• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.172-175
• /
• 2001

The high temperature deformation behavior of two-phase gamma TiAl alloy has been investigated with the variation of temperature and ${\gamma}/{\alpha}_2$ volume fraction. For this purpose, a series of load relaxation tests and tensile tests have been conducted at temperature ranging from 800 to $1050^{\circ}C$. In the early stage of the deformation as in the load relaxation test experimental flow curves of the fine-grained TiAl alloy are well fitted with the combined curves of two processes (grain matrix deformation and dislocation climb) in the inelastic deformation theory. The evidence of grain boundary sliding has not been observed at this stage. However, when the amount of deformation is large (${\epsilon}{\approx}$ 0.8), flow curves significantly changes its shape indicating that grain boundary sliding also operates at this stage, which has been attributed to the occurrence of dynamic recrystallization during the deformation. With the increase in the volume fraction of ${\alpha}_2$-phase, the flow stress for grain matrix deformation increases since ${\alpha}_2$-Phase is considered as hard phase acting as barrier for dislocation movement. It is considered that cavity initiation is more probable to occur at ${\alpha}_2/{\gamma}$ interface rather than at ${\gamma}/{\gamma}$ interface.

• 한국전산구조공학회논문집
• /
• 제16권4호
• /
• pp.377-386
• /
• 2003

본 논문에서는 단순화 다자유도 모델링 방법을 이용하여 유연한 지붕을 갖는 l/2 축소 단층 보강조적조 건물의 지진 거동을 분석하였다. 선형 및 비선형 해석에 의한 결과들은 l/2 축소모형 단층 건물의 진동대 실험결과와 비교ㆍ분석되었다. 정확한 면내 및 면외 강성과 강도를 산정할 적절한 방법이 없기 때문에 구조모델 보정방법을 적용하여 반복적인 비교 ·분석 과정에서 각 부재의 강성과 강도변화에 따른 민감도를 평가하였다. 보정된 구조물의 특성을 사용하여 구조 재해석을 수행하였으며, 지붕구조물의 유연성이 전체 건물의 동적 거동에 미치는 영향을 분석하였다. 유연한 지붕은 전단벽의 면외 강성과 강도에 많은 영향을 미치게 되며, 강체 지붕과는 확연히 구분되는 동적 거동을 보여주었다.

• 한국전산구조공학회논문집
• /
• 제21권5호
• /
• pp.475-482
• /
• 2008

본 논문은 로터 시스템의 디스크 회전운동을 표현하는데 있어 운동방정식을 통합하는 과정에서 기존 연구자들이 채택한 오일러 각 사용법이 일관성이 없음을 지적하였다. 기존 연구자들은 오일러 각 순서가 달라서 속도와 운동에너지도 달리 산정하였음은 물론, 운동방정식은 오직 선형 시스템만 취급해 왔다 이러한 오일러 각 사용법의 단점을 극복하기 위하여 회전운동을 더욱 단순하게 매개화할 수 있는 4원법(quaternion)과 구 좌표계를 적용하여 비선형 시스템을 도출하였다. 이를 바탕으로 수치해석을 통하여 기존 방법과 비교하여 제안한 방법의 신뢰성과 우수성을 보였다.

• Earthquakes and Structures
• /
• 제6권5호
• /
• pp.561-580
• /
• 2014

After strong earthquakes conventional frames used worldwide in multi - story steel buildings (e.g. moment resisting frames) are not well positioned according to reparability. Two innovative systems for seismic resistant steel frames incorporated with dissipative fuses were developed within the European Research Program "FUSEIS" (Vayas et al. 2013). The first, FUSEIS1, resembles a vertical Vierendeel beam and is composed of two closely spaced strong columns rigidly connected to multiple beams. In the second system, FUSEIS2, a discontinuity is introduced in the composite beams of a moment resisting frame and the dissipative devices are steel plates connecting the two parts. The FUSEIS system is able to dissipate energy by means of inelastic deformations in the fuses and combines ductility and architectural transparency with stiffness. In case of strong earthquakes damage concentrates only in the fuses which behave as self-centering systems able to return the structure to its initial undeformed shape. Repair work after such an event is limited only to replacing the fuses. Experimental and numerical investigations were performed to study the response of the fuses system. Code relevant design rules for the seismic design of frames with dissipative FUSEIS and practical recommendations on the selection of the appropriate fuses as a function of the most important parameters and member verifications have been formulated and are included in a Design Guide. This article presents the design and performance of building frames with FUSEIS 1-1 based on models calibrated on the experimental results.

