• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.240-246
• /
• 2018

The present study analyzed standard samples of three types of aluminum matrix certified reference materials (CRM) using GD-MS. Calibration curves were constructed for 13 elements (Mg, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Sn, and Pb), with the slope representing the relative sensitivity factor (RSF). The x- and y-axes of the calibration curve represented ion beam ratio (IBR) and the authenticated value of the standard sample, respectively. In order to evaluate precision and linearity of the calibration curve, RSD and the coefficient of determination were calculated. Curve RSD for every element reflected high precision (within 10 %). For most elements, the coefficient of determination was ${\geq}0.99$, indicating excellent linearity. However, vanadium, nickel, and gallium curves exhibited relatively low linearity (0.90~0.95), likely due to their narrow concentration ranges. Standard RSF was calculated using the slope of the curve generated for three types of CRM. Despite vanadium, nickel, and gallium exhibiting low coefficients of determination, their standard RSF resembled that of the three types of CRM. Therefore, the RSF method may be used for element quantitation. Standard iron matrix samples were analyzed to verify the applicability of the aluminum matrix standard RSF, as well as to calculate the RSD-estimated error of the measured value relative to the actual standard value. Six elements (Al, Si, V, Cr, Mn, and Ni) exhibited an RSD of approximately 30 %, while the RSD of Cu was 77 %. In general, Cu isotopes are subject to interference: $^{63}Cu$ to $^{54}Fe^{2+}-^{36}Ar$ and $^{65}Cu$ to $^{56}Fe-Al^{3+}$ interference. Thus, the influence of these impurities may have contributed to the high RSD value observed for Cu. To reliably identify copper, the resolution should be set at ${\geq}8000$. However, high resolutions are inappropriate for analyzing trace elements, as it lowers ion permeability. In conclusion, quantitation of even relatively low amounts of six elements (Al, Si, V, Cr, Mn, and Ni) is possible using this method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.4
• /
• pp.41-54
• /
• 2021

This study targets the urban park corresponding to the core areas (Hubs) of Green Infrastructure and estimates their value utilizing the Contingent Valuation Method (CVM) and determines the planning factors which affect them. The research aims to provide basic data for supporting the value improvement in the planning stage for urban parks representing green infrastructure. The primary purpose of this research is to derive variables that affect economic value and planning factors to improve the use-value of urban parks, one of the Hubs of the green infrastructure. In this study, Sejong Lake Park, located in Sejong City, is the target site. This study collected the responses of 105 people by conducting a survey on the intention to pay for the use-value and the planning factors that affect it, targeting visitors to Sejong Lake Park. The study conducts Contingent Valuation Method (CVM) on this survey responses. The results are as follows: first, as a result of analyzing the variables which affect willingness to pay for use-value, residence and age influence the willingness to pay significantly among socioeconomic characteristics. Next, the survey responses of Double-bounded dichotomous choices (DB-DC) CVM are converted into variables through statistic techniques. Furthermore, the variables are used for a Logit model to draw coefficients. The average willingness to pay per person for the use-value of Sejong Lake Park using the derived coefficients was approximately found to be 8,597 won. Therefore, as of 2019, Sejong Lake Park, with a total of 430,000 visitors, is estimated to have an annual economic value of 3.7 billion won. Third, the average Likert scale of the planning factor affecting the decision to pay for the economic value of Sejong Lake Park was the highest along the waterfront landscape, and the convenience facilities and waterfront landscape showed the highest willingness to pay, 10,000 won. In the range between 2,500 won and 5,000 won, the waterfront area ranks highest. Therefore, it can be said that visitors to Sejong Lake Park take account of the economic value of using the waterfront landscape the most. This study is meaningful as a thesis on use-value and the planning factors that affected value evaluation results of urban parks, and the analysis of the correlation between the planning factors of urban parks as hubs located in urban areas.

