• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.194-196
• /
• 2002

While ultraviolet radiation alters various cutaneous cell functions, little is known about photo-immunological and photobiological effects of infrared radiation (IR) on the skin except its local thermal effects. The fIrst part of this study demonstrated that single exposure of mouse skin to near IR (0.7 - 1.3 $\mu$m) reversibly suppressed the proliferating activity of the epidermis, the density of Langerhans cells, and the ability of skin to induce contact hypersensitivity reaction. The second part demonstrated that the rate of wound closure was significantly accelerated by repeated exposures in animal models. The production of transforming growth factor-$\beta$l and matrix metalloproteinase-2, which are responsible for the wound healing processes, was significantly upregulated by irradiation, as shown by enzyme immunoassay, zymography, and reverse transcription polymerase chain reaction. Thermal controls were negative. The results suggest that near-IR irradiation can modulate the epidermal proliferation and part of the skin immune system, and stimulate the wound healing processes, presumably by non-thermal effects.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.168-172
• /
• 2017

A nondispersive infrared (NDIR) ethanol gas sensor was prototyped with ASIC implemented thermopile sensor, which included a temperature sensor and two ellipsoidal waveguide structures. The temperature dependency of the two ethanol sensors (with partially blocked and intact structures) has been characterized. The two ethanol gas sensors showed linear output voltages initially when varying the ambient temperature from 253 K to 333 K. The slope of the temperature sensor presented a constant value of 15 mV/K. After temperature compensation, the ethanol gas sensor estimated ethanol concentrations with larger errors of 20 to 25% below 200 ppm. However, the estimation errors were reduced to between -10 and +1 % from 253 K to 333 K above 200 ppm ethanol gas concentration in this research.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2019

Optical stimulation provides a promising alternative to electrical stimulation to selectively modulate tissue. However, developing noninvasive techniques to directly stimulate excitable tissue without introducing genetic modifications and minimizing cellular stress remains an ongoing challenge. Infrared (IR) light has been used to achieve optical pacing for electrophysiological studies in embryonic quail and mammalian hearts. Here, we demonstrate optical stimulation and pacing of the embryonic chicken heart using a pulsed infrared thulium laser with a wavelength of 1927 nm. By recording stereomicroscope outputs and quantifying heart rates and movements through video processing, we found that heart rate increases instantly following irradiation with a large spot size and high radiant exposure. Targeting the atrium using a smaller spot size and lower radiant exposure achieved pacing, as the heart rate synchronized with the laser to 2 Hz. This study demonstrates the viability of using the 1927 nm thulium laser for cardiac stimulation and optical pacing, expanding the optical parameters and IR lasers that can be used to modulate cardiac dynamics.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.770-775
• /
• 2018

In this study, the characteristics of muscle relaxation were analyzed by the experimental and numerical method. A skin tissue was produced by imitational biological tissue using the agar powder, saline solution and sugar. The tissue was exposed to three types of wavelength-blue visible radiation(410 nm), red visible radiation(635 nm), and infrared ray(830 nm). The temperature results along the depth of tissue were measured according to the variation of light wavelength and irradiation time. The temperature change of the tissue shown up similar pattern regardless of the light wavelength kinds. The wavelength of infrared ray penetrated strongly into tissue between 3.2 mm and 11.4 mm. Also, the temperature change with the irradiation time was small, and the temperature value of the infrared ray was the largest. As a result, the muscle relaxation will occur mainly at the infrared wavelength.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.6
• /
• pp.577-585
• /
• 2010

This paper is a part of developing a software that predicts the infrared signal emitted from a ground object by considering solar irradiation. The radiance emitted from a surface can be calculated by using the temperature and optical characteristics of the surface object. The bidirectional reflectance distribution function (BRDF) is defined as the ratio of reflected radiance to incident irradiance. It is a very important surface reflection property that decides the reflected radiance from the object. In this paper, the spectral radiance received by a remote sensor over the mid-wave infrared(MWIR), and the long-wave infrared(LWIR) regions are computed and compared each other for several different materials. The results show that the optical surface properties such as the BRDF and the emissivity of the object surface can play a major role in generating the infrared signatures of various objects, and the largest infrared signal may reach up to 10 times the smallest one when the infrared signals obtained from a flat plate with different surface conditions under the sun light.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06a
• /
• pp.144-148
• /
• 1996

