Characterization of Fracture Toughness and Wear Behavior for Plasma Ceramic Coated Materials
![]() |
Ha, Sun-Ho
(Department of Mechanical Engineering, Changwon National University)
Lee, Dong-Woo (Department of Mechanical Engineering, Changwon National University) Rehman, Atta Ur (Department of Mechanical Engineering, Changwon National University) Wasy, Abdul (Department of Mechanical Engineering, Changwon National University) Song, Jung-Il (Department of Mechanical Engineering, Changwon National University) |
1 | X. Li, B. Bhushan, "Micro/nanomechanical and tribological characterization of ultra-thin amorphous carbon coatings", Journal of MATERIALS RESEARCH, Vol. 14, pp. 2328-2337, 1999. DOI |
2 | B. Bhushan, "Nanomechanical properties of solid surface and thin flms, in: B. Bhushan (Ed.), Handbook of Micro/Nanotribology", CRC Press, Boca Raton, Florida, 2nd ed, pp. 433-524, 1999. |
3 | B.K. Gupta, B. Bhushan, "Mechanical and tribologycal properties of hard carbon coatings for magnetic recording heads", Wear, Vol. 190, pp. 110-122, 1995. |
4 |
J. Kopecki1 et al, "Plasma Spraying Technique For The Deposition Of a-Si/ |
5 | W. Meidong, L. Shaw, "Effects of the powder manufacturing method on microstructure and wear performance of plasma sprayed alumina-titania coatings." Journal Surface & Coatings Technology. 202, pp. 34-44, 2007. DOI |
6 |
K. Tsukuma, M. Shimada, "Strength, fracture toughness and Vickers hardness of |
7 | G.R. Anstis, P. Chantikul, B.R. Lawn, D.B.A. Marshall, "A critical evaluation of indentation techniques for measuring fracture toughness", Journal of the American Ceramic Society. 64, pp. 533-538, 1981. DOI |
8 | S. Pathak, S.R. Kalidindi, B. Moser, C. Klemenz, N. Orlovskaya, "Analyzing Indentation Behavior of LaGaO3 Single Crystals using Sharp Indenters.", Journal of the European Ceramic Society. 28, pp. 2039-2047, 2008. DOI |
9 | K.M. Liang, R. Torrecillas, G. Orange, G. Fantozzi, "Determination of KISCC by indentation in ceramics", Journal of Materials Science. 25, pp.5077-5080, 1990. DOI |
10 | R. Smith, G.E. Sandland, "An Accurate Method of Determining the Hardness of Metals, with Particular Reference to Those of a High Degree of Hardness", Proceedings of the Institution of Mechanical Engineers, Vol. I, pp. 623-641, 1922. |
11 | H. J. Hucek, "Structural alloys handbook", 1985. |
![]() |