• Korean Journal of Poultry Science
• /
• v.15 no.2
• /
• pp.81-91
• /
• 1988

The purpose of this research is to analyze the tendencies of poultry consumption in Korea. The information used is the data collected three times during the period from Sept. 1, 1985 to April 30, 1987 throughout the major cities. Those who participated in the survey are 2, 598 including housewives, nutritionists, cookers, group feeding institutions, woman's organizations, and the students of doing nutrition－related studies. Consumer preferences for poultry meat and eggs tend to move toward high quality and more strict sanitary standards. Following this line of consumer preference changes, the poultry product marketing supported by cold chain system is rapidly developing. Household consumption of poultry meat largely consists of hi－and semi－broilers but the household demand for these two broilers tends to decrease steadily over time. In general poultry meat consumption appears to be affected by consumer taste rather than market factors such as prices. In addition consumer choices are quite different depending on poultry meat parts which are preferred in order of drum sticks, wings, and breasts. In particular drum sticks are most preferred than any other parts. An important problem in poultry production is related to consumption seasonality since large part of poultry meat consumption is concentrated during the summer season. Another problem is associated with little development of cooking methods. At present there are two types of primary commercial cooking techniques, fries and samgaetang (boiled chicken with jinsang and rice). For promoting domestic poultry meat disposal and reducing the demand seasonality, new cooking methods should be developed and followed by more aggresive advertisements. In domestic egg trade, smaller packing units(i.e., 10 eggs per unit) tend to bi preferred to large ones (i.e., 30 eggs per unit). In consumers egg purchasing decisions nearness to the shops and convenience appear to be important factors. For egg shell colors consumers recognize that there is no difference in nutritional values. However, survey results show that consumers highest preference lies in eggs with brown color. Eggs are most popular among children and preferred in order of middle－and high－school students, 17-25 age people, and adults. Egg prices are concieved relatively cheap to its nutritional values. In house－holds eggs are consumed in the forms of fries, side dishes, and lunch basket dishes. However, high level of cholesterol content in eggs appears to be an important problem in promoting eggs consumption.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.135-149
• /
• 2000

Most of prior works on testing parallel programs have concentrated on how to guarantee the reproducibility by employing event traces exercised during executions of a program. Consequently, little work has been done to generate test cases, especially, from specifications produced from software development process. In this research work, we devise the techniques for deriving test cases automatically from the specifications written in Message Sequence Charts(MSCs) which are widely used in telecommunication areas and develop the testing environment for performing module testing of parallel programs with derived test cases. For deriving test cases from MSCs, we have to uncover the causality relations among events embedded implicitly in MSCs. For this, we devise the methods for adapting vector time stamping to MSCs, Then, valid event sequences, satisfying the causality relations, are generated and these are used as test cases. The generated test cases, written in TTCN, are translated into CHILL source codes, which interact with a target module to be tested and test the validity of behaviors of the module. Since the testing method developed in this research work extracts test cases from the MSC specifications produced front telecommunications software development process, it is not necessary to describe auxiliary specifications for testing. In audition adapting vector time stamping generates automatically the event sequences, the generated event sequences that are ones for whole system can be used for individual testing purpose.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• Journal of the Korean association of regional geographers
• /
• v.2 no.1
• /
• pp.69-85
• /
• 1996

This research adoptes a spatial analysis function of the Geographic Information System[GIS] to analyze the location and the service district of a collective consumption facility, to discover the optimal location, and to redefine the service district. The location and spatial district of a collective consumption facility strongly influences the quality of life of residents. This research studies administrative offices and districts, especially Gu-offices in Ulsan. Ulsan would be raised to the status of Kwangyokshi in 1997; so that, the status of four Gus would be changed from a general administration into a self-governing administration. The summary of this research focuses on five significant points. First, the districts of four Gus were strongly required to be redefined to obtain the maximization of the degree of potential development as well as of the efficiency and equity of administring services. The spatial range of residents in a Gu was not in accord with its administrative district. The administrative districts of four Gus in Ulsan were not balanced in terms of area and population, and the high degree of disparity among Gus existed the efficiency and equality of a collective consumption service. Second, the current gu-offices were located based on security of land and accessibility of a main route; so, there was difficult to find the creteria and the principles of selections of the location of Gu offices. The social disparity of an administrative service existed in the accessibility into Gu-offices. Third, the administrative districts of Gus were redefined with spatial analysis tool of ARC/INFO. It was recommended that Ulsan maintain four Gus under the condition of five Kwangyokshi in South Korea. The redefined districts of administration reduced the disparity among four Gus in terms of area and population. improved the degree of harmony between the spatial range of residents of Gus and the administrative district of Gus, and increased the efficiency and equity of administrative service. Fourth, within the redefined adminis trative district of a Gu, the centroid reduced the maximum distance and mean distance; so, the efficiency and equity of public service provided by the Gu-office were improved. Last, the spatial analysis function of GIS helped to select the optimal location and to delineate the district of public service with more speedly and objectively. The function of spatial analysis of GIS was very useful to minimize the conflict in the determination of the location of a collective consumption facility and of the service district. To improve location analysis with GIS. non-spatial data base such as budget, thought of residents, and development policy and program, should be constructed.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.298-303
• /
• 2014

