• 전기학회논문지
• /
• 제62권12호
• /
• pp.1725-1729
• /
• 2013

In this paper, the modeling and simulation of infrared absorption in an infrared absorbing structure with the cascaded transmission line model were carried out. Each layer in the infrared absorbing structure can be modeled as a characteristic impedance of the cascaded transmission line model. The simulation results show that the cavity thickness to get a maximum absorption should be less than a quarter wavelength, which is somewhat different from prevalent thickness. It can be assured that the sheet resistance of an absorbing layer to get a maximum absorption is $377{\Omega}/{\square}$, that the thickness of the absorbing layer dose not affect the spectral characteristics of absorption. It is also shown that the thickness of the active layer is not critical to the IR absorption. It can also be assured that the validation of this modeling is proved in comparison with the previous results from similar absorbing structures.

• 전자공학회논문지CI
• /
• 제46권4호
• /
• pp.102-110
• /
• 2009

본 논문은 적외선영상(infrared image)에서 배경모델링 기반의 실시간 객체 탐지 기법과 고속 PPC(PowerPC) & FPGA(Field Programmable Gate Array) 기반 개방형 구조의 하드웨어 설계 방법을 제안한다. 개방형 구조는 하드웨어 및 소프트웨어의 이식이 용이하고, 확장, 호환성, 관리 및 유지보수 등이 편리한 장점이 있다. 제안된 배경모델링 방법을 개방형 구조에 탑재하기 위하여 입력영상에서 검색영역 템플릿을 성긴 블록으로 구성하여 탐색영역의 크기를 줄인다. 또한, 이전 프레임과 현재 프레임에서 영상의 흔들림이 발생했을 때 보정하기 위해 전역움직임 보상방법을 적용한다. 배경과 객체를 분리는 픽셀 밝기의 시간 분석을 통해 적응적 값을 적용한다. 분리된 객체주변에 발생하는 클러터 제거 방법은 중앙값 필터를 적용한다. 설계된 임베디드 시스템에서 배경모델링, 객체탐지, 중앙값 필터, 라벨링, 합병 등의 방법은 PPC에서 구현하였다. 실험결과 제안된 임베디드 시스템에서 전역 움직임 보정과 배경예측을 통해 실시간으로 객체가 탐지될 수 있음을 보였다.

• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.411-416
• /
• 2017

적외선 표적의 정밀한 모델링을 위해서는 정확한 표면온도 계산이 필요하다. 본 논문에서는 전도, 대류, 복사를 고려한 복합 열해석 모듈을 소프트웨어로 구현하고, 이를 통하여 표적 재질 및 자세, 환경 요건에 따른 표적의 표면온도 해석을 수행 하였다. 구현된 결과는 상용 소프트웨어인 OKTAL-SE 와의 비교를 통하여 결과의 신뢰성을 검증하였다. 그 결과 자체 검증이 완료된 상용 소프트웨어인 OKTAL-SE 와 약 1% 이내의 오차를 보였다. 계산된 온도 결과를 바탕으로 적외선 표적 모델링을 수행하였으며 OKTAL-SE와의 연동을 통해 적외선 신호 해석을 수행하였다.

• Near Infrared Analysis
• /
• 제1권2호
• /
• pp.29-33
• /
• 2000

The identification step of raw drug materials is an indispensible procedure in the GMP manufacturing process within the pharmaceutical industry. However, wet chemistry methods for identification of drug materials, used by the various Pharmacopeia are time-consuming and expensive steps. In this paper, near-infrared spectroscopy (NIRS) has been developed for identifying eleven drug substances including calcium pantothenate, cefaclor, cefoperazone, cephradine, dextromethorphan, ehtambutol, nicotinamide, pyrozinamide, tramadol, vitamin C, and vitamin E. Also the aim of ths work is to consturct a new algorithm for calibration model using soft independence modeling of class analogy (SIMCA) with Malinowskis Indicator Function (IND), which is used for finding the number of principal components of each class of the SIMACA model. The use of NIR technique with pattern recognition to qualify raw materials can make it possible to monitor process in real time as well as to control all procedures in the pharmaceutical industry. As the result, the samples identified of 183 different batches from 11 different compounds were separated clearly by SIMCA with 2nd derivative spectra in the NIR region of 1100∼2400 nm.

• 한국통신학회논문지
• /
• 제24권8B호
• /
• pp.1593-1600
• /
• 1999

본 논문은 적외선 유도 무기의 표적 추적 시뮬레이션을 위한 공중 표적 추적 모델링에 대한 연구이다. 표적의 적외선 특성, 대기 투과 특성, 및 검출기 특성에 대한 모델링이 핵심 기술을 이루는 이 모델링은 시선, 거리, 및 대기 상태에 따른 다양한 추적 조건에서 공중 표적을 포착하는 과정을 보여준다. 계산된 결과를 측정값과 비교하거나 제안된 모델링을 적외선 표적 추적에 관련된 여러 시뮬레이션들에 적용하여 그 효용성을 확인하였다. 또한, 제안된 모델링은 유사 표적으로부터 표적만을 효과적으로 찾아내기 위한 최적 검출기 및 검출 대역 설정을 위한 이정표로 활용될 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.101-109
• /
• 2019

