• 한국해안·해양공학회논문집
• /
• 제29권6호
• /
• pp.369-381
• /
• 2017

쇄파역에서 흔히 관측되는 왜도된 비선형 파랑은 정현파에 비해 상대적으로 큰 관성력을 지녀 투과율에 미치는 영향이 상당할 것으로 추정되어왔다. 본고에서는 이러한 추론을 확인하기 위해 왜도가 1.02에서 1.032에 분포하는 총 여섯 개의 파랑을 대상으로 한 수치모의를 수행하였다. 수치모의는 OpenFoam 기반 Tool box인 ihFoam을 사용하여 수행하였으며, 왜도된 비선형 파랑은 경사가 1:30인 천퇴를 이용하여 유도하였다. 투수층에서의 유동은 Navier Stokes Eq.에 추가 항력을 도입하여 해석하였으며, 모의결과 왜도된 비선형 파랑은 정현파에 비해 큰 관성력으로 인해 상대적으로 큰 투과율을 지니는 것으로 모의되었다. 또한 Porous층에서의 Damping으로 인한 파속변화 여부를 살펴 보기위해 Damping이 반영된 천수방정식으로부터 분산관계식을 새로이 유도하였으며, 그 결과 투과성 방파제에서의 파형과 마찰력 사이의 위상차가 파속에 영향을 미치는 것으로 보인다.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1023-1042
• /
• 2016

Based on Hamilton's principle, the flexural vibration differential equations and boundary conditions of the steel-concrete composite beam (SCCB) with comprehensive consideration of the influences of the shear deformation, interface slip and longitudinal inertia of motion were derived. The analytical natural frequencies of flexural vibration were compared with available results previously observed by the experiments, the results calculated by the FE model and the other similar beam theories available in the open literatures. The comparison results showed that, the calculation results of the analytical and Timoshenko models had a good agreement with the results of the experimental test and FE model. Finally, the influences of shear deformation and interface slip on the flexural natural frequencies of the SCCB were discussed. The shear deformation effect increases with the increase of the mode orders of flexural natural vibration, and the flexural natural frequencies of the higher mode orders ignoring the influence of shear deformations effect would be overestimated. The interface slip effect decrease with the increase of the mode orders of flexural natural vibration, and the influence of the interface slip effect on flexural natural frequencies of the low mode orders is significant. The influence of the degree of shear connection on shear deformation effect is insignificant, and the low order modes of flexural natural vibration are mainly composed of the rotational displacement of cross sections.

• 디지털융복합연구
• /
• 제18권8호
• /
• pp.119-131
• /
• 2020

스타트업이 전통적 거대기업을 물리치는 역전현상의 원인으로, 기업가정신과 시장지향이 조직문화와 경영성과 관계에 미치는 매개효과를 살펴보는 것이 본 연구의 목적이다. Hayes(2013년)가 제안한 부트스트래핑의 연구방법을 통해 총효과, 직접효과, 간접효과 분석을 실시했다. 그 결과 조직문화와 경영성과 사이에는 직접적인 영향관계가 없었지만, 조직문화와 경영성과의 관계에서 기업가적 행동과 시장지향성을 모두 매개함으로써 경영성과에 긍정적인 영향을 미친다는 것을 확인했다. 본 연구는 기업가정신과 시장지향성 등 기존 이론과 연계하고 기업성과에 필요한 역량목표의 범위를 조직문화로 확대하였다는 점에서 의의가 있다. 기업은 경영성과와 가치창출을 위한 혁신지향적 조직문화를 창출하고 기업가적 행동과 시장지향성을 가지고 조직의 관성으로부터 문화를 개방할 필요가 있다.

• Structural Engineering and Mechanics
• /
• 제69권3호
• /
• pp.257-268
• /
• 2019

Infills are as important members in structural design as beams, columns and braces. They have significant effect on structural behavior. Because of lots of variables in infills like material non-linear behavior, the interaction between frames and infill, etc., the infills performance during an earthquake is complicated, so have led designers do not consider the effect of infills in designing the structure. However, the experimental studies revealed that the infills have the remarkable effect on structure behavior. As if these effects ignored, it might occur soft-story phenomena, torsion or short-column effects on the structures. One simple and appropriate method for considering the infills effects in analyzing, is replacing the infills with diagonal compression strut with the same performance of real infill, instead of designing the whole infill. Because of too many uncertainties, codes and researchers gave many expressions that were not as the same as the others. The major intent of this paper is calculation the width of this diagonal strut, which has the most characteristics of infill. This paper by comprehensive on different parameters like the modulus of young or moment of inertia of columns presents a new formula for achieving the equivalent strut width. In fact, this new formula is extracted from about 60 FEM analyses models. It can be said that this formula is very efficient and accurate in estimating the equivalent strut width, considering the large number of effective parameters relative to similar relationships provided by other researchers. In most cases, the results are so close to the values obtained by the FEM. In this formula, the effect of out of plane buckling is neglected and this formula is used just in steel structures. Also, the thickness of infill panel, and the lateral force applied to frame are constant. In addition, this new formula is just for modeling the lateral stiffness. Obtaining the nearest response in analyzing is important to the designers, so this new formula can help them to reach more accurate response among a lot of experimental equations proposed by researchers.

