• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.138-145
• /
• 2007

The effects of amylopectin and hydrocolloid (locust bean gum and guar gum) content on wheat flour dough and noodle properties were investigated. As the amount of amylopectin increased, the water absorption rate (farinograph), the tension (tension test), the gel stability (freeze-thawing treatment), and the springiness and the cohesiveness (TPA) increased, but the pasting temperature (RVA), the lightness and yellowness (color measurement), and the hardness (TPA) tended to decrease. In sensory evaluations, the scores for cohesiveness, springiness, and acceptability of cooked noodle increased as the proportion of amylopectin increased. The proper combination of amylose/amylopectin ratio and hydrocolloids improved the freeze-thaw stability and the sensory acceptability of wheat flour dough and noodle.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.217-225
• /
• 2004

This study was performed to provide the basic knowledge about the mushroom cultivation facilities. Classified current status of cultivation facilities in Gyeongnam province was investigated by questionnaire. The structure of Pleurotus eryngii cultivation facilities can be classified into the simple and permanent frame type. The simple frame structures were mostly single-span type, on the other hand, the permanent frame structures were more multi-span than simple structures. And the scale of cultivation facilities was very different regardless of structural type. But as a whole, the length, width and ridge height were prevailing approximately 20.0 m, $6.6\~7.0m$ and $4.6\~5.0m$ range, respectively. The floor area was about $132\~160\;m^2$, and floor was built with concrete to protect mushrooms from various harmful infection. The roof slope of the simple and permanent type showed about $41.5^{\circ}\;and\;18.6\~28.6^{\circ}$, respectively. The width and layer number of growing bed for mushroom cultivation were around $1.2\~1.6m$, 4 layers in common, respectively. Most of year round cultivation facilities were equipped with cooler, heater, humidifier, and ventilating fan. Hot water boiler was the most commonly used heating system, the next was electric heater and then steam boiler. The industrial air conditioner has been widely used for cooling. And humidity was controlled mostly by ultra-wave or centrifuging humidifier. But some farmers has been using nozzle system for auxiliary purpose. More then $90\%$ of the mushroom house had the independent environment control system. The inside temperature was usually controlled by sensor, but humidity and $CO_2$ concentration was controlled by timer for each growing stage. The capacity of medium bottle was generally 850 cc and 1100cc, some farms used 800 cc, 950 co and 1,250 cc. Most of mushroom producted has been usually shipped to both circulating company and joint market.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.113-121
• /
• 2014

Objectives: This study is intended to seek credible and efficient measurements on airborne asbestos concentrations that allow immediate action by establishing complementary data through comparative analysis with existing PCM and KF-100 method real-time monitoring equipment in working areas in Seoul where asbestos-containing buildings are being demolished, including living environment surroundings. Materials: We measured airborne asbestos concentrations using PCM and KF-100 at research institutes, monitoring networks, subway stations and demolition sites of asbestos-containing buildings. Through this measurement data and KF-100 performance testing, we drew a conversion factor and applied it via KF-100. Finally we verified the relationship between PCM and KF-100 with statistical methods. Results: The airborne asbestos concentrations by PCM for the objects of study were less than the detection limit(7 fiber/$mm^2$) in three (20%) out of 15 samples. The highest concentration was 0.009 f/cc. The airborne asbestos concentrations by PCM in laboratories, monitoring networks, subway stations and demolition sites of asbestos-containing buildings were respectively $0.002{\pm}0.000$ f/cc, $0.004{\pm}0.001$ f/cc, $0.009{\pm}0.001$ f/cc, and $0.002{\pm}0.000$ f/cc. As a result of KF-100 performance testson rooftops, the conversion factor was 0.1958. Applying the conversion factor to KF-100 for laboratories, the airborne asbestos concentrations ratio of the two ways was nearly 1:1.5($R^2$=0.8852). Also,the airborne asbestos concentration ratio of the two ways was nearly 1:1($R^2$=0.9071) for monitoring networks, subway stations, and demolition sites of asbestos-containing buildings. As a result of independent sample t-tests, there was no distinction between airborne asbestos concentrations monitored in the two ways. Conclusions: In working areas where asbestos-containing buildings are being demolished, including living environment surroundings, quickly and accurately monitoring airborne asbestos scattered in the air around the working area is highly important. For this, we believea mutual interface of existing PCM and a real-time monitoring equipment method is possible.

