• 자원리싸이클링
• /
• 제3권3호
• /
• pp.27-31
• /
• 1994

포항제철소에서 발생되는 석회석슬러지의 유효이용의 일환으로 포틀랜드 시멘트 혼합재로서 첨가반응효과에 대한 연구를 행하였다. 즉 포틀랜드 시멘트-석회석슬러지계 경화체에 관하여 수화반응속도, 비증발 수분량, 압축강도등의 실험을 통해 포틀랜드 시멘트-석히석 슬러지계에서의 슬러지 미분말 첨가반응효과에 대하여 실험을 하였다. 석회석슬러지를 10% 첨가한 계에서는 포틀랜드 시멘트 단독의 경우와 별차이가 없으나 5% 첨가계에서는 수화 반응속도가 크게 나타났으며 이는 석회석슬러지의 미분말 효과의 영향으로 사료된다. 한편 경화 시멘트 페이스트의 압축강도는 석회석슬러지 5% 첨가한 계에서 약간 높게 나타났으며 물성도 좋게 나타났다. 수화반응물은 주로 $Ca(OH)_2$와 칼슘실리케이트 수화물이며 석회석슬러지를 첨가한 계의 28일 시료에서는 calcium carbonate hydrate가 생성되었다.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.168-174
• /
• 2005

Nowadays, the companies use polymer materials for many purposes fur they have many advantages. The costs of these materials take up too high a proportion of the overall cost of products that use these materials as their major material. It is advantage for polymer industries to reduce these costs. The microcellular foaming process was developed in the early 1980s to solve this problem and proved to be quite successful. Microcellular foaming process uses inert gases such as $CO_2,\;N_2$. As these gases solve into polymer matrices, many properties are changed. The microcellular foaming process makes the glass transition temperature of polymers to low, and diminish the residual stress of polymer matrices. Besides, the microcellular foaming process has several merits, impact strength elevation, thermal insulation, noise insulation, and raw material saving etc. In previous research, many facts of microcellular foaming process are founded its characteristics. But previous researcher found the characteristics of microcellular foaming process with pure gas, for example $CO_2,\;N_2$ and so on, they did not found the characteristics of microcellular foaming process with one more gases. If one more gases inlet the resin, the characteristics of microcellular foaming process is changed very amazingly. In this paper, discuss on the characteristics of microcellular foaming process wi th gas cocktail about cell morphology.

• 자원리싸이클링
• /
• 제30권4호
• /
• pp.46-53
• /
• 2021

바이오매스는 자연에서 얻어진 화학적 에너지로 활용할 수 있으며 곡물, 식물, 동물과 미생물 등의 모든 유기체를 말한다. 별도의 처리과정을 거치지 않아도 재생 및 재활용이 가능하여 친환경적이며 주변에서 쉽게 얻을 수 있다는 이점이 있다. 한편, 바이오매스는 열분해 또는 발효 과정을 거쳐 바이오에너지 연료로 활용할 수 있다. 따라서 화석 연료의 고갈과 환경 영향 등의 문제 해결을 위한 대체 에너지 중 하나로 평가되고 있다. 본 연구에서는 바이오매스의 반탄화 처리가 가능한 523~573K의 온도 및 불활성 분위기 조건에서 다양한 바이오매스(톱밥, 볏짚, 쌀겨, 커피박, 폐목재) 내 탄소 함량을 높이는 공정을 진행하였다. 그리고, 반탄화한 바이오매스를 탄소 농도, 연소 거동 등을 조사하여 철강 산업 등에 활용할 수 있는 고체 연료로서의 가능성을 검토하였다.

• Advances in concrete construction
• /
• 제13권1호
• /
• pp.71-81
• /
• 2022

Aluminosilicate materials as precursors are heterogenous in nature, consisting of inert and partially reactive portion, and have varying proportions depending upon source materials. It is essential to assess the reactivity of precursor prior to synthesize geopolymers. Moreover, reactivity may act as decisive factor for setting molar concentration of NaOH, curing temperature and setting proportion of different precursors. In this experimental work, the reactivities of two precursors, low calcium (fly ash (FA)) and high calcium (ground granulated blast furnace slag (GGBS)), were assessed through the dissolution of aluminosilicate at (i) three molar concentrations (8, 12, and 16 M) of NaOH solution, (ii) 6 to 24 h dissolution time, and (iii) 20-100℃. Based on paratermeters influencing the reactivity, different proportions of ternary binders (two precursors and ordinary cement) were activated by the combined NaOH and Na2SiO3 solutions with two alkaline activators to precursor ratios, to synthesize the geopolymer. Reactivity results revealed that GGBS was 20-30% more reactive than FA at 20℃, at all three molar concentrations, but its reactivity decreased by 32-46% with increasing temperature due to the high calcium content. Setting time of geopolymer paste was reduced by adding GGBS due to its fast reactivity. Both GGBS and cement promoted the formation of all types of gels (i.e., C-S-H, C-A-S-H, and N-A-S-H). As a result, it was found that a specified mixing proportion could be used to improve the compressive strength over 30 MPa at both the ambient and hot curing conditions.

