• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.14-19
• /
• 2011

Conveyors cause a high serious and fatal injuries in the industry. Every year people are hurt or killed as a result of accidents on conveyors. Most accidents occur during operation and maintenance when employees are working on moving, unguarded conveyors or when the conveyors starts unexpectedly. In 2008 there were 486 reported injures ranging from fatalities to injures. Of these 486 reported accidents, 8 were fatalities, 66.9%(325) of reported accidents occurred in manufacturing company and 43.8%(213) occurred at the belt conveyors. The objective of this study was to invent the remote emergency stop device because industrial accidents mainly occur at blind spots where usually do not have any safety guard or device rather than the normal working places. In principle, this new device will use with the existing safety system. Then, it will be powerful safety system for preventing injuries related with conveyors.

• Clinics in Shoulder and Elbow
• /
• v.15 no.1
• /
• pp.52-64
• /
• 2012

Acute traumatic shoulder injuries related to motor vehicle accidents and industrial accident has shown a steep increase recently. In regard to the causal relationship and the previous illness, the rotator cuff tear and SLAP lesion are the mostly debated among shoulder injuries related to trauma. Both the possibility of spontaneous occurrence related to their degenerative etiology and the discordance between the extent of injury and the symptom of the rotator cuff tear and SLAP lesion, make it difficult and obscure to estimate the extent of involvement of accident. Therefore, the Insurance Committee of Korean Shoulder and Elbow Society performed a questionnaire for the shoulder specialists to investigate their criteria about deciding the treatment modalities and SLAP lesion and reviewed literatures regarding the causal relationship between the accident and the rotator cuff tear and SLAP lesion. The committee recommended the diagnostic criteria to judge contribution of the accident on traumatic shoulder injuries, and to offer a guideline for disabilities.

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.30-41
• /
• 2018

Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of criteria parameters and their possible values, provided by the experts, a unified information and analytical database is compiled, which is included in the final interrogation questionnaires. Risk assessment of industrial injuries and occupational diseases is based on statistical methods. Results: The result of the research is the creation of Guidelines for risk management on hazardous industrial sites of the Republic of Kazakhstan. The Guidelines determine the directions and methods of complex assessment of the state of industrial safety and labor protection and they could be applied as methodological basis at the development of preventive measures for emergencies, casualties, and incidents at hazardous industrial sites. Conclusion: Implementation of the information-analytical system of risk level assessment allows to analyze the state of risk of a possible accident at industrial sites, make valid management decisions aimed at the prevention of emergencies, and monitor the effectiveness of accident prevention measures.

• Journal of Industrial Convergence
• /
• v.1 no.2
• /
• pp.17-31
• /
• 2003

Many risk factors with the onset of Low Back Pain(LBP) have been identified, however, lifting out of Manual Material Handling(MMH) was the most important factor to the LBP. Injuries due to lifting took account for 34.0%(227,291) out of the total overexertion in MMH(668,084). The weight, vertical location, twist angle, lifting frequency, and lifting posture were reviewed in this study. Technical information for using the revised lifting equation to evaluate a variety of two - handled manual material handling tasks was suggested. To measure worker's fatigue in lifting task, Lifting Index Simulator(LIS) was create under the revised NIOSH(National Institute for Occupational Safety and Health) lifting equation. For the implementation of the LIS, data was collected in A company manufactures various paints in Si-Wha industrial complex, Kyunggi-Do. The results of the Lifting Index(LI) were analyzed by MANOVA to find the relation with lifting variables collected. It was found that horizontal distance, vertical distance, travelling distance and frequency were significant at the 0.01 level and weight was significant at the 0.05 level. The purpose of this paper is to reduce the chronical low back pain for the manual material handlers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1153-1163
• /
• 2015

The purpose of this study is to investigate the effects of task-oriented activities on hand functions in patients with hand injuries. From December 2011 to October 2012, sixteen patients with hand injuries at C Hospital in Changwon, Gyeongsangnam-do, Korea were randomly divided into two groups. One group was subjected to task-oriented activity and the other to general exercise. Two groups performed each activity once a day, three times a week, for four weeks. The group with the task-oriented activities was provided with the tasks according to subject-preference based on the result of Canadian Occupational Performance Measure (COPM). To verify the effect of intervention, the following hand function measures were used: grip strength, pinch strength, and the range of opposition and abduction, Purdue pegboard test and Disabilities of the Arm, Shoulder and Hand (DASH). Both groups showed significant increase in all of the hand function measures after 4-week activities(p<.05). The task-oriented activity group was significantly different from the control group in powers for tip pinch, lateral pinch and three-jaw chuck pinch, Purdue pegboard test and DASH(p<.05) except in grip strength and the range of opposition and abduction suggesting better improvement in hand functions. This study shows that task-oriented activities improve the hand functions more effectively in patients with hand injuries.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.1-8
• /
• 2000

