• International Journal of Industrial Entomology and Biomaterials
• /
• 제20권2호
• /
• pp.37-43
• /
• 2010

The wild silkworm, Antheraea mylitta Drury (Lepidoptera: Saturniidae) is a polyphagous silk producing insect that feeds on Terminalia arjuna, T. tomentosa and Shorea robusta and is distributed in the forest belts in different states of India. Phenotypically distinct populations of the A. mylitta are called "eco-race" or "ecotypes". Genetic improvement of this wild silkworm has not progressed much due to lack of adequate information on the factors that control the expression of most of the economically important traits. Considering the amazing technological advances taking place in molecular biology, it is envisaged that it is now possible to take greater control on these intractable traits if a combination of genetic, molecular and bioinformatics tools are used. Linkage disequilibrium (LD) mapping is one such approach that has extensively been used in both animal and plant system to identify quantitative trait loci (QTLs) for a number of economically important traits. LD mapping has a number of advantages over conventional biparental linkage mapping. Therefore, LD mapping is considered more efficient for gene discovery to meet the challenge of connecting sequence diversity with heritable phenotypic differences. However, care must be taken to avoid detection of spurious associations which may occur due to population structure and variety interrelationships. In this review, we discuss how LD mapping is suitable for the dissection of complex traits in wild silkworms (Antheraea mylitta).

• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.142-150
• /
• 2021

Open-channel SSD is a new type of Solid-State Disk (SSD) that improves the garbage collection overhead and write amplification due to physical constraints of NAND flash memory by exposing the internal structure of the SSD to the host. However, the host-level Flash Translation Layer (FTL) provided for open-channel SSDs in the current Linux kernel consumes host memory excessively because it use page-level mapping table to translate logical address to physical address. Therefore, in this paper, we implemente a selective mapping table loading scheme that loads only a currently required part of the mapping table to the mapping table cache from SSD instead of entire mapping table. In addition, to increase the hit ratio of the mapping table cache, filesystem information and mapping table access history are utilized for cache replacement policy. The proposed scheme is implemented in the host-level FTL of the Linux kernel and evaluated using open-channel SSD emulator. According to the evaluation results, we can achieve 80% of I/O performance using the only 32% of memory usage compared to the previous host-level FTL.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.723-728
• /
• 2004

Recently, because of the extensive use of geographic information in the various fields, the requirement for the easy circulation and utilization of the various geographic information among the individuals, organizations, societies and countries is raised. In order to support the interoperability of the heterogeneous geographic information in the various fields, OGC(Open GIS Consortium) proposed the GML(Geography Markup Language) specification that defines the XML encoding rule about the heterogeneous geographic information. In addition, ISO/TC 211 adopted the GML specification to make it as the international standard. Therefore, in this paper, we first analyzed the GML 3.0 specification in detail that can support the interoperability of the heterogeneous geographic information. And then we suggested and applied the mapping rule that define the encoding method to improve the encoding process easily and efficiently. Finally, we designed and implemented the GML 3.0 encoding system using the mapping rule to encode the geographic information that was constructed in spatial databases into the GML 3.0 document. Especially, we used ZEUS as a spatial database system to test our encoding system in this paper.

