• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.1 s.307
• /
• pp.1-8
• /
• 2006

This thesis proposes Arithmetic Shift Register(ASR) which can be used as pseudo random number generator. Arithmetic Shift. Register is defined as progression that multiplies random number D , not 0 or 1 at initial value which is not 0, and it is represented as ASR-D in this thesis. Irreducible polynomial that t which makes $'D^k=1'$ satisfies uniquely as $'t=2^n-1'$ over. $GF(2^n)$ is the characteristic polynomial of ASR-D , and the cycle of Arithmetic Shift Register has maximum cycle as $'2^n-1'$. Galois Linear Feedback Shift Register corresponds to ASR-2-1. Therefore, Arithmetic Shift Register proposed in this thesis generalizes Galois Linear Feedback Shift Register. Linear complexity of ASR-D over$GF(2^n)$ is $'n{\leq}LC{\leq}\frac{n^2+n}{2}'$ and in comparison with existing Linear Feedback Shift Register stability is high. The Software embodiment of arithmetic shift register proposed in this thesis is efficient than that of existing Linear Shift Register and hardware complexity is equal. Arithmetic shift register proposed in this thesis can be used widely in various fields such as cipher, error correcting codes, Monte Carlo integral, and data communication etc along with existing linear shift register.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1585-1592
• /
• 2018

Due to un-balancing weight allocation on the wheelchair the existing wheelchair system are faced with the risk of flipping or falling when a wheelchair goes up to a hill. In to order to be safer during riding the wheelchair, in this paper, we proposed a real-time new solution using the integrated Gyro Sensor and Tilt Sensor for controlling the balance. Because the typical property of wheelchair is for the special user who meets the difficulty in moving on foot the maintain the balance of wheel-chair systems have become important and helpful. In our method, we calculate the seat angle using information from Tilt Sensor. However, due to the law of inertia when a wheelchair is moving there is a deviation in the output value of Tilt Sensor. Therefore, we have to optimize the value of the angle by utilizing the acceleration that is the output of the Gyro Sensor. We took the advantages by using the combination of Gyro and Tilt sensors. Moreover, we also solved the consumption issue of the whole system. Through various experimentations with usage of ZigBee sensor module, the power consumption for the balancing system is reduced significantly.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.335-341
• /
• 2014

To play the networked video contents in a client's mobile device in real time, the contents should be delivered to it by the contents server with streaming technology. Generally, in a server-client based commerce model, the server is in charge of both the authentication of the paid customer and distribution of the contents. The drawback of it is that if the customers' requests go on growing rapidly, the service quality would be degraded results from the problems of overloaded server or restricted network bandwidth. On the contrary, in P2P based networks, more and more the demand for service increasing, the service quality is upgraded since a customer can act as a server. But, in the P2P based network, there are too many servers to manage, it's possible to distribute illegal contents because the P2P protocol cannot control distributed servers. Thus, it's not suitable for commercial purposes. In this paper, the dymanic group authentication scheme is proposed which is suited to P2P based applications. The proposed scheme consists of group based key generation, key update, signature generation and verification protocols. It can control the seeder's state whether the seeder is joining or leaving the network, and it can be applied to hybrid P2P based commerce model where sales transactions are covered by the index server and the contents are distributed by the P2P protocol.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.471-477
• /
• 2014

In this paper, we propose a low-cost license plate recognition system based on smart cam system using Android. The proposed system consists of a portable device and server. Potable device Hardware consists of ARM Cortex-A9 (S5PV210) processor control unit, a power supply device, wired and wireless communication, input/output unit. We develope Linux kernel and dedicated device driver for WiFi module and camera. The license plate recognition algorithm is consisted of setting candidate plates areas with canny edge detector, extracting license plate number with Labeling, recognizing with template matching, etc. The number that is recognized by the device is transmitted to the remote server via the user mobile phone, and the server re-transfer the vehicle information in the database to the portable device. To verify the utility of the proposed system, user photographs the license plate of any vehicle in the natural environment. Confirming the recognition result, the recognition rate was 95%. The proposed system was suitable for low cost portable license plate recognition device, it enabled the stability of the system when used long time by using the Android operating system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.977-983
• /
• 2007

Recently, the number of systems which utilize wireless power transmission to a receiving module in a short distance is increasing. For efficient use of receiving space, coils are wound around the ferrite core to produce electromotive force(emf) in suppling power by wireless transmission. This paper analyzed the magnetic flux density distribution in the ferrite core in magnetic field environment which is uniformly oriented along to a single axis at 125kHz. For numerical analysis, Ansoft Maxwell which is applying the FEM(Finite Element Method) method was used. We studied the variations of the gathered magnetic fluxes to the changes of the relative permeabilities of the ferrite cores. Also we calculated the magnetic flux variation by shaving the ferrite core off for the groove of coil winding. Results showed that using a small ferrite core in magnetic field at 100kHz band can increase the amount of magnetic flux $3{\sim}4 times$ than without the core. The magnetic flux decreased 23% by shaving the core 0.5 mm on the periphery of 4.75 mm radius core with the relative permeability 800.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.5 no.3
• /
• pp.27-45
• /
• 2010