• Korean Journal of Food Science and Technology
• /
• v.46 no.1
• /
• pp.79-86
• /
• 2014

In previous work, we fermented coffee beans using solid-state culture with various fungal mycelia to enhance the physiological activity of the coffee. The coffee fermented with Monascus sp. showed a higher physiological activity than non-fermented coffee or other coffees fermented with mushroom mycelium. The aim of this study was to characterize the various fermented coffees with respect to their area of cultivation and their variety using Monascus purpureus (MP) mycelium solid-state culture. Thirty types of green coffee beans, which varied in terms of their cultivation area or variety, were purchased from different suppliers and fermented with MP under optimal conditions. Each MP-fermented coffee was medium roasted and extracted further using hot water (HW) under the same conditions. Of the HW extracts, those derived from MP-Mandheling coffees had the highest yield (13.6-15.5%), and MP-Robusta coffee showed a significantly higher polyphenolic content (3.03 mg gallic acid equivalent/100 mg) and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) free radical scavenging activity (27.11 mg ascorbic acid equivalent antioxidant capacity/100 mg). Furthermore, in comparison to other MP-fermented coffees at $1,000{\mu}g/mL$, MP-Robusta coffee showed not only the most effective inhibition of tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) production in LPS-stimulated RAW 264.7 cells (67.1% of that in LPS-stimulated control cells), but also an effective inhibition of lipogenesis in 3T3-L1 adipose cells (22.2% of that in differentiated control cells). In conclusion, these results suggest that Vietnam Robusta coffee beans solid-state fermented with MP mycelium are amenable to industrial applications as a functional coffee beverage or material.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.37-45
• /
• 2006

Recently, wood-framed houses has been built in the Korea for pension. Wood is good material for human healthy, while the construction lumbers are treated with preservative such as CCA (chromated copper arsenate), which contain some toxic elements for human body. However, if the waste woody biomass treated with various heavy metals, which has been collected from house construction or demolition, was fired in the field, and incinerated or landfilled after mass collection, such components will result in the toxic air pollutants in the burning or land fills, and spreaded into other areas. So the careful selection of wood and chemicals are required in advance for house construction, in particular, for environment-friendly housings. Therefore, this study was carried out to determine the content of toxic heavy metals in woody materials such as domestic hinoki and imported hemlock treated with CCA for housing materials, and the post-treated wood components such as organic fertilizer, sludge, dry-distilled charcoal and carbonized charcoal, to be returned finally into soil. The results are as follows. 1) The chemical analysis of toxic trace elements in various solid biomass required accurate control and management of laboratory environment, and reagents and water used, because of the error of data due to various foreign substances added in various processing and transporting steps. So a systematic analyzers was necessary to monitor the toxic pollutants of construction materials. 2) In particular, the biomass treated with industrial biological or thermal conditions such as sludge or charcoals was not fully dissolvable after third addition of $HNO_3$ and HF. 3) The natural woody materials such as organic fertilizer, sludge. and charcoals without any treatment of preservatives or heavy metal components were nontoxic in landfill because of the standard of organic fertilizers, even after thermal or biological treatments. 4) The CC A-treated wood for making the construction wood durable should not be landfilled, because of its higher contents of toxic metals than the criterion of organic fertilizer for agriculture or of natural environment. So the demolished waste should be treated separately from municipal wastes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.1
• /
• pp.44-50
• /
• 2013

The persons in charge of management request diagnosis and prescription to tree hospitals in order to get consultation about the problems like blight that occur in landscape tree management. This study aims to analyze what the main problems and questions raised by landscape gardeners are and those concerned in landscape tree management. This is done by investigating landscape tree-related questions and answers uploaded on the online consultation boards of the plant diagnostic centers approved in Korea including the Seoul National University Plant Clinic, the Chungbuk National University Plant Hospital, and the Kangwon Diagnostic Center. As a result, those concerned in landscape occupied the most as 81.4% among the questioners. However, only 11.5% did explain the plant management history or surrounding environment, which is essential for landscape tree diagnosis when asking questions. This shows that those concerned in landscape lack basic knowledge or interest about plant diagnosis. Among 263 questions about landscape trees, questions about physiological damage included 94 cases that were the most taking up 35.8%. Moreover, the next were damage by insects and damage by disease in order. It is thought that due to the characteristics of physiological problems that occur by various sorts of stress and with no signs, they tend to request diagnosis or prescription the most. The most frequent reasons for physiological damage are water stress and temperature stress. About damage by disease, there exist many types of diseases, and there are many complex damages accompanied by physiological causes. About damage by insects, the most common include damage by moths. In consideration of this result, universities or technician training centers should provide education for landscape tree management so that landscape technicians and students can acquire essential knowledge and information about landscape tree management and increase their interest in it. In particular, it is necessary to provide profound learning opportunities for plant physiology, and the technicians should make efforts themselves. In addition, it is needed to build organizations to which they can ask technical questions about landscape planting and management in order to understand landscape industry in general and the actual status of landscape planting technique and the actual field. Moreover, to elevate systemicity and expertise in the area of landscape tree management not yet equipped with the foundation, it is needed to cultivate the technicians intensively and conduct research by those concerned both in academic and industrial circles.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.4
• /
• pp.1125-1147
• /
• 2014

