• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1562-1572
• /
• 1996

The rigid-plastic finite element formulation including the inertia force is derived and then the rigid-plastic finite elemnt program considering the inertia effect is developed. In order to consider the strain hardening, strain rate hardening and thermal softening effects which are frequentrly observed in high-velocity deformation phenomena, the Johnson-Cook constitutive odel is applied. The developed program is used to simulate two high-velocity deformation problemss ; rod impact test and hdigh-velocity compression precess. As a result of rod impact test simulation, it is found that the siulated result has a good agreement with the experimental observation. Through the high-velocity compression process simulation. it is also found that the accuracy of the simulated results is dependent upon the time increment size and mesh size.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1815-1823
• /
• 2003

The vibrational system of this study consists of a cantilever pipe conveying fluid, the moving masses upon it and having an attached tip mass. The equation of motion is derived by using Lagrange's equation. The influences of the velocity and the inertia force of the moving mass and the velocities of fluid flow in the pipe have been studied on the dynamic behavior and the natural frequency of a cantilever pipe by numerical method. The deflection of the cantilever pipe conveying fluid is increased due to the tip mass and rotary Inertia. After the moving mass passed upon the cantilever pipe, the amplitude of pipe is influenced by energy variation when the moving mass fall from the cantilever pipe. As the moving mass increase, the frequency of the cantilever pipe conveying fluid is increased. The rotary inertia of the tip mass influences much on the higher frequencies and vibration mode.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.129-132
• /
• 2001

she purpose of this paper is to propose an approach to suppress the vibration of three-mass inertia system based on the LMI theory. and confirm its validity through simulations under the condition of parameter variation. First, the existing $H_{\infty}$ servo problem is modified to a structure to which the LMI theory can be applied by virtue of the interval model principle. By adopting this structure, we can divide given specifications fur the vibration suppression problem into $H_2$and $H_{\infty}$ performance criteria. The results of simulation for the three-mass inertia system show that the proposed design approach is quite effective.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.3-12
• /
• 1975

As for two dimensional added mass coefficients for straight framed hull forms in a free surface of an ideal fluid, theoretical calculations by F.M. Lewis, vertical, K. Wendel, J.H. Hwang, and etc. are available; vertical modes of rectangular and triangle sections by Lewis, vertical, horizontal and torsional models of rectangular and triangle section by Wendel, and systematical calculations for vertical modes of single chine forms by Hwang. In this paper, employing the conformal transformation by which a unit circle and its exterior region can conformally mapped to a polygon and its exterior region, the author calculated two dimensional added inertia coefficients systematically for straight framed sections with single chine in horizontal and torsional modes of vibrations. As the results, it was found that sloping side angle is an important factor measuring the magnitude of two dimensional added inertia coefficient for a set of given values of the sectional area coefficient and the beam-draft ratio. To grasp it cleary in physical sense, pressure distributions are investigated for some typical section contours. The numerical results are presented graphically in the form of two dimensional added sectional area coefficients with beam-draft ratios and sloping side angles as parameters, so that the data may conveniently utilized for estimation of the added inertia coefficients based on a three parameter technique.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.5
• /
• pp.467-477
• /
• 2004

A new scheme to estimate the moment of inertia in the servo motor drive system in very low speed is proposed in this paper. The typical speed estimation scheme in most servo system for low speed operation is sensitive to the variation of machine parameters, especially the moment of inertia. To estimate the motor inertia value, the observer using the Radial Basis Function Networks(RBFN) is applied. The effectiveness of the proposed inertia estimation method is verified by experiments. It is concluded that the speed control performance in the low speed region is improved with the proposed disturbance observer using RBFN.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.498-502
• /
• 2004

In a link-motion mechanism, numerous links are interconnected and each link executes a constrained motion at a high speed. Due to the complicated constrained motions of the constituent links, dynamic unbalance forces and moments are generated and transmitted to the main frame. Therefore unwanted vibration is produced. This degrades productivity and precise work. Based on constrained multi-body dynamics, the kinematic analysis is carried out to enable design changes to be made. This will provide the fundamental information for significantly reducing dynamic unbalance forces and moments which are transmitted to the main frame. In this work, a link-motion punch press is selected as an example of a link-motion mechanism. To calculate the mass and inertia properties of every link comprising a link-motion punch press, 3-dimensional CAD software is utilized. The main issue in this work is to eliminate the first-order unbalance force and moment in a link-motion punch press. The mass, moment of inertia link length, location of the mass center in each link have a great impact on the degree of dynamic balancing which can be achieved maximally. Achieving good dynamic balancing in a link motion punch press is quite essential fur reliable operation at high speed.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.6
• /
• pp.238-246
• /
• 2023

