• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.214-220
• /
• 2019

The calibration method of the initial value error obtained in the weight measurement through anchor bolt type strain gauge sensor is proposed. The strain gauge sensor is developed for preventing the overturning of forklift, which is the most frequent type of safety-accident in industry. It was confirmed that the initial value error is caused from the physical and mechanical error of anchor bolt, and the environmental problem. Since the elimination of these causes falls outside the realm of this research, we find out the calibrated values based on all the causes, and we adjust the initial values of analog-to-digital convertor (ADC) module consisted of strain gauge sensor block using the calibrated values. We use the linear interpolation method for our calibration. We confirm that four sensor modules have the different under 5% between the real weight and the measured value in the experiment applied with the calibration of initial values. The low correlation between the real weights and ADC values is also improved through the proposed calibration.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.77-83
• /
• 2019

Major causes of industrial accidents include falls and gas leak. The existing safety helmet and smart device combination products are focused on convenience, so the functions to prevent such accidents are insufficient. We developed a smart helmet focusing on fall accident detection and gas leak detection. We also developed management system to manage workers efficiently. Its core function is to detect dangerous conditions of employees, to communicate with managers and to confirm the situations of workers. The effectiveness of the combustible gas measurement capability was verified through experiments. However, since a significant amount of power consumption is founded due to continuous operation of the board and the sensor, countermeasures such as replacing with a large capacity battery are required.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.5
• /
• pp.48-54
• /
• 2021

According to the Ministry of Employment and Labor's statistics on occupational fatalities in South Korea, more than half of the fatalities in the past five years have occurred in the construction industry. The stuck-by and caught-in-between accidents associated with construction equipment is the major source of fatalities from construction sites. In order to prevent such accidents in construction sites, the government has spent lots of efforts including proposing the "special law on construction safety" and encouraging the implementation of new technology for accident prevention. However, numerous accidents are still occurred at construction sites and further efforts are still required. In this manner, this study developed a collision prevention technique that can prevent collision between equipment and worker by recognizing location and type of the nearby objects through ultrasound scanning. The study conducted a pilot experiment and the analysis results demonstrate the feasibility of achieving high performance in both object recognition and location estimation. The developed technique will contribute to prevent collision accidents at construction sites and provide the supplemental knowledge on developing automated collision prevention system for construction equipment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1381-1390
• /
• 2021

Smart grid is a representative convergence new technology in the era of the 4th industry revolution that deals with three broad security areas consisting of control system, the power grid, and the consumer. As it is a convergence new technology of the 4th industrial society, it is true that it can have a positive effect on the country's technological development, growth engine, and economic feasibility in the future. However, since the smart grid is expected to cause enormous damage in the event of a security accident, energy-related organizations must prepare various security measures to predict and respond to the latest security incidents. In this paper, the current status of domestic and foreign smart grids, trends in security standards, vulnerabilities and threats, and prospects for smart grid security technologies are to be considered.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.37-46
• /
• 2021

According to the Korean Statistical Information Service, the number of fatal occupational accidents per 100,000 workers is the highest in Korea, among all the OECD countries. The safety of construction workers is managed by the construction technology promotion act (CTPA) and the occupational safety and health act (OHSA). A review of the current safety management laws is required to improve them for the construction industry, where the numbers of accidents and deaths are constantly increasing. Accordingly, the aim of this study was to identify the problems in unclear business areas through comparison and analysis of the CTPA and OHSA guidelines and establish effective site-dependent construction safety management plans. The overlapping safety and health management terms and tasks of organizations were derived along with identifying the overlapping items of the safety management and hazard and risk prevention plans. Based on these results, several improvements for the design stage, safety cost, and safety education have been suggested in this paper. In addition, an improved model based on the integration and an optimized compromise between these two laws for safety management in areas where many accidents have occurred in recent years has been reported here.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.8
• /
• pp.139-147
• /
• 2021

In this study, we proposed the possibility of reliability analysis of risk index by using Monte Carlo simulation as basic data of safety accident occurrence data and expert opinion by construction industry type. Through this, it is expected that risk index for safety accidents according to detailed types of works will be presented stochastically and it will be possible to predict the risk factors and the expected range of damage based on the reliability analysis in the construction safety management plan. It will also reduce many of the planning risks that are common to decision makers in the field of construction management. In identifying risks, road bridge construction was classified into earthworks, drainage works, and bridge construction, and possible safety accidents were classified based on expert data. The risk index was calculated for each detailed construction of road and bridge construction, drainage construction, and bridge construction.

• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.20-29
• /
• 2022

To stem the ever-prevalent occurrence of industrial accidents in the construction industry, which is emerging as a social problem, efforts must be invested by various stakeholders. Specifically, among stakeholders, the orderer is at the top of a project's decision-making structure. Therefore, the orderer's awareness of safety and health directly affects the process of securing the safety of the overall construction site. In this light, the present study aims to identify differences in the perceptions of each stakeholder regarding the obligatory safety and health measures for clients that have recently been introduced. In addition, it suggests specific implementation plans in the Korean context. The data used for analysis were collected through a survey targeting stakeholders such as orderers, safety managers, and site managers, and the collected data were quantitatively reviewed by using multivariate analysis methods such as analysis of variance. As a result of the analysis, the introduction of safety and health obligations for the owner was found to be necessary, and the designation and operation of safety and health experts as an action plan was deemed reasonable. The authors expect that the results of this study can be used as basic data for revising the related regulations in Korea. Moreover, as a further study, a review of the effectiveness after improving regulations would contribute strongly to the domain.

• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.30-40
• /
• 2022

The death rate in the construction industry, which is more than twice that of other industries, increases the need to solve chronic safety problems. In a situation in which the safety management measures that have been maintained thus far are unable to reduce construction accidents, the introduction of smart construction safety technology (SCST) that reflects the 4th industrial technology is required for the safety management of workers. Large corporations or public institutions have introduced SCST and are operating pilot sites, but SCST is still in its infancy and there have yet to exist field data regarding necessity and effectiveness. In this study, the concept of SCST, which has still to be established, is defined, and the actual condition of SCST was analyzed through a survey. Through the analysis of the necessity of SCST introduction, convenience, and effectiveness before and after its application, problems such as problems from the field point of view as well as other factors hindering the introduction of such technology are derived in detail. In addition, an effective combination of technologies for safety management at the current level is determined and an activation plan is presented.

• Food Science and Industry
• /
• v.55 no.3
• /
• pp.301-307
• /
• 2022

As a result of analyzing the domestic and foreign HACCP systems, advanced countries mandated HACCP system on all foods to strengthen food safety management and USA, EU and China do not apply small-scale HACCP system. Looking at the cases of food safety accidents in Korea and the non-compliance rate of HACCP certification evaluation by size, the accident rate of companies without HACCP certification was 31.2% higher than that of companies with HACCP certification. The nonconformity rate of food inspection standards was analyzed to be 89.0% higher than that of HACCP certification companies. Based on the international trend of food safety management and the frequency of food safety accidents, it is proposed to gradually expand the mandatory application of HACCP system in Korea to all foods, and to change the small-scale HACCP standard from less than 500 million Korean won or 21 employees to less than 500 million Korean won.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1670-1675
• /
• 2021

The adoption of smart construction technology in the construction industry is progressing rapidly. By utilizing smart construction technologies such as BIM (Building Information Modeling), drones, artificial intelligence, big data, and Internet of Things technology, it has the effect of lowering the accident rate at the construction site and shortening the construction period. In order to introduce a digital twin platform for construction site management, real-time construction site management is possible in real time by constructing the same virtual space. The digital twin virtual space construction method collects and processes data from the entire construction cycle and visualizes it using a 3D model file. In this paper, we introduce a modeling automation technique that constructs an efficient digital twin space by automatically generating 3D modeling that composes a digital twin space based on 3D spatial data.