• 한국지진공학회논문집
• /
• 제10권3호
• /
• pp.77-84
• /
• 2006

비보강 조적조는 비균일 재료로 이루어진 합성재료에 가까우므로 그 거동이 하중종류와 구조물의 손상 정도에 따라서 매우 달라지게 된다. 본 연구에서는 여러 차례의 모의 지진을 받는 구조물의 손상거동이 어떻게 전개되어 가는지 살펴보는 간단한 방법을 제시한다. 특히, 시간영역 자료를 여러 구간으로 나누어서 주파수가 어떻게 변화해 가는지 살펴보는 부분 FFT방법을 이용하였다. 또한, 주파수와 강도와의 관계식을 이용하여 단자유도계의 이선형모델도 유도하였다. 본 연구에서 제시하는 이러한 방법들을 이용하여 비보강 조적조의 비탄성 성질들을 합리적으로 구할 수 있었다.

• 한국지진공학회논문집
• /
• 제15권1호
• /
• pp.19-28
• /
• 2011

이 연구에서는 손상된 철근콘크리트 구조물의 구조성능평가를 위한 비선형 유한요소해석 기법을 제시하였다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 재료적 비선형성에 대해서는 균열콘크리트에 대한 인장, 압축, 전단모델과 콘크리트 속에 있는 철근모델을 조합하여 고려하였다. 그리고 철근콘크리트 구조물의 비탄성거동의 예측에 근거한 손상지수를 제시하였다. 이 연구에서는 손상된 철근콘크리트 구조물의 구조성능을 파악하기 위해 제안한 해석기법을 신뢰성 있는 연구자의 실험결과와 비교하여 그 타당성을 검증하였다.

• 한국지진공학회논문집
• /
• 제17권2호
• /
• pp.89-95
• /
• 2013

Structures in a nuclear power system are designed to be elastic even under an earthquake excitation. However a structural component such as an isolator shows inelastic behavior inherently. For the seismic assessment of nonlinear structures, response history analysis should be performed. In this study, the response of base isolation system was analyzed by response history analysis for the seismic performance assessment. Firstly, several seismic assessment criteria for a nuclear power plant structure were reviewed for the nonlinear response history analysis. Based on these criteria, the spectrum matched ground motion generation method modifying a seed earthquake ground motion time history was adjusted. Using these spectrum matched accelerograms, the distribution of displacement responses of the simplified base isolation system was evaluated. The resulting seismic responses excited by the modified ground motion time histories and the synthesized time history generated by stochastic approach were compared. And the response analysis of the base isolation system considering the different intensities in each orthogonal direction was performed.

• 한국지진공학회논문집
• /
• 제17권4호
• /
• pp.159-169
• /
• 2013

The purpose of this study is to investigate the inelastic behavior of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction and to provide the details and reference data. Among the numerous parameters, this study concentrates on the shape of the section, the reinforcement details, the diameter of the transverse reinforcement and loading types. Eighteen column section specimens were tested under quasi-static monotonic loading. In this study, the computer program RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology) was used. A modified lateral confining effect model was adopted for the hollow bridge column sections. This study documents the testing of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction and presents conclusions based on the experimental and analytical findings.

• 한국공간구조학회논문집
• /
• 제18권1호
• /
• pp.127-134
• /
• 2018

This study suggests the tangent modulus $E_t$ associated with partially yielded section of steel member under axially compressed. The provisions for column strength does not provide a information about failure mode of structural system. So, designers can not evaluate that a failure comes from member buckling or material yielding. The material of the axially compressed column under inelastic behavior reaches yielding point before the axial force renders the column bent. If axial members yields not by buckling effect but gradually yielding effect of material, the design code should accept related tangent modulus Et which is based on gradual yielding effect of material. This study provides the new effective tangent modulus $E_t$ derived in the case that residual stress is 30 percent and 50 percent of yielding stress respectively. The study considers idealized I section of steel which ignores web and general I section of steel with web respectively and makes conclude that tangent modulus $E_t$ with idealized I section of steel is rational.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권1호
• /
• pp.101-115
• /
• 2013

This paper examines the application of structural reliability analysis to submarine pressure hulls to clarify the merits of probabilistic approach in respect thereof. Ultimate strength prediction methods which take the inelastic behavior of ring-stiffened cylindrical shells and hemi-spherical shells into account are reviewed. The modeling uncertainties in terms of bias and coefficient of variation for failure prediction methods in current design guidelines are defined by evaluating the compiled experimental data. A simple ultimate strength formulation for ring-stiffened cylinders taking into account the interaction between local and global failure modes and an ultimate strength formula for hemispherical shells which have better accuracy and reliability than current design codes are taken as basis for reliability analysis. The effects of randomness of geometrical and material properties on failure are assessed by a prelimnary study on reference models. By evaluation of sensitivity factors important variables are determined and comparesons are made with conclusions of previous reliability studies.