• 한국재료학회지
• /
• 제32권5호
• /
• pp.270-279
• /
• 2022

In this study, N/S co-doped carbon felt (N/S-CF) was prepared and characterized as an electrode material for electric double-layer capacitors (EDLCs). A commercial carbon felt (CF) was immersed in an aqueous solution of thiourea and then thermally treated at 800 ℃ under an inert atmosphere. The prepared N/S-CF showed a large specific surface area with hierarchical pore structures. The electrochemical performance of the N/S-CF-based electrode was evaluated using both 3-electrode and 2-electrode systems. In the 3-electrode system, the N/S-CF-based electrode showed a good specific capacitance of 177 F/g at 1 A/g and a good rate capability of 41% at 20 A/g. In the 2-electrode system (symmetric capacitor), the freestanding N/S-CF-based electrode showed a specific capacitance of 275 mF/cm² at 2 mA/cm², a rate capability of 62.5 % at 100 mA/cm², a specific power density of ~ 25,000 mW/cm² at an energy density of 23.9 mWh/cm², and a cycling stability of ~ 100 % at 100 mA/cm² after 20,000 cycles. These results indicate the N/S co-doped carbon felts can be a promising candidate as a new electrode material in a symmetric capacitor.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.231-235
• /
• 2020

Industrialization and modern developments have led to an influx of toxic heavy metals into the aquatic environment, and the accumulation of heavy metals has serious adverse effects on humans. Among the various heavy metal treatment methods, adsorption is very useful and frequently used. Plastic materials, such as polypropylene and polyethylene, have been widely used as filter media due to their mechanical and chemical stability. However, the surface of plastic material is inert and therefore the adsorption capability of heavy metals is very limited. In this study, granular media and fiber media composed of polypropylene and polyethylene are used, and the surface modification was conducted in order to increase adsorption capability toward heavy metals. Oxygen plasma generated hydroxyl groups on the surface of the media to activate the surface, and then acrylic acid was synthesized on the surface. The grafted carboxyl group was confirmed by FT-IR and SEM. Heavy metal adsorption capability of pristine and surface modified adsorbents was also evaluated. Overall, heavy metal adsorption capability was increased by surface modification due to electrostatic interaction between the carboxyl groups and heavy metal ions. Fibrous PP/PE showed lower improvement compared to granular PP media because pore blockage occurred by the surface modification step, thereby inhibiting mass transfer.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.1-8
• /
• 2001

All objects emit thermal radiation and this radiation is the basis of the techniques used to detect flames. The usual phenomena occurring in the initial stage of the fire are generally invisible products of a combustion and visible smoke. Liquid or gaseous materials do not undergo a smoldering stage so that fires develop very rapidly. Also, the heat generated by the initial flames is usually not sufficient to activate a heat detector. In this case the most effective criterion for automatic fire detection is the flame. According to the fire regulation of korea, the compulsory standard provided that a flame detector shall be installed in a place that the attachment height of detector is higher than 20 m, chemical plants, hangar, refinery, etc.. The results of the research and development are discriminated between a flame and other radiant emitters, developed a UV detector tube contains an inert gas which absorbs UV radiation, developed PZT pyroelectric element is based on the use of photovoltanic cell, developed IR band-pass filter that only allow a 4.3 $\mu\textrm{m}$ radiation wavelength to reach the sensors and developed UV-IR combination flame detector combined into a single detection device.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.123-130
• /
• 2013

Zirconia is well known in industrial applications for its mechanical characteristics. DLC (diamond-like carbon) have high elastic modulus, high electric resistivity, high dielectric constant, high wear resistance, low friction coefficient, bio compatibility, chemically inert and thermally stable. Because of all these physical and chemical properties these types of coatings have become key procedure for thin coating. Friction coefficient of DLC films is already evaluated and the current work is a further advancement by calculating the fracture toughness and wear resistance of these coatings. In the present study DLC thin film coatings are developed on $ZrO_2$ alloy surface using Plasma Enhanced Chemical Vapor Deposition (PECVD) method. Vicker hardness test is employed and it was concluded that, DLC coatings increase the Vickers hardness of ceramics.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.30-33
• /
• 2017

In this study, the mold technology for manufacturing of porous implant was investigated. Firstly, we considered the concept of insert molding technology with 3D printing of porous inert part. The part on implant was designed in the end region of the implant. And then main implant bodies were manufactured using conventional machining method. The other porous parts were designed and optimized with molding simulation. As the feature size of porous implant was so small that perfect feature of it using 3D printing technology could not be obtained. So, we proposed another scheme for manufacturing of the porous implant in the replace of the former approach. Polymer mold cores with 3D printing technology were considered. The effects of addictive manufacturing process parameters on the properties of mechanical and dimensional accuracy were investigated. Direct 3D printed polymer mold cores were designed and manufactured under the simulation of thermal and molding analysis. It was shown that 3D printed mold core with polymer could be adapted to the injection molding for porous implant.

• 한국가스학회지
• /
• 제18권6호
• /
• pp.21-26
• /
• 2014

연료의 사용으로 인한 이산화탄소의 발생량을 줄일 수 있는 방법으로 바이오가스 또는 매립가스와 같은 신재생 가스 연료를 사용하는 방법이 도움이 될 수 있다. 그러나 다량의 불활성가스가 포함되어 있기 때문에 저발열량 및 연료 조성의 불균일함은 신재생 가스 연료를 발전용 엔진에 적용하는 경우, 엔진 성능에 큰 영향을 미칠 수 있기 때문에 이에 대한 연구가 필요하다. 본 연구에서는 신재생가스연료에 불활성가스가 엔진 연소가 불안정한 정도로 많이 포함된 경우에 수소 연료를 첨가함으로써 연소 안정성을 개선할 수 있음을 확인하고, 엔진의 열효율 및 배기 특성과 같은 성능 변화에 대하여 살펴보았다. 또한 같은 조건에서 엔진 효율 및 배기 성능을 향상시키기 위한 방안으로 길이가 긴 전극을 갖는 스파크 플러그를 적용하여 효과가 있음을 확인하였다.