• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.317-331
• /
• 2023

Objectives: Construction workers are exposed to various hazardous substances simultaneously. However, little is known about the exposure hazards in construction industry. This study was aimed at identifying the risk of exposure hazards among construction workers. Methods: The expert survey (n=29) was conducted, including construction industry health managers (n=11) and work environment monitoring experts (n=18), on exposure probability, intensity and risk of hazardous substances by construction occupations Results: The exposure hazards of 30 construction occupations were identified and summarized through a literature review and expert survey. The most prevalent hazards were in order of noise, awkward posture, heat/cold, crystalline silica, cement/concrete dust, metal fumes, and volatile organic compounds. The hazards with highest risk score(over seven points) at construction occupations were noise(formwork carpenter, concrete finisher, rebar worker, demolition worker, driller/rock blaster), hazardous rays(welder), heat/cold (earthworks, formwork carpenter, rebar worker, concrete placer, scaffolder), awkward posture(bricklayer, caulker/tile setter, rebar worker) and heavy lifting(bricklayer, rebar worker). Among construction workers, the job types with the highest risk of exposure to carcinogens, and in which occupational cancer has been reported, were in order of stonemason, concrete finisher, rock blaster, welder, insulation installer, painter, scaffolder, plant worker and earthworks in order Conclusions: Systematic research and discussion on occupational disease among construction workers and its various hazardous factors are needed to establish job exposure matrix for facilitating standard for promptly processing the workers' compensation.

• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.867-878
• /
• 2003

The purpose of this study is to provide basic data for improvement in worker's uniform in both scientific and efficient ways. To make this procedure right, we brought the focus of the study into the present condition of working uniform in various machinery plants. The study was enforced by questionnaire and personal interview. The subjects of the survey were the 264 workers working in mechanical industry in Seoul. The results obtained from the researches by methods above are as follows. The level of satisfaction, on the whole, with their uniforms failed to reach the average level with the result of 2.97. The reason would be they have not been very contented with colors and materials. The level of satisfaction of color was only 2.76, far less reaching the average score 3. In detail, they complained color is dull, dark, too much solid and outdated. Surprisingly, the level of satisfaction with materials turned out to be really low as the materials used get dirty easily, doesn't draw moisture away from the skin quickly transport to surface making wearer more comfortable and doesn't have plenty of air moving out. According to statistics of population, the level of satisfaction of uniform on the whole differed from the point of age, gender, categories of industry, one's professional experience and income level.

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.20-25
• /
• 2015

It is predicted the mass retirement of the post-war generation and the lack of young people according to reduces the recruitment. Therefore, industry fields are concerned by the low level of occupational safety and health from issued problem in a variety of industries; the charge of expanding business range/multi-functional, black box of technology, difficulty of systematic training, relative decrease in the skill of workers, loss of know-how in the field of information followed restricted site information. In response to these problems, it is necessary to establish the long-termly and actively based on for the adoption of a safety and health management techniques utilizing IT, which is digital assistant(tablet PC, PDA, etc.), RFID/USN/ICT, database systems, and etc. In this study, we developed and evaluated a worker's safety sensing apparatus using smart phone. The apparatus may be useful to prevent accidents in the construction industry as well as confined space work.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.2
• /
• pp.23-29
• /
• 2020

Korea's elevator industry is one of the world's eighth-largest industrial sectors and the third largest in the world by new installations. This year, the number of elevators has exceeded 700,000, and the number of new installations is 30,000-40,000 every year. However, the news of elevator-related accidents is reported continuously through the media and the accident rate is not decreasing. In particular, among the recent accidents related to elevators, accidents related to elevator workers are increasing, causing social problems. This year, the National Assembly's Environmental Labor Relations Commission's National Auditors lost five lives a year and 12 elevator workers were killed in fall and stenosis accidents during the installation, maintenance and replacement of the elevators for about two years since 2018. It took place to adopt the representatives of four domestic elevator companies as witnesses. An elevator worker is a collective term for workers involved in the design, manufacturing, installation, replacement, maintenance, inspection, management, and supervision related to the elevator industry, and the related accidents are called elevator worker accidents. Analysis of elevator-related accidents in the past has shown that the fault of the user accounted for 70% of the total, and the fault of the worker accounted for about 2.5%, and the accident occurred to the user or the user due to carelessness of the worker during the lift-related work. Currently, elevator-related accidents are reported by the Korea Elevator Safety Agency under Article 48 of the Elevator Safety Management Act under the Ministry of Interior and Safety. If deemed necessary for the prevention and prevention of recurrence of an elevator accident, the cause and condition of the elevator accident may be investigated. However, the current draft law is limited only to elevators after installation inspection, and is separated from the Ministry of Employment and Labor's data on accidents occurring in the manufacturing and installation stages related to the elevator industry. This study analyzes the recent safety accidents of elevator workers and prepares safety measures to prevent them through the risk analysis, and also draws out the problems and improvements of the current elevator worker accident investigation to find the elevator worker accident rate that is on the increase trend.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.144-153
• /
• 1991