It is strongly believed that multicast will become one of the most promising services on internet for the next generation. Multicast service can be deployed either on network-layer or application-layer. IP multicast (network-layer multicast) is implemented by network nodes (i.e., routers) and avoids multiple copies of the same datagram on the same link. Despite the conceptual simplicity of IP multicast and its obvious benefits, it has not been widely deployed since there remain many unresolved issues. As an alternative to IP multicast, overlay multicast (application-layer multicast) implements the multicast functionality at end hosts rather than routers. This may require more overall bandwidth than IP multicast because duplicate packets travel the same physical links multiple times, but it provides an inexpensive, deployable method of providing point-to-multipoint group communication. In this paper we develop an efficient method applied greedy algorithm for solving two models of overlay multicast routing protocol that is aimed to construct MDST (Minimum Diameter Spanning Tree : minimum cost path from a source node to all its receivers) and MST (Minimum Spanning Tree : minimum total cost spanning all the members). We also simulate and analyze MDST and MST.

• The Journal of the Korea Contents Association
• /
• v.16 no.4
• /
• pp.442-454
• /
• 2016

Recently, due to the increment of national income and the living standard of citizens, the leasure business has been dramatically expanded. Among the business, inland water activities such as cruise tour or water taxi have drawn attention from the people. As more people come for a new pleasure, the frequency and the number of services continues to rise yet the safety of people values less recently. In fact, the number of relating accidents also has risen accordingly. In order to prevent such accidents in inland waters, the vessels' real time voyage data, the advanced warning system and the emergency rescuing system are required. In this paper, we have developed navigation guiding application for safety of passengers and vessels in inland waters. Navigation guiding applications not only provide Inland Electronic Navigational Chart(IENC) and vessel information but also allows communication between traffic service center and nearby vessels in case of an emergency situation. In order to implement Navigation guiding applications, developing Inland Electronic Navigational Chart was inevitable. Therefore, IENC of Han River, has developed based on measuring the water depth using multi-beam echo sounder system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.47-53
• /
• 2018

This paper proposes a method to express an MP3 audio file by a series of color QR codes which can be printed on the paper. Moreover, the method can compress the data considerably. Firstly, an MP3 file is divided into many small files which have maximum capacity of binary file of a QR code. Secondly, the multiple files are converted to multiple black-and-white QR codes. Lastly, every three QR codes are combined into color QR codes. When combining, each of three black-and-white QR codes are regarded as red, green, blue components respectively. In this method, the areas of a color QR code where two QR codes are overlapped are expressed by the colors Cyan, Magenta and Yellow. And the areas where three components are overlapped are expressed by white color. Contrarily, the areas that no components are overlapped are expressed by white color. Experimentation result shows that an MP3 file with 8.5MB the original MP3 files are compressed with the compression rate around 15.7. This method has the advantage that can be used in the environments that the internet access is impossible.

• Journal of The Korean Association For Science Education
• /
• v.36 no.4
• /
• pp.527-538
• /
• 2016

The purpose of this study is to select the factors of 'Group scientific creativity' and to find out how 'Group scientific creativity' turns out in the creative problem-solving process of students. To select the factors that affect 'Group scientific creativity', this research extracted 27 influencing factors on the group creativity from the prior study and organized them according to opinions of education experts. To select factors that affect 'Group scientific creativity' in the creative problem-solving process of students, this research analyzed the group problem-solving process that has been done on 72 gifted students for two days. Main results of the study is as follows: First, nine elements such as scientific thinking, scientific knowledge, scientific information-processing capacity, motivation, challenge, age and gender, existence of diversity, creativity educational experience, and the group cohesiveness were selected as human factors. Four elements such as scientific communication skills, scientific inquiry process, autonomy, and leadership were selected as the combining factors. Also, three elements such as the learning environment, teacher types, and compensation were selected as the Environmental factors. Second, it was possible to find that the group scientific creativity influence factors affecting the creative process by analyzing the gifted students in creative-problem solving process. Based on these results, this study described additional points on the factors improving 'Group scientific-creativity.'

• Korean Journal of Social Welfare
• /
• v.66 no.4
• /
• pp.181-205
• /
• 2014

The purpose of this study is to analyze the process of growth of parental empowerment of the family of the children with development disabilities in an online parental community. For this purpose, 250 posts were selected from a web-forum of an online-community(internet CAFE) for patients with developmental disabilities in a Korean portal site. In addition, the selected posts were analyzed based on the grounded theory method. The results showed that the parents with high risk children for developmental disabilities interacted with each other in short answers, self-addressing, and discussion type interactions under the causal condition in which the subject parents were in need of help and sympathy. The factors that significantly affected the focus event, which is the interactive communication between the posters of the original threads and replies, included the moderating conditions based on whether the conversation was respectful, friendly, or for general evaluation, as well as the contextual condition of exclusive attitudes. The strategies of the interactions were composed of two categories of self-reflections and sharing through a human relationship. The results of these interactions were either further interactions (sharing) or shying away. With regard to the process of reinforcing the collective empowerment of the family, the 'determination,' 'tips,' and 'empathy' models were used for the explanation of the process. Lastly, we discovered that trust, support, continuous interactions, specific and practical information, as well as provision of diversified perspectives through collective experiences are necessary to achieve such improvement of collective family empowerment.