This paper proposes an effective inertia coefficient (EIC) in the Morison equation for better wave-force calculations. The OC4 semi-submersible floating offshore wind turbine (FOWT) platform was considered to test the feasibility. Large diffraction at large Keulegan-Carpenter (KC) numbers and the interaction between columns can result in errors in estimating the wave force using the Morison equation with a theoretical inertia coefficient, which can be corrected by the EIC as a function of the wave period and direction. The horizontal and vertical wave forces were calculated using the Morison equation and potential theory at each column, wave period, and wave direction. The EICs of each column were then obtained, resulting in a minimal difference between the Morison inertia force and the wave excitation force by the potential theory. The EICs, wave forces, phase angles, and dynamic motions were compared to confirm the feasibility of an EIC concept under regular and random waves.

• Knowledge Management Research
• /
• v.14 no.1
• /
• pp.73-94
• /
• 2013

Customer's purchase state consists of purchase inertia and variety-seeking. As the growing brand familiarity triggers the increase of brand attractiveness, customers purchase state will be of inertia. However the excessively growing brand familiarity ignites the decrease of brand attractiveness. Followingly the purchase state will be tend to plunge into the variety-seeking state. The main topic of this study is to validate the asymmetric formation of customer's purchase states between inertia and variety-seeking. In order to follow up the main topic, this article introduces a model to freely describe the velocity of value changes depending upon the purchase states. This model will help overcome the limitation of the past studies having been based on the symmetric value changes. Based on this approach marketer will be able to decide the timing of sales promotions. This research utilized local telecommunication carrier's database of smartphone application purchase/download records. This database was collected from two years (2009 and 2010) span, the time when the smartphones started commodifying in Korea whilst most of the past studies had used purchase data of maturity stage products. From this approach utilizing the introduction stage data in the product life cycle, the probability of brand choice depending upon the purchase state on the early-stage can be probed. Moreover, this study tries to expand the research methodology from the other areas of research by knowledge sharing. Here this study introduces the methodology of section-aggregated multinomial logit to simultaneously estimate the parameters that were included in the plural multinomial logit functions while the plural functions were inter-connected. This adoption of section-aggregated multinomial logit model procedures from the computerized statistics areas is expected to nourish the marketing research for more precise analysis and estimation of effects of marketing activities.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.891-898
• /
• 2005

Inertia welding is a solid-state welding process in which butt welds in materials are made in bar and in ring form at the joint race, and energy required lot welding is obtained from a rotating flywheel. The stored energy is converted to frictional heat at the interface under axial load. The quality of the welded joint depends on many parameters, including axial force, initial revolution speed and energy amount of upset. working time, and residual stresses in the joint. Inertia welding was conducted to make the large exhaust valve spindle for low speed marine diesel engine. superalloy Nimonic 80A for valve head of 540mm and high alloy SNCrW for valve stem of 115mm. Due to different material characteristics such as, thermal conductivity and flow stress. on the two sides of the weld interface, modeling is crucial in determining the optimal weld geometry and Parameters. FE simulation was performed by the commercial code DEFORM-2D. A good agreement between the Predicted and actual welded shape is observed. It is expected that modeling will significantly reduce the number of experimental trials needed to determine the weld parameters. especially for welds for which are very expensive materials or large shaft. Many kinds of tests, including macro and microstructure observation, chemical composition tensile , hardness and fatigue test , are conducted to evaluate the qualify of welded joints. Based on the results of the tests it can be concluded that the inertia welding joints of the superalloy exhaust valve spindle are better properties than the material specification of SNCrW.

• Journal of the Korean association of regional geographers
• /
• v.12 no.5
• /
• pp.571-582
• /
• 2006

This study look into a role change and geographical inertia of the central place. The place is selected and progressed as the center which is the joining of physical condition and social situation of the region. The central place is the role change according to social change but it has geographical inertia as the central place. The result is as follows. Firstly, the role of regional center is changed. This sample region is the center of a national defense and administration and traffic in Three-Country period. But the role of the national defense is disappeared with the unity of the three countries. A traffic center facility was lost because of traffic axis changed from the east-west line to the north-south line when Ko-Ryo period. A facility loss as a traffic center leads to diminish the administration function and the movement of the regional center within that area. Secondary. the new regional center function was maintained by the joining of an outside and inside peoples. It maintained the geographical inertia by Confucianism culture instead of administration function. Thirdly, it had geographical location movement within the area.