• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.117-126
• /
• 1991

Silicon single crystal is the most frequently used materials for the semiconductor device fabrication, The crystal growth techniques have been steadily improving for achieving a greater degree of crystal perfection and large ingot size. This report present the advantages, disadvantages and technical problems of the various crystal pulling technique briefly on the economic impact of productivity. Also, future directions of the pulling technique and process including the economical and quantitative aspects are deal with.

• Transactions of Materials Processing
• /
• v.4 no.2
• /
• pp.141-150
• /
• 1995

The purpose of the open die press forging is to maximize the internal deformation for better structural homogeneity and center-line consolidation in case of the ingot. A two and three dimensional viscoplastic finite element analysis is carried out for the plate, cylinder and square forging with the flat die in order to study the forging effects during the process. Effect of width, height reduction, and die staggering are studied through simulation of the process. Thus favorable working conditions are suggested for better and more disirable product quality.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.39-42
• /
• 2003

Steam Generator has been manufactured by welding process after partial manufacturing of various steel forgings such as shell, head and tube sheet. Usually, these steel forgings are made by open die forging process. After steel melting and ingot making, open die forging has been carried out to get a good quality which means high soundness and homogeniety of the steel forgings by using high capacity hydraulic press. This paper introduced open die forging development status of the large steel forgings which is used for the steam generator of 1,400MW next generation nuclear power plant.

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.507-510
• /
• 2008

Effect of V addition on the precipitation behavior and strength of Fe-36Ni based high strength Invar alloy for power transmission wire was investigated. Fe-36Ni Invar alloy plates were fabricated using conventional ingot casting followed by hot rolling. High strength can be obtained through precipitation hardening and strain hardening by cold rolling. Simulation using FactSage$^{(R)}$ revealed that equilibrium phases which can be formed are two kinds of MC-type precipitates, $Mo_{2}C$ and $M_{23}C_6$ carbide. The latter stoichiometric carbide was expected to be formed at relatively lower temperature of $800^{\circ}C$.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.627-632
• /
• 2001

Nimonic 80A superalloy with high-temperature strength and high corrosion-resistance is used in jet engine for aircraft, gas turbine for power plant and marine diesel engine, etc. To develop the manufacturing process of exhaust valve for large diesel engine using Nimonic 80A, various mechanical tests, such as hot compression, microstructure and hardness test have been performed. This results effectively used to set the reasonable forging conditions while hot forging of Nimonic 80A superalloy. Open die and closed die forging experiments are carried out from ESR ingot and finally get a good shaped exhaust valve product.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.567-574
• /
• 1991

In this study thermal stress generated in three ingot moulds(GC25) during the solidification process of aluminum were analyzed by the two-dimensional thermo-elasto-plastic theory. In temperature analysis, all of the three models are shown steep temperature rising each case in initial stage of cooling. In thermal stress analysis, all of three models took compressible stress on inside wall of the mould, and tensible along with on out side. Model 2 take place less compressible, tensible stress then model 1. But model 3. have similar as thermal stress as model 2. The analysis will made one possible to calculate an optimum mould shape whose thermal stress gradient becomes minimum.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.1 no.2
• /
• pp.113-124
• /
• 1977

By spplying the ultrasomic wave to the solidifing liquid metal, grain sizes of the ingot are refined and the structures are homogenized. One of the reason is the enhancement of nucleation by ultrasonic vibration. According to the reports on this subject, the uncleating conditions are formed by the increse of melting point which is produced by the high pressure due to caviation. In this paper we study whether the caviations are the orgin of the nucleation and analized whether the nucleating conditions are formed by the increase of melting point or not and also compared the analytical result with the experim nt. We analized the pressure change induced by cllaphsing of cavity and the motion of cavith in oscillating pressure field. And we further analized the variation of melting point with pressure change.

• Transactions of Materials Processing
• /
• v.7 no.1
• /
• pp.59-65
• /
• 1998

In this study an attempt was made to simulate the coextrusion process of the cladded finned tube manufacturing by extrusion of plasticine. The effects of the billet and the plate inserted between the ingot and extrusion die on the variation of clad thickness of the extruded tube were studied. The results showed that cladded tube with uniform thickness can be obtained by a proper combination of clad thickness of billet and the plate. The relative strength of the billet and clad materials did not affect significantly on the variation of the clad thickness of the extruded tubes.

• Journal of the Korean Vacuum Society
• /
• v.2 no.3
• /
• pp.299-303
• /
• 1993

Erbium metal을 불순물로서 2mol% 첨가한 TlGaS2:Er3+ 단결정을 수평전기로에서 합성한 ingot를 사용하여 수직 Bridgman 방법으로 성장시켰다. 성장된 결정은 층상으로 이루어진 monoclinic 구조였으며, 10K에서 간접전이형 및 직접전이형 energy band gap은 각각 2.55eV, 2.57eV이었고, Er3+ 이온에 의한 두 개의 불순물 광흡수 peak가 524.9nm와 656.4nm에서 관측되었다. Themally stimulated current(TSC)를 측정하여 0.21eV와 0.38eV의 donor 준위와 0.71eV의 accptor 준위를 구하였다. 10K에서 측정된 photoluminescence(PL) spectrum에서는 632nm와 759nm에서 D-A pair에 의한 broad한 peak와 552, 559, 666, 813, 816, 827nm에서 Er3+ 이온에 의한 sharp한 peak들이 나타났다.

• Journal of the Korean Vacuum Society
• /
• v.2 no.3
• /
• pp.294-298
• /
• 1993

CuGaSe2 단결정을 고순도(99.9999%)의 Cu, Se 원소를 화학조성비로 칭량한 후 Se을 3mole% 과잉으로 첨가하여 합성된 ingot를 사용하여 iodine(99.9999%)을 수송매체로 한 화학수송법으로 성장시켰다. 성장된 단결정은 검정색을 띠고 있었으며, 10K에서 optical energy gap이 1.755eV로 주어졌다. Ar-ion laser로 여기시켜 측정한 photoluminescence(PL) 스펙트럼으로부터 1.667eV, 1.085eV, 1.025eV에 위치한 세 개의 PL peak를 얻었다. Thermally stimulated current(TSC) 측정에서 0.660eV, 0.720eV의 deep donor level을 관측하였으며, PL peak intensity의 thermal quenching으로 구한 activation energy는 0.010eV이었다. CuGaSe2 단결정에서 PL mechanism은 edge emission 및 donor-acceptor pair recombination임을 규명했다.