• 지능정보연구
• /
• 제12권2호
• /
• pp.33-48
• /
• 2006

의미 웹(Semantic Web)과 이에 대한 관련기술들은 웹을 통해 자유롭게 정보를 공유할 수 있는 새로운 지평을 마련해 주었다. 이를 토대로 온톨로지(Ontology)에 대한 연구 역시 활발히 진행되어 왔으며, 결과적으로 온톨로지는 여러 가지 측면에서 가시적인 성과들을 이룩해 낼 수 있었다. 의미 웹에 대한 기대가 고조되면서, 온톨로지는 많은 연구 학자들로부터 각광을 받는 분야로 떠오를 수 있었으며, 오늘날, 이러한 온톨로지에 대한 연구는 지식표현Knowledge-Representation)등과 같은 학술적인 단계에서 벗어나 전자상거래 분야까지 그 영역을 넓혀 나가고 있다. 그러나 일부에서는 이러한 온톨로지의 양산으로 인해 발생할 문제들에 대한 우려의 목소리가 적지 않다. 즉, 현재 온톨로지들은 서로간의 이질성으로 인해 그 효용 가치를 위협받고 있다는 것이다. 예를 들어, 현재 Yahoo나 DMOZ Open Directory(www.(dmoz.org)등으로부터 제공 중인 상품 카테고리의 경우, 시각적으로는 유사해 보일지 모르나 그들이 지닌 카테고리 구조라든지 사용된 용어 등을 살펴보면 상당한 차이점이 존재한다는 사실을 발견해 낼 수 있다. 따라서 현재 온톨로지가 지향하는 본래의 효용 가치를 극대화시키기 위해서는 이러한 이질성을 극복할 수 있는 방법론이 반드시 필요하다고 할 수 있다. 본 연구에서는 현재 온톨로지 분야에서 가장 커다란 이슈로 떠오르고 있는 정보통합에 대한 해결책을 제시해 보고자 한다. 정보통합이란, 서로 이질적인 프로그래밍 언어나 형식으로 이루어진 데이터들을 통합하여 요약한 형태로 제공하는 기술이라 정의 내릴 수 있다. 이러한 정보 통합의 대표적인 분야로 Merging, Alignment, Translation, Articulation을 들 수 있는데, 이 가운데, 본 연구에서는 "Ontology Alignment"에 대해 집중적으로 다루어 보고자 한다. 이와 더불어, 현재 의미 웹이 지향하는 대표적인 특성 중 하나로써 상호운영성을 꼽을 수 있다. 온톨로지 매핑(Ontology mapping)은 이러한 상호운영성을 지원하기 위한 대표적인 기술로써 각광을 받고 있다. 따라서 우리는 이러한 온톨로지 매핑에 대한 방법론을 쇼핑몰 환경에 적용함으로써 서로 이질적인 상품 카테고리로 구성된 두 쇼핑몰간의 상품에 대한 매핑 알고리즘(Mapping Algorithm)을 제안하고자 한다. 또한, 효용성 검증을 위하여 온톨로지 매핑에 있어 이미 효용성을 검증 받은 PROMPT와의 비교 분석도 수행하여 본다.

• 한국지리정보학회지
• /
• 제25권1호
• /
• pp.56-76
• /
• 2022

본 연구는 커뮤니티 매핑 과정에 스마트기기로 수집된 공간분석 정보를 제공하고 공유하여 시민들이 자신의 의견을 객관적으로 검토할 수 있는 기회를 제공하고, 이러한 공간정보의 제공이 시민들의 의사결정과 인식에 어떤 영향을 미치는지를 살펴보았다. 연구를 위해 부산광역시 중구 영주동을 사례지역으로 선정하여 이 지역의 초등학생 보행안전 문제를 개선하기 위한 위험지역 선정을 목표로 커뮤니티 매핑을 진행하였다. 시민들은 자신들의 경험과 인식을 기반으로 1차 위험지도를 작성하고, 드론과 센서 등 스마트기기로 수집된 보행안전시설과 유동인구 공간정보를 공유한 후 2차 위험지도를 작성하였다. 1차, 2차 위험지도를 비교한 결과 많은 구간에서 순위 변동이 발생했으며, 참여주민들이 인식했던 것보다 객관적으로 측정된 유동인구가 많고 안전시설이 미비한 지역의 순위가 상향되었다. 또한, 주민 설문조사 결과를 살펴보면, 커뮤니티 매핑과정에서 스마트기기 기반 공간분석 정보의 제공은 시민들의 지역문제 인식에 도움을 주었을 뿐 아니라 본인들이 제출한 의견이 정책에 반영될 수 있을 것이라는 기대감도 증가시키는 것으로 나타났다. 또한 참여자들이 직접 만들어 낸 결과물에 대한 신뢰도 향상되어 주민 스스로 자신감과 믿음을 갖는데 도움을 주는 것으로 나타났다.