• Journal of Intelligence and Information Systems
• /
• v.27 no.4
• /
• pp.23-48
• /
• 2021

The Korean economy has achieved continuous economic growth for the past several decades thanks to the government's export strategy policy. This increase in exports is playing a leading role in driving Korea's economic growth by improving economic efficiency, creating jobs, and promoting technology development. Traditionally, the main factors affecting Korea's exports can be found from two perspectives: economic factors and industrial structural factors. First, economic factors are related to exchange rates and global economic fluctuations. The impact of the exchange rate on Korea's exports depends on the exchange rate level and exchange rate volatility. Global economic fluctuations affect global import demand, which is an absolute factor influencing Korea's exports. Second, industrial structural factors are unique characteristics that occur depending on industries or products, such as slow international division of labor, increased domestic substitution of certain imported goods by China, and changes in overseas production patterns of major export industries. Looking at the most recent studies related to global exchanges, several literatures show the importance of cultural aspects as well as economic and industrial structural factors. Therefore, this study attempted to develop a forecasting model by considering cultural factors along with economic and industrial structural factors in calculating the import volume of each country from Korea. In particular, this study approaches the influence of cultural factors on imports of Korean products from the perspective of PUSH-PULL framework. The PUSH dimension is a perspective that Korea develops and actively promotes its own brand and can be defined as the degree of interest in each country for Korean brands represented by K-POP, K-FOOD, and K-CULTURE. In addition, the PULL dimension is a perspective centered on the cultural and psychological characteristics of the people of each country. This can be defined as how much they are inclined to accept Korean Flow as each country's cultural code represented by the country's governance system, masculinity, risk avoidance, and short-term/long-term orientation. The unique feature of this study is that the proposed final prediction model can be selected based on Design Principles. The design principles we presented are as follows. 1) A model was developed to reflect interest in Korea and cultural characteristics through newly added data sources. 2) It was designed in a practical and convenient way so that the forecast value can be immediately recalled by inputting changes in economic factors, item code and country code. 3) In order to derive theoretically meaningful results, an algorithm was selected that can interpret the relationship between the input and the target variable. This study can suggest meaningful implications from the technical, economic and policy aspects, and is expected to make a meaningful contribution to the export support strategies of small and medium-sized enterprises by using the import forecasting model.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.11-18
• /
• 2021

A novel microwave dielectric composite material for ultra-low temperature co-fired ceramics (ULTCC) with (1-x)BaWO₄-xBaV₂O₆ (x=0.54~0.85) composition was prepared by firing a mixture of BaWO₄ and BaV₂O₆. Shrinkage tests showed that the ceramic composite begins to densify at a temperature as low as 550℃ and can be sintered at 650℃ with 98% of relative density under the influence of BaV₂O₆. X-ray diffraction analysis showed that BaWO₄ and BaV₂O₆ coexisted and no secondary phase was detected in the sintered bodies, implying good chemical compatibility between the two phases. Near-zero temperature coefficients of the resonant frequency (𝛕_f) could be achieved by controlling the relative content of the two phases, due to their positive and negative 𝛕_f values, respectively. With increasing BaV₂O₆ (x from 0.53 to 0.85), the 𝛕_f value of the composites increased from -7.54 to 14.49 ppm/℃, ε_r increased from 10.08 to 11.17 and the quality factor (Q×f value) decreased from 47,661 to 37,131 GHz. The best microwave dielectric properties were obtained for x=0.6 samples with ε_r=10.4, Q×f=44,090 GHz, and 𝛕_f=-2.38 ppm/℃. Chemical compatibility experiments showed the developed composites are compatible with aluminum electrode during co-firing process.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.955-964
• /
• 2022

According to the statistics of maritime accidents statistics that have occurred in Korea over the past five years, maritime accidents caused by fishing boats have increased every year from 1,646 in 2016 to 2,100 in 2020. In particular, of the 378 capsizing accidents that have occurred in the past five years, 252 capsizing accidents of fishing boats account for a high proportion of 66.7%, therefore, it is urgent to come up with countermeasures. In this study, to determine the cause of the capsizing accident of fishing boat No. 66 poongsung, data such as stability and seawater inflow routes were collected, and the effects of waterproof, additional wood decks, and windbreakers on stability on were quantitatively analyzed. Additional decks, windbreakers, and waterproof installed in No. 66 poongsung cause initial list, deteriorate stability, and fail to meet fishing boat structural standards. In addition, it was analyzed that the stability was weakened due to the characteristics of the hull shape of No. 66 poongsung. To estimate the stability at the time of the accident, the stability at the time of the working in the fishing ground condition, amount of seawater inflow according to the change in sea conditions, hull oscillation situation, and change in stability due to the hull factor were calculated. As a result, the minimum GoM was satisfied at the time of working in the fishing ground, but it could not be restored at the maximum wave height of 4 m, and the minimum GoM was not satisfied at the maximum wave height of 4 m owing to the influence of seawater inflow and oscillation due to the hull list. However, the minimum GoM was satisfied if additional decks and windbreakers installation was excluded among the factors affecting the stability of No. 66 poongsung.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.4
• /
• pp.1-15
• /
• 2019

