• Economic and Environmental Geology
• /
• v.27 no.1
• /
• pp.81-91
• /
• 1994

There has been considerable research dealing with the influence of surface roughness along surfaces of rock discontinuities in relation to the peak shear strength of rock masses. Concepts accepted recently for measuring such strength include estimation of a roughness coefficient such as developed by Barton's studies. The method for estimation the Joint Roughness Coefficient (JRC) value of a measured roughness profile is subjective. The aim of this research is to estimate the JRC value of the roughness of a surface profile in a rock mass system using an objective method. The study of roughness of surfaces has included measurement of fractal geometric characteristics. Once the irregularity of the surface has been described by the fractal dimension, the spatial variation of the surface irregularities can be described using variogram and drift analysis. An empirical relationships between the roughness profiles of selected JRC ranges and their fractal dimension with variogram and drift were derived. The application of analyses of fractal dimension, variogram and drift was novel for the analysis of roughness profiles. Also, an empirical equation was applied to experimental data.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.470-473
• /
• 2010

Graphene, consisting of a single layer of carbon in a two-dimensional lattice, has been emerging as a fascinating material with many unique physical, chemical and mechanical properties. In this study, graphenes were prepared by a chemical method. To develop high performance polymer nanocomposites reinforced by graphenes, adequate dispersion of the fillers and strong interfacial bonding between the fillers and the polymer matrix are essential. The purpose of this study was to examine the influence of introducing amine groups on the surfaces of graphenes. FT-IR spectroscopy, SEM were used to confirm the functionalization. Epoxy nanocomposites comprising the graphenes were prepared and their characteristics were investigated by DSC, DMA and TMA. Fracture surfaces of the nanocomposites were investigated by SEM. The functionalized graphenes induced strong interfacial bonding than the pristine graphenes and resulted in considerable improvements in the performance of the nanocomposites.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.225-230
• /
• 2016

Since the development of anodic aluminum oxide (AAO), extensive studies have been conducted ranging from fundamental research to the applications of AAO. Most of the research on AAO structures have focused on well-aligned nanoporous structures fabricated under specific conditions. This study investigated fabricable AAO structures with anodization performed with various temperatures, electrical potentials, and basal plane surfaces. As a result, nanoporous and nanofibrous structures were fabricated. The nanopores were formed at a relatively lower temperature and potential, and the nanofibers were formed at a relatively higher temperature and potential regardless of the basal plane surface. The shape of the base surface was found to influence the structural arrangement in nanoporous morphologies. These interesting findings relating to new morphologies have the potential to broaden the possible applications of AAO materials.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.160-160
• /
• 2011

In this work, magnesium (Mg) nanoparticles were plated onto the surfaces of multi-walled carbon nanotubes (MWNTs) in order to investigate the effects of their presence on the high pressure hydrogen storage behaviors of the resultant Mg/MWNTs. The structure of Mg/MWNTs was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The pore structure and total pore volumes of Mg/MWNTs were analyzed by $N_2$/77 K adsorption isotherms. The hydrogen storage behaviors of the Mg/MWNTs were investigated by BEL-HP at 298K and 100 bar. From the results, it was found that Mg particles were homogeneously distributed on the MWNT surfaces. The hydrogen storage capacity increased in proportion to the Mg content. It can be concluded that Mg paricles play an important role in hydrogen storage characteristics due to the hydrogen spillover effect.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.101-110
• /
• 1997

An experimental study was performed to discover the tribological behaviors of pure silver coated 52100 bearing steel. Pure silver coatings ranging from 80 nm to several micrometers were produced by a thermal evaporation coating method. Experiments using a thrust ball bearing-typed rolling test-rig were performed for the investigations of the influence of coating thickness on the tribological rolling behavior. The existence of optimum film thickness which revealed minimum rolling resistance was discovered. A careful analysis on the contact surfaces for the optimum film thickness has been performed. The contact patches produced by the transferred silver films played an important role for the rolling resistance to keep low.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.160-161
• /
• 2003