• 대한조선학회논문집
• /
• 제61권3호
• /
• pp.143-151
• /
• 2024

In this study, we present a mapping framework for 3D spatial reconstruction of digital twin model using navigation and perception sensors mounted on an Autonomous Surface Vehicle (ASV). For improving the level of realism of digital twin models, 3D spatial information should be reconstructed as a digitalized spatial model and integrated with the components and system models of the ASV. In particular, for the 3D spatial reconstruction, color and 3D point cloud data which acquired from a camera and a LiDAR sensors corresponding to the navigation information at the specific time are required to map without minimizing the noise. To ensure clear and accurate reconstruction of the acquired data in the proposed mapping framework, a image preprocessing was designed to enhance the brightness of low-light images, and a preprocessing for 3D point cloud data was included to filter out unnecessary data. Subsequently, a point matching process between consecutive 3D point cloud data was conducted using the Generalized Iterative Closest Point (G-ICP) approach, and the color information was mapped with the matched 3D point cloud data. The feasibility of the proposed mapping framework was validated through a field data set acquired from field experiments in a inland water environment, and its results were described.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권4호
• /
• pp.209-215
• /
• 2009

Reconfigurable array architecture is recently attracting much attention. It is a flexible hardware architecture, which can dynamically change its configuration to execute various functions while maintainning high performance. However, pursuing flexibility and performance at the same time leads to complexity, thereby makes the mapping of applications a difficult process. There have been attempts to use compiler or high level synthesis techniques to solve the problem. In this paper, we propose yet another method, which uses libraries for the mapping to provide an abstracttion of the internal structure and at the same time to reduce the development time and efforts through the automated process. We have selected a JPEG decoder as an example to apply the proposed method. As a result, we obtained about 20% less performance compared to manual mapping but development time is dramatically reduced to less than 1%.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.705-708
• /
• 2005

Mobile Mapping Systems using the vehicle equipped the GPS, IMU, CCD Cameras is the effective system for the management of the road facilities, update of the digital map, and etc. They must provide users with the sensor data which is acquired by Mobile Mapping Systems in real-time so that users can process what they want by using the latest data. But it' s not an easy process because the amount of sensor data is very large, particularly image data to be transmitted. So it is necessary to reduce the amount of image data so that it is transmitted effectively. In this study, the effective method was suggested for the compression/decompression image data using the Wavelet Transformation and Huffman Coding. This technique will be possible to transmit of the geographic information effectively such as position data, attitude data, and image data acquired by Mobile Mapping Systems in the wireless internet environment when data is transmitted in real-time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.851-852
• /
• 2008

In this paper, we propose a tone mapping method using Non-linear Dynamic Range Normalization (NDRN) for High Dynamic Range (HDR) images. HDR images are not suitable for commercial display devices because dynamic range of HDR images do not match with one of Low Dynamic Range (LDR) display devices. To reproduce a tone of HDR images for LDR displays, tone mapping methods have been proposed such as local and global tone mapping. We introduce NDRN to locate mean of HDR images at the center of LDR. NDRN preserves the details for highlight and shadow. By suppressing the significant luminance change in tone mapping, naturalness of original image can be also preserved. The experimental results show that the proposed method preserves details and naturalness of original images.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1165-1168
• /
• 2003

In this paper, a CLB-based CPLD low-power technology mapping algorithm is proposed. To perform low power technology mapping for CPLD, a given Boolean network have to be represented to DAG. The proposed algorithm are consist of three step. In the first step, TD(Transition Density) calculation have to be performed. In the second step, the feasible clusters are generated by considering the following conditions: the number of output, the number of input and the number of OR-terms for CLB(Common Logic Block) within a CPLD. The common node cluster merging method, the node separation method, and the node duplication method are used to produce the feasible clusters. In the final step, low power technology mapping based on the CLBs is packing the feasible clusters into the several proper CLBs. Therefore the proposed algorithm is proved an efficient algorithm for a low power CPLD technology mapping.