In this study, we examine the trends and types of incidents frequently occur during radiation therapy by using the data from the radiation oncology safety information system (ROSIS), according to discovery method explores the development direction of future research accident cause factor control method. This study was carried out analysis of incident data in ROSIS nearly 1163 cases in last 11 years from 2003 to 2013. We categorized into treatment methods, found the time, discoverer of occupations and finding ways to analyze the data. Then, we calculate the percentage and the classification for each item. About 1163 cases of incident cases including the near miss cases, external radiation therapy, brachytherapy and other were 97%, 2% and 1%. In the case was improperly planned dose delivery was 44% (497 cases) which 429 cases (86%) was found before 3 fractions and 13 cases were found after 11 fractions. The investigation was found to be distributed in various a found times. Approximately 42% of found time was during treatment and 29% of patients were found the problem during inspection chart. Occupation to discover the most radiation accidents was the radiation therapist (53%) who works in treatment room. Among 1163 incidence cases, 24% cases were found the accident before the treatment, therefore most of accident were found after of during the treatment (70%, 813 cases). This trend is acquired through ROSIS analysis, is expected to be not significantly different in the case of Korea, so it is necessary more diverse and systematic research for the prevention and early detection by using the ROSIS data.

• The Korean Journal of Nuclear Medicine
• /
• v.36 no.6
• /
• pp.344-356
• /
• 2002

Purpose: RBC blood pool SPECT has been used to diagnose focal liver lesion such as hemangioma owing to its high specificity. However, low spatial resolution is a major limitation of this modality. Recently, ordered subset expectation maximization (OSEM) has been introduced to obtain tomographic images for clinical application. We compared this new modified iterative reconstruction method, OSEM with conventional filtered back projection (FBP) in imaging of liver hemangioma. Materials and Methods: Sixty four projection data were acquired using dual head gamma camera in 28 lesions of 24 patients with cavernous hemangioma of liver and these raw data were transferred to LINUX based personal computer. After the replacement of header file as interfile, OSEM was performed under various conditions of subsets (1,2,4,8,16, and 32) and iteration numbers (1,2,4,8, and 16) to obtain the best setting for liver imaging. The best condition for imaging in our investigation was considered to be 4 iterations and 16 subsets. After then, all the images were processed by both FBP and OSEM. Three experts reviewed these images without any information. Results: According to blind review of 28 lesions, OSEM images revealed at least same or better image quality than those of FBP in nearly all cases. Although there showed no significant difference in detection of large lesions more than 3 cm, 5 lesions with 1.5 to 3 cm in diameter were detected by OSEM only. However, both techniques failed to depict 4 cases of small lesions less than 1.5 cm. Conclusion: OSEM revealed better contrast and define in depiction of liver hemangioma as well as higher sensitivity in detection of small lesions. Furthermore this reconstruction method dose not require high performance computer system or long reconstruction time, therefore OSEM is supposed to be good method that can be applied to RBC blood pool SPECT for the diagnosis of liver hemangioma.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.195-209
• /
• 2021

According to the 2019-2020 social media usage survey conducted by the Seoul e-commerce center, 5 out of 10 consumers have experienced shopping through social media. The cost of traditional advertising media has been reduced and advertising spending on social media has risen by 74%, indicating that social media is becoming a more important marketing element. While the number of users of social media has increased and corporate marketing activities have increased accordingly, research has been conducted in various aspects of marketing such as user motivation for social media, satisfaction, and purchase intention. There was no subdivided study on the differences in the social media usage frequency of consumers in actual purchasing behavior. This study attempted to identify differences in consumer characteristics by cluster in the agrifood purchase situation by grouping them by type according to the frequency of use of social media for consumers who purchase agri-food online. Product involvement, product need, and online purchase channel Consumer characteristics such as demographic distribution, perceived risk, and eating and lifestyle in each cluster were checked for the three agrifood purchase situations including choice, and types for each cluster were presented. To this end, questionnaire data on the frequency of social media use and online agrifood purchase behavior were collected from 245 consumers, and the validity of the measurement variables was secured through factor analysis and reliability analysis. As a result of cluster analysis according to the frequency of social media use, it was divided into three clusters. The first cluster was a group that mainly used open social media, and the second cluster was a group that used both open and closed social media and online shopping malls; The third cluster was a group with low online media usage overall, and the characteristics of each cluster appeared. Through regression analysis, the effect on product involvement, product need, and purchase channel selection when purchasing agri-food online through each of the three clusters was confirmed through regression analysis. As a result of the regression analysis, the characteristic of cluster 1 in the situation of purchasing agri-food online is a male in his 30s living in a rural area who has no reluctance to purchase agri-food on social media or online shopping malls. The characteristics of cluster 2 are mainly consumers who are interested in purchasing health food, and the consumer characteristics are represented. In the case of cluster 3, when purchasing products online, they purchase after considering quality and price a lot, and the consumer characteristics are represented as people who are more confident in purchasing offline than online. Through this study, it is judged that by identifying the differences in consumer characteristics that appear in the agri-food purchase situation according to the frequency of social media use, it can be helpful in strategic judgments in marketing practice on social media customer targeting and customer segmentation.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1135-1147
• /
• 2021