Psy's Gangnam style in 2012 showed K-pop's potential for global growth and BTS proved it by reaching three consecutive Billboard No.1. The success in the global music market brings tremendous economical and cultural power. This study is conducted for the continuous growth of K-pop music in the global music market by analyzing the musical factor of K-pop's global success. The top 20 most-viewed K-pop MV on Youtube is chosen as a research subject because Youtube is a worldwide platform that reflects global popularity. For the process of K-pop music creation, the role of the composer is expanded and many overseas producers participate in music creation. All 20 songs are created by the collective creation system and there is a consecutive collaboration between the main producers and certain artists. The top 20 most viewed K-pop songs have the musical characteristics of transnational genre convergence, hook songs, sophisticated sounds, frequent use of English lyrics, a reflection of the latest global trends, rhythm optimized for dance and clear concept. It makes the K-pop song easily remembered and familiar to overseas listeners. K-pop's healthy and fresh theme brings emotional empathy and reflects Korean sentiments. K-pop's global success is not a coincidence, but a result of continuous efforts to advance overseas. Some critics criticize K-pop's musical style is similar and it shows K-pop's limitation but K-pop progressed its musical evolution. By keeping the merits of K-pop's success factors and complementing its weak points, K-pop will continue its popularity and increase influence in the global music market.

• 한국노년학
• /
• v.30 no.4
• /
• pp.1429-1444
• /
• 2010

The purpose of this study was to examine the impact of elderly people's difficulties in emotional regulation on their quality of life and to suggest possible ways of improving their emotional regulation. The subjects in this study were 345 senior citizens who participated in community education programs and used senior centers. A survey was conducted in person, and the instrument used to check their difficulties in emotional regulation was Gratz & Roemer(2004)'s inventory that was rearranged to serve the purpose of this study. When a factor analysis was carried out, their emotional regulation difficulties were categorized into five factors, which were respectively named troubles in emotional response handling, difficulties in accurate emotional awareness, difficulties in emotional coping, and difficulties in emotional reception. The findings of the study were as follows: First, the senior citizens were different from one another in emotional regulation difficulties according to their personal characteristics involving gender, income, financial state, hospitalization experience over the past three months, and presence or absence of disease. Second, their quality of life significantly varied with gender, age, presence or absence of spouse, form of residence, education, income, financial state, hospitalization experience and presence or absence of disease. Third, as a result of investigating the influence of their emotional regulation difficulties on the overall quality of life, a better quality of life was found among those who were male and who had an income and suffered from fewer diseases. And a lower quality of life was found among the senior citizens who faced difficulties in emotional response handling, who had difficulties in emotional control and who lagged behind in terms of emotional coping. Accordingly, the emotional regulation difficulties of the senior citizens could be said to be closely linked to their quality of life. Given the findings of the study, in which way elderly people could be helped to improve their emotional regulation in consideration of their own personal characteristics was discussed, and how to classify their emotional regulation difficulties from various angles to relieve them of the troubles was suggested.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.157-172
• /
• 2023