This study was conducted to develop the health evaluation indicator of pond wetland in order to enhance the quality of eco-experience in rural area. The methods for development of evaluation indicator were consisted of 3 stages; 1st, the precedent assessment protocol was applied to 10 pond wetlands in farm villages, and eco-experience expert survey was conducted to selection the evaluation item and criteria at 2nd and 3rd stages. In the results of applying the precedent assessment protocol, we found out two problems; 1) the evaluation result of value determination and conservation value were too simple, and 2) the score by evaluation items were nearly the same, because evaluation criteria in not precisely for application in rural area. These results were reflected to expert survey. According to the 1st survey results, they suggested that 4 items should be maintained, and 3 items should be deleted, and 2 items should be modified among a total of 9 times. Therefore, it was modified into the evaluation protocol having a total of 8 items. According to the 2nd survey results, the selected evaluation items were generally proper. With regard to items for assessing the health condition of pond wetland, we selected a total of 8 items; (1) Connectivity to forest, (2) Connectivity between water body and wetland connection, (3) Number of Vegetation, (4) Surround land use, (5) Interspersion of Vegetation, (6) Crossing Structure, (7) Wetland size, and (8) Outlet structure. In addition, it was suggested that accessibility, visibility, and trash were need for utilization of pond wetland as a place for eco-experience. It is expected that the selected evaluation indicator can help to utilize the pond wetland as an eco-experience space in rural area, and maintain the pond wetland as a space for conservation of biodiversity.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.333-340
• /
• 2015

Because soils in reclaimed lands nearby coastal areas have much higher salinity and moisture content than soils in inland area, parts of greenhouses embedded in such soils are exposed to highly corrosive environments. Owing to the accelerated corrosion of galvanized steel pipes for substrucrture and structure of greenhouses in saline environments, repair and reinforcement technologies and efficient maintenance and management for the construction materials in such facilities are required. In this study, we measured the corrosion rates of the parts used for greenhouse construction that are exposed to the saline environment to obtain a basic database for the establishment of maintenance and reinforcement standards for greenhouse construction in reclaimed lands with soils with high salinity. All the test pipes were exposed to soil and water environments with 0, 0.1, 0.3, and 0.5% salinity during the observation period of 480 days. At the end of the observation period, salinity-dependent differences of corrosion rate between black-surface corrosion and relatively regular corrosion were clearly manifested in a visual assessment. For the soils in rice paddies, the corrosion growth rate increased with salinity (0.008, 0.027, 0.036, and $0.043mm{\cdot}yr^{-1}$ at 0, 0.1, 0.3, and 0.5% salinity, respectively). The results for the soils in agricultural fields are 0.0002, 0.039, 0.040, and $0.039mm{\cdot}yr^{-1}$ at 0, 0.1, 0.3, and 0.5% salinity, respectively. The higher corrosion rate of rice-paddy soil was associated with the relatively high proportion of fine particles in it, reflecting the general tendency of soils with evenly distributed fine particles. Hence, it was concluded that thorough measures should be taken to counteract pipe corrosion, given that besides high salinity, the soils in reclaimed lands are expected to have a higher proportion of fine particles than those in inland rice paddies and agricultural fields.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.107-107
• /
• 2017