This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.51-56
• /
• 2008

In these days, work-related musculoskeletal disorders(WMSDs) is one of the issues in the shipbuilding industry. As the number of injured workers and demands for worker's compensation have rapidly increased, improvement of work conditions and environments to prevent WMSDs has been more demanded. To reduce WMSDs' hazards in the shipbuilding industry, simulation technique which showed it's ability of increasing the manufacturing productivity was applied, because simulation technique has the evaluation ability for a worker's danger level of production process by RULA(Rapid Upper Limb Assesment). In this research, worker's altitude had modeled and worker's action has simulated. After the caution level was evaluated, we pointed out clues which had high workload. To reduce work-load, we applied ergonomic principles for improving working conditions and environments. Improved working conditions and environments were simulated using human modelling and simulation and their workload were evaluated again.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.133-137
• /
• 2006

Can examine cause that the construction industry is faced in crisis of skill exhaustion in two sides. One is the tribe of actuality production manpower by entry evasion and graying of young man class specially new manpower to the tribe of skill manpower. Another is qualitative decline of skill manpower. Generally, problem of the systematic knowledge tribe and the picking up tribe about new technology etc, exists because learn skill for shoulder beyond in spot. In cutting phenomenon of skill that is depended on personal relationships availability with skilled worker in hereafter, problem that worker who is old or enter through rain skilled worker does not learn all life skill is detected. These problems institute entry of young man class and necessity of systematic vocational education training specially new human strength strongly. This study does presentation of way to promote construction industry entry of young man class and improvement way of vocational education training system that can do to train these by function manpower by purpose.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.57-64
• /
• 2008

The Semiconductor industry in Korea has achieved a great contribution to the growth of its economy for the last 20 years with its product export ranked to #1 nowadays. However, the working environment in semiconductor industry is always exposed to a potential risk of critical safety issue for workers with many kinds of utilities used such as toxic chemicals, gases, high vacuum and high voltages of electricity. This study is focused on empirical research to find out the factors on safety climate and to examine the relationships of safety climate and safe work behaviour in the work site of Korea semiconductor industry. As a result of simulation, a strong positive relationships and safe work behaviour have been identified in this study. Its result and implications has been discussed and suggested further studies on its limitation from this study.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2014.10a
• /
• pp.189-203
• /
• 2014

Silicon Valley's legal foundation in recent years has surfaced on the radar of policy planners who model Silicon Valley's ICT industry. Precisely, the prohibition of covenants not to compete is linked to firm to firm knowledge spillovers by way of mobile workers positioned as nodes in a system of innovation. Meanwhile, traditional frameworks support enforcement of covenants not to compete as a way to encourage R&D into the worker and to prevent the worker's tacit knowledge and know-how from fleeing. This article examines the ICT industry in Silicon Valley and Route 128 to argue that California's unique law is a key factor in the success of Silicon Valley firms. Theoretically, we reconcile the ostensible strife between enforcement and prohibition frameworks by presenting an industrial approach. We contend that selective enforcement by industry can maximize the policy tools of discorded planners.

• Journal of Fashion Business
• /
• v.16 no.5
• /
• pp.74-87
• /
• 2012

The service industry will be essentially extended during the economic growth and industrial development. Especially, the role of workers meeting the customers in service industry is very important from the view point of purchase intention. So many companies in service industry endeavor to increase the work efficacies of workers through the various prizes and incentives, and improve the job performance by additional education. Recently, the incentive tours are comprehensively accepted as an efficient tool to promote the loyalty and job performance of workers. The incentive tours enable the worker to gain the cultural experiences. They will experience not only the natural heritages and antiques, but also the local life culture and arts culture. The culture marketing for worker as the internal customer increase the worker's loyalty and the ties among workers, and therefore, their job performance will be increased. The empirical results (162 workers surveyed) showed the incentive tours have improved both the individual and group's job performance at a cosmetic sales organization. So it is recommend to plan the organization specific incentive tour in order to improve the productivity of the service organization.