This paper examines the classification of five coniferous species, including larch (Larix kaempferi), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), cedar (Cryptomeria japonica), and cypress (Chamaecyparis obtusa), using near-infrared (NIR) spectra. Fifty lumber samples were collected for each species. After air-drying the lumber, the NIR spectra (wavelength = 780-2500 nm) were acquired on the wide face of the lumber samples. Soft independent modeling of class analogy (SIMCA) was performed to classify the five species using their NIR spectra. Three types of spectra (raw, standard normal variated, and Savitzky-Golay $2^{nd}$ derivative) were used to compare the classification reliability of the SIMCA models. The SIMCA model based on Savitzky-Golay $2^{nd}$ derivatives preprocessing was determined as the best classification model in this study. The accuracy, minimum precision, and minimum recall of the best model (PCA models using Savitzky-Golay $2^{nd}$ derivative preprocessed spectra) were evaluated as 73.00%, 98.54% (Korean pine), and 67.50% (Korean pine), respectively.

• 비파괴검사학회지
• /
• 제34권2호
• /
• pp.128-134
• /
• 2014

Infrared thermography is an emerging approach to non-contact, non-intrusive, and non-destructive inspection of various solid materials such as metals, composites, and semiconductors for industrial and research interests. In this study, data processing was applied to infrared thermography measurements to detect defects in metals that were widely used in industrial fields. When analyzing experimental data from infrared thermographic testing, raw images were often not appropriate. Thus, various data analysis methods were used at the pre-processing and processing levels in data processing programs for quantitative analysis of defect detection and characterization; these increased the infrared non-destructive testing capabilities since subtle defects signature became apparent. A 3D finite element simulation was performed to verify and analyze the data obtained from both the experiment and the image processing techniques.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.4106-4106
• /
• 2001

A method to discriminate human gallstones by nea. infrared(NIR) spectrometry using a soft independent modeling of class analogy (SIMCA) has been studied. The fifty NIR spectra of gallstones in the wavenumber range from 4500 to 10,000 cm$\^$-1/ were measured. The forty samples were classified to three classes, cholesterol stone, calcium bilirubinate stone and calcium carbonate stone according to the contents of major components in each gallstone. The training set which contained objects of the different known class was constructed using forty NIR spectra and the test set was made with ten different gallstone spectra. The number of important principal components(PCs) to describe the class was determined by cross validation in order to improve the decision criterion of the SIMCA for the training set. The score plots of the class training set whose objects belong to the other classes were inspected. The critical distance of each class was computed using both the Euclidean distance and the Mahalanobis distance at a proper level of significance(${\alpha}$). Two methods were compared with respect to classification and their robustness towards the number of PCs selected to describe different classes.

• 한국컴퓨터정보학회논문지
• /
• 제9권1호
• /
• pp.63-70
• /
• 2004

본 논문에서는 자체적으로 개발된 항공기의 적외선 열상표적 시스템의 모델링, 설계, 성능시험 결과 등에 대하여 기술한다. 개발된 시스템은 적외선 형상과 강도를 제어할 수 있도록 설계되어서 적외선 형상과 방사되는 강도가 실물 항공기와 유사하다. 본 논문에서 제시한 기술을 적용한 결과 완전가동 상태에서 실물항공기의 적외선열상 이미지와 같은 열상을 만드는데 오직 30㎾정도의 전력만을 소비됨을 확인하였다 성능실행시험 후에는 표적적응유도시험. 유도조종 로직시험 등과 같은 성능평가시험 단계를 통하여 본 논문에서 개발된 적외선 열상표적을 휴대용 대공유도무기의 표적으로 실용화하였다.

• 한국BIM학회 논문집
• /
• 제7권2호
• /
• pp.36-43
• /
• 2017

Population growth and rapid urbanization has been converting large amounts of rural vegetation into urbanized areas. This human induced change has increased temperature in urban areas in comparison to adjacent rural regions. Various studies regarding to urban heat island have been conducted in different disciplines in order to analyze the environmental issue. Especially, different types of thermal infrared remote sensing data are applied to urban heat island research. This article reviews research focusing on thermal infrared remote sensing for urban heat island and urban planning studies. Seven studies of analyses for the relationships between urban heat island and other dependent indicators in urban planning discipline are reviewed. Despite of different types of thermal infrared remote sensing data, units of analysis, land use and land cover, and other dependent variable, each study results in meaningful outputs which can be implemented in urban planning strategies. As the application of thermal infrared remote sensing data is critical to measure urban heat island, it is important to understand its advantages and disadvantages for better analyses of urban heat island based on this review. Despite of its limitations - spatial resolution, overpass time, and revisiting cycle, it is meaningful to conduct future research on urban heat island with thermal infrared remote sensing data as well as its application to urban planning disciplines. Based on the results from this review, future research with remotely sensed data of urban heat island and urban planning could be modified and better results and mitigation strategies could be developed.