The recent Fourth Industrial Revolution is accelerating changes due to digital transformation. According to this trend, the existing start-up paradigm is changing, and new business models based on new technologies and creative ideas are emerging. In addition, the diversity of mentoring relationships and environments such as online mentoring, reverse mentoring, group mentoring, and multiple mentoring is also increasing. However, most mentors in their 50s and 60s, who are mainly active in the start-up field, have been able to help mentees a lot based on their own experience and expertise, but they are having difficulty responding to the changing environment due to a lack of understanding and experience of new technologies and environments. To cope with these changes well, mentors must constantly study, acquire and apply the latest technologies to improve their understanding of new technologies and the environment. In addition, it is necessary to have an understanding and respect for the diversity of mentoring relationships and environments, and to maximize the effectiveness of mentoring by actively utilizing them. Therefore, mentors should recognize that they directly affect the growth and development of mentees, constantly acquire new knowledge and skills to maintain and develop expertise, and actively deliver their knowledge and experiences to mentees. Therefore, in this study, was tried to empirically analyze the relationship between mentoring's influence on mentor's job satisfaction through mentor's personal learning and self-efficacy. The results of the empirical analysis were as follows. Among the functions of mentoring, career function and role modeling were found to have a positive effect on both personal learning and self-efficacy, which are parameters, and job satisfaction, which is a dependent variable. On the other hand, psychological and social functions have a positive effect on personal learning, but they do not have an effect on self-efficacy and job satisfaction. In addition, as a result of analyzing the mediating effect, all mediating effects were confirmed for career functions, and only the mediating effect of self-efficacy was confirmed for role modeling. Through this study, mentoring is an important factor in promoting job satisfaction, personal learning and self-efficacy, and this study can be said to be academically and practically meaningful in that it confirmed personal learning and self-efficacy as factors that increase mentor's job satisfaction, and the focus of mentoring research was shifted from mentee to mentor to study the impact of mentoring on mentors.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.2
• /
• pp.51-64
• /
• 2023

Background: This study was conducted to determine the association with dual jobbing on dental hygienists' job satisfaction and to identify the factors that lead to dual jobs. Methods: This study was an online survey of 110 currently employed dental hygienists conducted during the month of May 2022. To determine job satisfaction, we used the 20-item Korea-Minnesota Satisfaction Questionnaire (K-MSQ). Survey questions related to dual job were adapted and supplemented from the dual job survey instrument for dental hygienists to identify intention to dual job and future intention to dual job. Descriptive statistics, independent t-test, ANOVA and Scheffe's post hoc analysis, and multiple logistic regression were performed. Results: The dual job rate and future dual job rate of the participants in this study were about 27% and 47%, respectively. The means for Intrinsic job satisfaction, Extrinsic job satisfaction, and job satisfaction were 3.44, 3.15, and 3.36, respectively. It was statistically significant that extrinsic job satisfaction increased with increasing position, and intrinsic job satisfaction, extrinsic job satisfaction, and job satisfaction increased with increasing salary. Those currently working dual jobs cited "self-actualization" as a reason for doing so, and those who intended to work dual jobs in the future cited "not being paid enough in their primary job" as a reason. We found that a one-unit increase in intrinsic job satisfaction and job satisfaction increases the odds of future intention to dual job by about 1.07 and 1.05 times, respectively (p<0.05). Conclusion: This study confirmed the influence of dental hygienists' job satisfaction on intention to dual job and future intention to dual job, and self-actualization was found to be the main factor. Therefore, the consideration of dual jobs in the future will affect the improvement of dental hygienists as professionals and the reduction of turnover through better working conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.69 no.1
• /
• pp.49-60
• /
• 2024

A region can be divided into cultivation zones based on homogeneity in weather variables that have the greatest influence on crop growth and yield. This study classified the cultivation zone of soybean using weather indices as a prior study to classify the agroclimatic zone of soybean. Meteorological factors affecting soybeans were determined through correlation analysis over a 10 year period (from 2013 to 2022) using data from the Miryang and Suwon regions collected from the soybean yield trial database of the Rural Development Administration, Korea and the meteorological database of the Korea Meteorological Administration. The correlation between growth characteristics and the minimum temperature, daily temperature range, and precipitation were high during the vegetative growth stages. Moreover, the correlation between yield components and the maximum temperature, daily temperature range, and precipitation were high during the reproductive growth stages. As a result of k-means clustering, soybean cultivation zones were divided into three zones. Zone 1 was the central inland region and southern Gyeonggi-do; Zone 2 was the southern part of the west coast, the southern part of the east coast, and the South Sea; and Zone 3 included parts of eastern Gyeonggi-do, Gangwon-do, and areas with high altitudes. Zone 1, which has a wide latitude range, was further subdivided into three cultivation zones. The results of this study may provide useful information for estimating agrometeorological characteristics and predicting the success of soybean cultivation in South Korea.