• Proceedings of the KIEE Conference
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2445-2447
• /
• 2002

In this paper, CAN-based feedback control system is proposed for the pressurization system of korean high-speed train. The control performance of the system is evaluated. According to the requirement of the pressurization system A process model considering network delay and an adaptive PID control method based on the process model are proposed here. And it is shown that the proposed adaptive PID control method considering the network delay has on adequate feature compared to some other existing methods consequently it can be considered to be applied the pressurization system of korean high-speed train.

• Management & Information Systems Review
• /
• 제2권
• /
• pp.133-167
• /
• 1998

This article discusses the findings of an empirical study conducted on 62 large organizations. The major purpose of the study was to analyze the relationship of Information System Resources distribution between the system plan control and system development and system operation. In this study information system resource is broadly Identified by computer hardware, software, data, procedure, operator. Because of the real centralization/decentralization issue facing organizations is much broader then the choice between alternative computer hardware configurations. And there are three separate resources of the information system that can be decentralized system plan and control, system development, system operations. The decision regarding how to organize each of these three separate resources is based on a different set of criteria. Furthermore, each decision can be made relatively independently of the others. In this article the results of a study are indicated below. In the degree of decentralization of information system resources between system plan control and system development and system operations were found the positive relationship. Therefore, the more information system resources are decentralized in the one dimension, the more information system resources are decentralized in the other dimensions, and the more information system resources are centralized in the one dimension, the more information system resources are centralized in the other dimensions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.906-911
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent contorl system to be wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steening, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR (Infrared) modem. Epecially it is possible to easily network to use not an exclusive controller of AGV but

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.620-625
• /
• 2008

The $H_{\infty}$ entropy in $H_{\infty}$ control theory is discussed based on investigating information transmission in continuous-time linear stochastic systems. It is proved that the stabilizing feedback does not change the time-average information transmission between system input and output, and the $H_{\infty}$ entropies of open- and closed-loop stable transfer functions are bounded by mutual information rate between input and output in the open-loop system. Furthermore, a new $H_2$ upper bound for $H_{\infty}$ entropy is introduced with a numerical example. Thus the $H_{\infty}$ entropy of a stable transfer function is sandwiched between $H_2$ norms of the original system and a static feedback system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1915-1919
• /
• 1991

The efficiency of automated assembly line is increased by realizing the automation of each assembly cell, monitoring the line information and developing the real-time line control system it. which production flow is controllable. In this paper, the several modules which are important factors when constructing automated real-time control system, such as, line control S/W module, real-time model change module, error handling module and line production management S/W module, are developed. For developing these important programming modules, real-time control and multi-tasking techniques are integrated. In this paper, operating method of real-time line control in PCB automated assembly line is proposed and for effective control of production line by using multi-tasking technique, proper operating method for relating real-time line control with multi-tasking is proposed by defining the levels of signals and tasks. CIM-Oriented modular programming method considering expandability and flexibility will be added for further research in the future.

• Journal of Institute of Control, Robotics and Systems
• /
• 제18권8호
• /
• pp.719-724
• /
• 2012

A traffic detection system is a device that collects traffic information around an intersection. Most existing traffic detection systems provide very limited traffic information for signal control due to the restriction of vehicle detection area. A signal control scheme determines the transition among signal phases and the time that a phase lasts for. However, the existing signal control scheme do not resolve the traffic congestion effectively since they use restricted traffic information. In this paper, a new traffic detection system with a zone division signal control scheme is proposed to provide correct and detail traffic information and decrease the vehicle's waiting time at the intersection. The traffic detection system obtains traffic information in a way of vehicle-to-roadside communication between vehicles and sensor network. A new signal control scheme is built to exploit the sufficient traffic information provided by the proposed traffic detection system efficiently. Simulation results show that the proposed signal control scheme has 121 % and 56 % lower waiting time and delay time of vehicles at an intersection than other fuzzy signal control scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1090-1095
• /
• 1992

This paper describes the systematic control method of process information transfer and machine cell control in FMS implementation. We have constructed an experimental FMS computer network and control system. The system hardware consists of host computer to manage process data and information transfer of machine cells, cell control computers to control machine cells(NC lathe, machining center). On the other hand, software is made up of oredr management module, NC program searching and generation module, NC part program error check module and cell control module. In this study, we could arrive at conclusion as following : The first, each task could be accomplihed by the efficient information transfer in hierachical computer network. The second, data base system of part programs and process control data is needed for the efficint information transfer and production management. Lastly, expansion of FMS control system could be achieved by the hierachical and decentralized computer control system.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.105-109
• /
• 2008

A robust optimal control system design algorithm in active suspension equipment adopting linear matrix inequalities control system design theory is presented. The validity of the linear matrix inequalities robust control system design in active suspension system through the numerical examples is also investigated.

• International Journal of Advanced Culture Technology
• /
• 제12권1호
• /
• pp.293-298
• /
• 2024

The purpose of an internal control system is to prevent the occurrence of errors and fraud in the process of producing accounting information, thereby providing investors with reliable information. For the effective operation of an internal control system, it is necessary to secure a sufficient number of personnel and experienced staff. This study focuses on the personnel directly involved in producing accounting information, examining whether companies that invest in their internal control staff experience a mitigation in the phenomenon of valuation errors. The analysis revealed that the size and experience months of the personnel responsible for internal control have a significant negative relationship with valuation errors. This result implies that by securing sufficient personnel for the smooth operation of the internal control system and placing experienced staff within the system, investors can effectively make judgments about the intrinsic value based on quality accounting information, thereby reducing valuation errors.

• Journal of information and communication convergence engineering
• /
• 제18권1호
• /
• pp.16-21
• /
• 2020

Owing to the convergence of the communication network with the control system and public network, security threats, such as information leakage and falsification, have become possible through various routes. If we examine closely at the security type of the current control system, the operation of the security system focuses on the threats made from outside to inside, so the study on the detection system of the security threats conducted by insiders is inadequate. Thus, this study, based on "Spotting the Adversary with Windows Event Log Monitoring," published by the National Security Agency, found that event logs can be utilized for the detection and maneuver of threats conducted by insiders, by analyzing the validity of detecting insider threats to the control system with the list of important event logs.