• Advances in materials Research
• /
• 제12권3호
• /
• pp.243-261
• /
• 2023

This study aims to analyze the mechanical buckling behavior of a single-walled carbon nanotube (SWCNT) integrated with a one-parameter elastic medium and modeled as a Kerr-type foundation under a longitudinal magnetic field. The structure is considered homogeneous and therefore modeled utilizing the nonlocal first shear deformation theory (NL-FSDT). This model targets thin and thick structures and considers the effect of the transverse shear deformation and small-scale effect. The Kerr model describes the elastic matrix, which takes into account the transverse shear strain and normal pressure. Using the nonlocal elastic theory and taking into account the Lorentz magnetic force acquired from Maxwell relations, the stability equation for buckling analysis of a simply supported SWCNT under a longitudinal magnetic field is obtained. Moreover, the mechanical buckling load behavior with respect to the impacts of the magnetic field and the elastic medium parameters considering the nonlocal parameter, the rotary inertia, and transverse shear deformation was examined and discussed. This study showed useful results that can be used for the design of nano-transistors that use the buckling properties of single-wall carbon nanotubes(CNTs) due to the creation of the magnetic field effect.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1244-1254
• /
• 1992

본 연구에서는 탄성, 점탄성 및 탄성박판으로 이루어진 복합적층구조물의 진 동특성을 해석함에 있어서 모재 및 구속재의 길이방향변위, 회전관성 그리고 전단변형 의 영향과 접착제의 법선 및 전단변형의 영향을 고려한 계의 운동방정식을 연립 1계 미분방정식의 형태로 유도하고 수치계산 결과를 실험과 비교하였다. 그리고 구속재 와 접착제의 두께변화에 따라서 접착제의 법선 및 전단변형이 계의 감쇠특성에 미치는 영향을 고찰하였다.

• 한국인터넷방송통신학회논문지
• /
• 제20권3호
• /
• pp.113-119
• /
• 2020

본 논문은 50m/s 태풍에 밭담이 안 무너지는 이유를 연돌효과(Stack Effect)의 순환(Circulation)에 의해 증명했고 이에 따른 봄, 여름, 가을, 겨울이 농작물과의 상관관계를 추적했다. 외담으로 쌓은 밭담은 밭에 쌓아놓으면 등속직선운동과 같은 관성을 가져 아무리 강하게 부는 바람에도 버텨 나가면서 윈드캐슬 3rd Layer 역할을 22,000km 걸쳐 해내는 Magic Wall이다. 밭담이 1.5미터, 오름은 밭담의 200배, 한라산은 밭담의 1,300배인 이유와 특성함수의 공진에 대해 분석했다. 본 논문은 자연 기후변화에 적응하여 밭담을 쌓아 계절 특성에 맞는 농사를 짓는 밭담의 높이, 중성대의 높이를 유도하고 자연지능 제어 관계를 설계했다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.788-792
• /
• 2003

Rotating machines are widely used in industrial world and especially motor and generator take up much part of it. As for this kind of motor and generator, electrical loss due to eddy current is the very important factor and that is also a primary factor causes heat generation. To solve this kind of problem like the above. insulated laminating silicon steel sheet is used to prevent eddy current effect. Laminated rotor is widely used as rotating shaft of motor and generator. Due to that, electrical loss and heat problem can be solved but designer meets another problem. In general. most of the motor and generator can be normally operated under 3,600 rpm because they are designed to have the first critical speed more than that speed. But nowadays, they should be operated more than the first critical speed as usual with the trend of high speed, large scale and high precision in industrial world. The critical speed can be determined from the inertia and stillness for the rotor and bearing of rotating systems. The laminated rotor stiffness can be hardly determined because it can be derived a lot factors for instance rotor material and shape, lamination material and shape, insulation material. lamination force and so on. In this paper, the change of the natural frequency of the motor was examined with the change of the lamination force as an experimental method and design criteria will be presented for motor & generator designer, who can apply the result of numerical analysis with equivalent diameter scheme with ease.

• 한국전산구조공학회논문집
• /
• 제14권3호
• /
• pp.371-379
• /
• 2001

이 논문은 연속성을 갖는 탄성지반 위에 놓인 곡선부재의 자유진동에 관한 연구이다. 연속성을 갖는 탄성지반을 Pasternak 지반으로 모형화하여 곡선부재의 자유진동을 지배하는 무차원 상미분방정식을 유도하였다. 상미분방정식에는 회전관성과 전단변형효과를 고려하였다. 곡선부재의 선형은 원호형, 포물선형, 정현형, 타원형의 4가지를 채택하였고, 단부조건으로는 회전-회전, 회전-고정, 고정-고정의 3가지를 채택하였다. 실험실 규모의 실험을 실시하고 본 연구의 결과와 비교하여 연구의 타당성을 검증하였다. 수치해석의 결과로 무차원 고유진동수와 곡선부재의 변수들 사이의 관계를 표 및 그림에 나타내었으며 진동형의 예를 그림에 나타내었다.

• Structural Engineering and Mechanics
• /
• 제42권4호
• /
• pp.531-549
• /
• 2012

Numerous oil tanker losses have been reported and one of the possible causes of such casualties is caused by the structural failure of aging ship hulls in rough weather. In aging ships, corrosion and fatigue cracks are the two most important factors affecting structural safety and integrity. This research is about effect on hull girder ultimate strength behavior of double hull oil tanker according to corrosion after Part I: stiffened panel. Based on corrosion data of Part I (time-dependent corrosion wastage model and CSR corrosion model), when progressing corrosion of fourtypes of double hull oil tankers (VLCC, Suezmax, Aframax, and Panamax), the ultimate strength behavior of hull girder is compared and analyzed. In case of the ultimate strength behavior of hull girder, when occurring corrosion, the result under vertical and horizontal bending moment is analyzed. The effect of time-dependent corrosion wastage on the ultimate hull girder strength as well as the area, section modulus, and moment of inertia are also studied. The result of this research will be useful data to evaluate ultimate hull girder strength of corroded double hull oil tanker.