. Basically, the proposed connection system is composed of four split tees, structural angles reinforced by a stiffener, high strength steel rods, connecting plates and shear plates. Structural tests have been carried out to investigate the moment transfer mechanism 1Tom the beam flange to steel rods or connecting plates through the structural angle reinforced by a stiffener. The four prototype specimens have been tested until the flange of the beam reached a plastic state. The test results indicated that no distinct material dissimilarities between concrete and steel have been detected for the proposed hybrid beam-column connection system and that the stress transfer through the structural angle between the beam flange and steel rods or connecting plates was very encouraging.

• 전자공학회논문지
• /
• 제49권10호
• /
• pp.23-33
• /
• 2012

본 논문은 위성항법시스템을 이용한 정밀 단독측위에 관한 연구이다. 위성항법시스템이 가지고 있는 내재적인 문제점인 장애물 등 여러 가지 환경 요인으로 인해 신호를 수신할 수 없는 경우 음영지역과 위치오차 증가 등에 관한 연구논문이다. 논문에서는 다양한 수신기의 성능 분석과 대도로 중앙, 대도로 측면, 주택가, 고층 건물 주변의 골목길 등 다양한 환경에 따른 위성수와 DOP(Dilution of Precision)변화 그리고 위치오차의 변화 등을 분석하였다. 그리고 환경 변화에 따른 위치오차 발생 범위와 오차 원인을 파악하여, 위성항법시스템의 신뢰성과 안정성을 높이는데 그 목적이 있다.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1691-1699
• /
• 2014

IEEE에서는 V2I, V2V 등의 무선 통신 기능을 제공하여 차량 운행의 안전을 증대 시킬 수 있는 WAVE 규격을 정의하고 있다. WAVE 규격에서는 무선 통신이 갖는 보안 취약성을 극복할 수 있도록 메시지의 암호화 및 인증 기능을 지원하고 있다. 본 논문에서는 WAVE 규격에서 지원하고 있는 보안 알고리즘들을 openssl 라이브러리와 C언어로 구현하였으며, 구현된 알고리즘들은 관련 규격들에서 제시하고 있는 테스트 벡터를 이용하여 정상 동작을 확인하고 성능을 측정하였다. 본 논문에서 구현된 보안 알고리즘들은 플랫폼에 독립적으로 구현되어, WAVE 보안 규격의 구현에 활용될 수 있을 것으로 생각된다.

• 소성∙가공
• /
• 제18권3호
• /
• pp.236-244
• /
• 2009

In response to growing environmental and collision-safety concerns, the automotive industry has gradually used high-strength and ultla-high-strength steels to reduce the weight of automobiles. In order to overcome inherent process disadvantages of these materials such as poor formability and high springback at room temperature, hot forming has recently been developed and adopted to produce some important structural parts in automobiles. This method enables manufacturing of components with complex geometric shapes with minimal springback. In addition, a quenching process may enhance the material strength by more than two times. This paper investigates mechanical and forming characteristics of high-strength boron-alloyed steel with hot forming, in terms of hardness, microstructure, residual stress, and springback. In order to compare with experimental results, a finite element analysis of hot forming process coupled with phase transformation and heat transfer was carried out using DEFORM-3D V6.1 and also, to predict high temperature mechanical properties and flow curves for different phases, a material properties modeler, JMatPro was used.