Sweet corns are enjoyed worldwide as processed products and fresh ears. Types of sweet corn are based on the gene(s) involved. The oldest sweet corn type has a gene called "sugary (su)". Sugary-based sweet corn was typically named "sweet corn". With its relatively short shelf life and the discovery of a complementary gene, "sugary enhanced (se)", the sweet corn (su only) was rapidly replaced with another type of sweet corns, sugary enhanced sweet corn, which has recessive homozygous su/su, se/se genotype. With the incorporation of se/se genotype into existing su/su genotype, sugary enhanced sweet corn has better shelf life and increased sweetness while maintaining its creamy texture due to high level of water soluble polysaccharide, phytoglycogen. Super sweet corn as the name implies has higher level of sweetness and better shelf life than sugary enhanced sweet corn due to "shrunken2 (sh2)" gene although there's no creamy texture of su-based sweet corns. Distinction between sh2/sh2 and su/su genotypes in seeds is phenotypically possible. The Involvement of se/se genotype under su/su genotype, however, is visually impossible. The genotype sh2/sh2 is also phenotypically epistatic to su/su genotype when both genotypes are present in an individual, meaning the seed shape for double recessive sh2/sh2 su/su genotype is much the same as sh2/sh2 +/+ genotype. Hence, identifying the double and triple recessive homozygous genotypes from su, se and sh2 genes involves a testcross to single recessive genotype, chemical analysis or DNA-based marker development. For these reasons, sweetcorn breeders were hastened to put them together into one cultivar. This, however, appears to be no longer the case. Sweet corn companies began to sell their sweet corn hybrids with different combinations of abovementioned three genes under a few different trademarks or genetic codes, i.g. Sweet $Breed^{TM}$, Sweet $Gene^{TM}$, Synergistic corn, Augmented Supersweet corn. A total of 49 commercial sweet corn F1 hybrids with B73 as a check were genotyped using DNA-based markers. The genotype of field corn inbred B73 was +/+ +/+ +/+ for su, se and sh2 as expected. All twelve sugary enhanced sweet corn hybrids had the genotype of su/su se/se +/+. Of sixteen synergistic hybrids, thirteen cultivars had su/su se/se sh2/+ genotype while the genotype of two hybrids and the remaining one hybrid was su/su se/+ sh2/+, and su/su +/+ sh2/+, respectively. The synergistic hybrids all were recessive homozygous for su gene and heterozygous for sh2 gene. Among the fifteen augmented supersweet hybrids, only one hybrid was triple recessive homozygous (su/su se/se sh2/sh2). All the other hybrids had su/su se/+ sh2/sh2 for one hybrid, su/su +/+ sh2/sh2 for three hybrids, su/+ se/se sh2/sh2 for three hybrids, su/+ se/+ sh2/sh2 for four hybrids, and su/+ +/+ sh2/sh2 for three hybrids, respectively. What was believed to be a classic super sweet corn hybrids also had various genotypic combination. There were only two hybrids that turned out to be single recessive sh2 homozygous (+/+ +/+ sh2/sh2) while all the other five hybrids could be classified as one of augmented supersweet genotypes. Implication of the results for extension service and sweet corn breeding will be discussed.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.100-107
• /
• 2013

Unlike general microwave, QRD (Quadratic Residue Diffusor) Microwave used in this study is known as a new technology that enhances the sterilization effect with low power because it is possible to induce the average sterilization by changing wavelength phase difference. Therefore, basic research was conducted on the function that could sterilize culture media for plant factory by using environmentally friendly and low energy consuming QRD Microwave. The results are as follows: It was confirmed that there was no external deformation in the polyurethane foam and rock wool medium when changing the microwave level between 2 and 8 kW in different water content of culture media. However, PDA solid media at 2 kW were not dissolved in 60 and 180 seconds. All of the media were dissolved in other processing. There was little difference in the microwave irradiation level and surface temperature of the strain according to the processing time between Bacillus sp. and Burkholderia sp. In the sterility test according to the microwave irradiation level and processing time, it was confirmed that both Bacillus sp. and Burkholderia sp. grew in the microwave level 2 kW regardless of time. In the microwave level 6 kW, all experimental groups except the processing of Burkholderia sp. for 60 seconds were sterilized, and all of Bacillus sp. was killed in the all experimental groups. In the microwave level 8 kW, it was confirmed that both Bacillus sp. and Burkholderia sp. were sterilized regardless of time. The temperature in microwave-processed media after contaminating strains to each medium was maintained at more than 100 in polyurethane foam and rock wool medium after 60 seconds. In general, it was shown that it was possible to sterilize after 60 seconds. Therefore, it is considered that Bacillus sp. and Burkholderia sp. which are the biggest problems in the plant factory can be adequately sterilized by QRD Microwave used in this study.