Thermocapillary convection is a surface tension driven flow due to a temperature gradient along an interface. It occurs during a crystal-growth process and therefore understanding the convection is important to material processing in microgravity. Although modelling of the float-zone crystal-growth process has been of interest for a few decades, most studies of liquid bridges assumed non-deformable flat surfaces. In reality, the surface profile, g(t,z), is unknown and should be obtained as a solution to the coupled transport equations along with the surface force balance. Here we report on a numerical study of axisymmetric thermocapillary convection in liquid bridges with deformable surfaces. The interface is determined as part of the complete solution. The influence of the capillary number (Ca), Reynolds number (Re), Prandtl number (Pr) and aspect ratio(Ar) on the dynamics is explored.

• Solar Energy
• /
• v.9 no.1
• /
• pp.62-69
• /
• 1989

This analysis is to investigate the influence of inflow angle when cooling air flows into PC (Printed Circuit) board channels. Flow between PC board channels with heat generating blocks is assumed laminar, incompressible, two-dimensional. Geometric parameters (block spacing (S), block height (H), block width (W) and channel height (L)) are held fixed. Inflow angle variations are $-10^{\circ},\;0^{\circ},\;10^{\circ}$, where uniform heat flux per unit axial length Q (W/m) from heated block surfaces is generated. The governing equations for velocity and temperature are solved by SIMPLE (Semi-Implicit Method Pressure for Linked Equation) algorithm. Nusselt number on each block surfaces is analyzed after a numerical calculation result. The result shows that the assumption on parallel inflow (inflow angle to channel, $0^{\circ}$) to PC board channels can be used without large error even when inflow' angle is varied.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.109-114
• /
• 1999

The deposition kinetics of fines on fibres was studied to elucidate the flocculation mechanism of a PAM/bentonite retention aid. It is shown that polymer-induced co-flocculation is not permanent. This phenomenon is attributed to a stabilising effect of polymer transfer between surfaces. The resulting polymer layers have a reduced bridging ability with naked surfaces. The addition of bentonite increases the bond strength between fibres and fines, and links non-briding layers. These results explain the positive influence of bentonite on fines retention.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.334-337
• /
• 1996

Si anisotropic etching is a key technology for micromachining. The main advantages of tetramethyl ammonium hydroxide (TMAH)-based solution are their full compatibility with IC process. In this work the anisotropic etching of single crystal Si in a TMAH (($CH_3$)$_4$NOH) based solution was studied. The influence of the addition of IPA to TMAH solution on their etching characteristics was also presented. The crystal planes bounding the etch front and their etch rates were determined as a function of temperature, crystal orientation, and etchant concentration. The etch rates of (100) oriented Si crystal planes decreased linearly with increasing the IPA concentration, The etched (100) planes were covered by Pyramidal-shaped hillocks below 15 wt.%, but very smooth surfaces were obtained above 20 wt.%. The addition of IPA to TMAH solution leads to smoother surfaces of sidewalls etched planes.

• Korean Management Science Review
• /
• v.24 no.2
• /
• pp.73-80
• /
• 2007

Robust Design(RD) is a cost-effective methodology to determine the optimal settings of control factors that make a product performance insensitive to the influence of noise factors. To better facilitate the robust design optimization, a dual response surface approach, which models both the process mean and standard deviation as separate response surfaces, has been successfully accepted by researchers and practitioners. However, the construction of response surface approximations has been limited to problems with only a few variables, mainly due to an excessive number of experimental runs necessary to fit sufficiently accurate models. In this regard, an innovative response surface approach has been proposed to investigate robust design optimization problems with larger number of variables. Response surfaces for process mean and standard deviation are partitioned and estimated based on the multi-level approximation method, which may reduce the number of experimental runs necessary for fitting response surface models to a great extent. The applicability and usefulness of proposed approach have been demonstrated through an illustrative example.