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.819-826
• /
• 2014

This study was carried out to investigate the effects of night-time far-infrared irradiance quality of red pepper dried in greenhouses. This study involved 4 treatments: sunlight alone (control), or sunlight plus nightly far-infrared irradiation at $250W{\cdot}6.6m^{-2}$ ($250W{\cdot}6.6m^{-2}$), far-infrared irradiation at $250W{\cdot}3.3m^{-2}$ ($250W{\cdot}3.3m^{-2}$), or far-infrared irradiation $500W{\cdot}3.3m^{-2}$ ($500W{\cdot}3.3m^{-2}$). The drying periods were 12 days in $500W{\cdot}3.3m^{-2}$ and $250W{\cdot}3.3m^{-2}$, and 14 days in $250W{\cdot}6.6m^{-2}$, and 15 days in the control. The daytime temperature was same among the treatments. The lowest temperature was at $23.8^{\circ}C$ in control, and $29.5-37.2^{\circ}C$ in far-infrared irradiation treatments. The marketable yield was 7-14% higher in far-infrared irradiation treatments compared to the control. The rate of marketability was higher in far-infrared irradiation treatments (93.6-96.3%) than in the control (87.0-87.5%). The American Spice Trade Association (ASTA) value was greatest in the $250W{\cdot}3.3m^{-2}$ treatment, followed by $250W{\cdot}6.6m^{-2}$, then $500W{\cdot}3.3m^{-2}$, and finally the control. Capsaicinoid content showed no regular trend among the treatments. Our results provide an optimized method for reducing drying time of red pepper under sunlight, and improving the quality of dried red pepper.

• Applied Biological Chemistry
• /
• v.49 no.1
• /
• pp.60-64
• /
• 2006

The effect of far-infrared (FIR) irradiation and heat treatment on the antioxidant activity of extracts from citrus pomaces (CP) was evaluated. CP were placed in pyrex petri dishes (8.0 cm diameter) and irradiated at $100^{\circ}C$ and $150^{\circ}C$ for 5, 10, 15, 20, 40 or 60 min with a FIR heater or simple heater, respectively. After FIR irradiation or simple heat treatment, 70% ethanol extracts (EE) and water extracts (WE) of CP were prepared and radical scavenging activity (RSA) and reducing power of the extracts were determined. The antioxidant activities of the extracts increased as the time of heating or FIR-irradiation increased. When CP were FIR-irradiated at $100^{\circ}C$ far 30min, the values of RSA and reducing power of EE increased from 14.9% to 44.2%, and 0.290 to 0.886, respectively, compared to the untreated control. Simple heat treatment of CP at $100^{\circ}C$ for 60 min also increased RSA and reducing power of EE to 44.7%, and 1.045, respectively. FIR irradiation and heat treatment increased RSA and reducing power of WE from CP, too. These results indicated the antioxidant activity of CP extracts was significantly affected by FIR irradiation and heating temperature and duration on CP, and that the FIR irradiation and heat treatment process can be used as a tool for increasing the antioxidant activity of CP.

• Carbon letters
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2015

Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile strength of 0.54 GPa for a similar fiber diameter. Elemental, Fourier-transform infrared spectroscopy, and thermogravimetric analyses indicate that E-beam irradiation is an efficient oxidation and dehydrogenation treatment for pitch fibers by showing that the intensity of the aliphatic C-H stretching and aromatic $CH_2$ bending (out-of-plane) bands significantly decrease and carbonyl and carboxylic groups form.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.2
• /
• pp.130-137
• /
• 2016

Non-destructive testing methods for composite materials (e.g., carbon fiber-reinforced and glass fiber-reinforced plastic) have been widely used to detect damage in the overall industry. This study detects defects using optical infrared thermography. The transient heat transport in a solid body is characterized by two dynamic quantities, namely, thermal diffusivity and thermal effusivity. The first quantity describes the speed with thermal energy diffuses through a material, whereas the second one represents a type of thermal inertia. The defect detection rate is increased by utilizing a lock-in method and performing a comparison of the defect detection rates. The comparison is conducted by dividing the irradiation method into reflection and transmission methods and the irradiation time into 50 mHz and 100 mHz. The experimental results show that detecting defects at 50 mHz is easy using the transmission method. This result implies that low-frequency thermal waves penetrate a material deeper than the high-frequency waves.