Manual material handling(MMH)is major factor which causing physical injuries of worker at working area and frequency of low back pain(LBP) is increasing industrial accidents. Especially, working in bad circumstance such as farm, orchard, harbor loading and unloading, logging place and mining place which located in inclined slope can cause much possibility of hazard and absence of working balance can cause injuries of musculoskeletal system such as joint, bone, ligament. So, this study used EMG system to measure and evaluate muscle force information and fatigue of worker when lifting on slope. The result of measuring averaged integrated EMG(AEMG) shows multifidus muscle be used more than anything else in force. neck extensors are used at 15°, 20°frequently. generally the AEMG result shows multifidus muscle be used in force. Commonly, muscle fatigue of multifidus is higher than other muscle by analysis mean power frequency(MPF). The result of load sharing rate shows multifidus and erectorspinae which are deep spinal muscles is relatively high and neck extensor is low.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.1
• /
• pp.127-139
• /
• 1993

In order to obtain basic information for the extablishment of effectivce industrial safety programmes in heavy industries & construction companies, accident records for 366 injured workes were collected from January, 1989 to December 1991 and analyzed. The results were as follows : 1. The over-all incidence rate of industrial accidents was 2.98% per year 2. Accidents were common in the workers who are in thirties and twenties. 3. According to the duration of services, the workers with jobs on above than 3 years was the most frequent victims (64.2%) 4. According to the view point of working time, the highest incidence was observed just before the end of the work (17:00-19:00). 5. According to the month of year, the incidence was higher in August(14.0%) and May(14.2%), and lowest in January (3.3%) 6. The most common type of accidents was overexertion (24.9%). 7. According to the job, the highest incidence was observed fabrication. 8. According to the site of injuries, the incidence was higher the truck (27.0%) and fingers (25.1%).

• Safety and Health at Work
• /
• v.3 no.3
• /
• pp.192-198
• /
• 2012

Objectives: Slip and fall accidents in the workplace are one of the top causes of work related fatalities and injuries. Previous studies have indicated that fall risk was related to postural and dynamic stability. However, the usage of this theoretical relationship was limited by laboratory based measuring instruments. The current study proposed a new method for stability assessment by use of inertial measurement units (IMUs). Methods: Accelerations at different body parts were recorded by the IMUs. Postural and local dynamic stability was assessed from these measures and compared with that computed from the traditional method. Results: The results demonstrated: 1) significant differences between fall prone and healthy groups in IMU assessed dynamic stability; and 2) better power of discrimination with multi stability index assessed by IMUs. Conclusion: The findings can be utilized in the design of a portable screening or monitoring tool for fall risk assessment in various industrial settings.

• Journal of the Korean Society of Safety
• /
• v.9 no.2
• /
• pp.26-32
• /
• 1994

It is quite similar in the current automated works likewise in the past manual works that single trivial human error and/or unsafe acts may lead to serious industrial accidents. Though the traditional approach for accident prevention focused on the serious injuries or losses, that was misleaded by failure of accident perception. As Heinrich pointed out, there are still enormous numbers of unsafe acts or near-misses before a real accident happen. Thus, for industrial accident prevention, a research on unsafe acts was committed. With accident data occurred during the last decade, statistics were analyzed for extracting behavioral characteristics. After that, a practical method Integrating AHP and statistics which shows possible accident factors and their priority at an individual factory was suggested. A computer program was developed also.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.11-20
• /
• 2000

Today, technologies and automation have been accelerated up in the industrial workplace. Nevertheless, many systems still require humans to handle materials manually. The Low Back Pain (LBP) is one of modern human being's most common and complex ailments. Many risk factors with the onset of LBP have been identified, however, lifting out of Manual Material Handling(MMH) was the most important factor to the LBP. The Virtual Reality(VR) is used in a variety of ways and often in a confusion and misleading manner. In order to solve the prevention of the LBP, a lifting box was translated in the Virtual Environment(VE). As simulating under the VE, optimal lifting works could be constructed. The purpose of this study is to reduce the chronical low back pain for the manual material handlers.