In order to geometrically correct high-resolution satellite imagery, the sensor modeling process that restores the geometric relationship between the satellite sensor and the ground surface at the image acquisition time is required. In general, high-resolution satellites provide RPC (Rational Polynomial Coefficient) information, but the vendor-provided RPC includes geometric distortion caused by the position and orientation of the satellite sensor. GCP (Ground Control Point) is generally used to correct the RPC errors. The representative method of acquiring GCP is field survey to obtain accurate ground coordinates. However, it is difficult to find the GCP in the satellite image due to the quality of the image, land cover change, relief displacement, etc. By using image maps acquired from various sensors as reference data, it is possible to automate the collection of GCP through the image matching algorithm. In this study, the RPC of KOMPSAT-3A satellite image was corrected through the extracted matching point using the UAV (Unmanned Aerial Vehichle) imagery. We propose a pre-porocessing method for the extraction of matching points between the UAV imagery and KOMPSAT-3A satellite image. To this end, the characteristics of matching points extracted by independently applying the SURF (Speeded-Up Robust Features) and the phase correlation, which are representative feature-based matching method and area-based matching method, respectively, were compared. The RPC adjustment parameters were calculated using the matching points extracted through each algorithm. In order to verify the performance and usability of the proposed method, it was compared with the GCP-based RPC correction result. The GCP-based method showed an improvement of correction accuracy by 2.14 pixels for the sample and 5.43 pixelsfor the line compared to the vendor-provided RPC. In the proposed method using SURF and phase correlation methods, the accuracy of sample was improved by 0.83 pixels and 1.49 pixels, and that of line wasimproved by 4.81 pixels and 5.19 pixels, respectively, compared to the vendor-provided RPC. Through the experimental results, the proposed method using the UAV imagery presented the possibility as an alternative to the GCP-based method for the RPC correction.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.221-232
• /
• 2021

This study analyzed co-registration results according to the geometric processing level of reference image, which are Level 1R and Level 1G provided from KOMPSAT-3 and KOMPSAT-3A images. We performed co-registration using each Level 1R and Level 1G image as a reference image, and Level 1R image as a sensed image. For constructing the experimental dataset, seven Level 1R and 1G images of KOMPSAT-3 and KOMPSAT-3A acquired from Daejeon, South Korea, were used. To coarsely align the geometric position of the two images, SURF (Speeded-Up Robust Feature) and PC (Phase Correlation) methods were combined and then repeatedly applied to the overlapping region of the images. Then, we extracted tie-points using the SURF method from coarsely aligned images and performed fine co-registration through affine transformation and piecewise Linear transformation, respectively, constructed with the tie-points. As a result of the experiment, when Level 1G image was used as a reference image, a relatively large number of tie-points were extracted than Level 1R image. Also, in the case where the reference image is Level 1G image, the root mean square error of co-registration was 5 pixels less than the case of Level 1R image on average. We have shown from the experimental results that the co-registration performance can be affected by the geometric processing level related to the initial geometric relationship between the two images. Moreover, we confirmed that the better geometric quality of the reference image achieved the more stable co-registration performance.

• Journal of vocational education research
• /
• v.36 no.1
• /
• pp.77-103
• /
• 2017

The purposes of this study are 1) to analyse the importance and performance of the success factors in steps of Formation process Of Cooperation NetWork(FoCNW) of educational institutions and businesses, and 2) to draw the success factors that need improvement. To achieve these purposes a survey research was conducted with a group of 1,098 (professors, teachers and workers in charge of cooperation at universities, technical colleges, vocational high schools and businesses which are equipped with a cooperation system), and 339 questionnaires were analyzed. The major results of the study are as follows. Firstly, while cooperation workers showed high recognition on the importance of success factors in steps of FoCNW, their performance of those factors was relatively low. Secondly, both the recognition of importance and performance of success factors in steps of FoCNW was higher in educational institutions than in businesses. Thirdly, the success factors in need of improvements from both educational institutions and businesses are 'collecting outer information and consulting' and 'publicizing cooperation competency', 'setting cooperative activities (programs) and contents of agreements', 'managing cooperation quality formally', 'drawing plans for sustainable cooperation improvement' and 'diffusing cooperation network'. The success factors in need of improvements from educational institutions are 'perceiving necessity of and forming consensus on cooperation' and 'deciding and supporting the worker in charge of cooperation', and 'participating and sharing of organization members'. The success factors in need of improvements from businesses are 'deciding goals and performance strategies', 'developing mutual understanding and checking possibility of cooperation with potential partners', and 'evaluating cooperation activities and their outcomes and providing feedback' and 'adjusting contents of agreements and deciding whether to maintain cooperation'. Therefore, efforts from each partner to improve those factors and support from related organizations are necessary.