• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1833-1837
• /
• 2004

The two-inertia system, which has the torsion vibration, is typically found in several industrial applications. This torsion vibration will effect the quality of the rolled material as well as the stability of the drive system. Thus the speed and torsion vibration of the system have to be properly controlled. This paper, I-PDA controller designed by Coefficient Diagram Method to control a two-inertia system is proposed. The experimental result shows that both of transient and steady state specification can be fulfilled but the transient response still has long rise time. In order to improve the speed of the system response, a phase lag structure of feedforward controller is introduced to I-PDA control system. It is shown that the performance of the I-PDA control system with suitable FFC has shorter rise and settling times, no overshoot and the torsion vibration can be suppressed.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.138-145
• /
• 2010

In this paper, we report the test results of a small-scale prototype that implements an analogue-beam-formed phased antenna array in the E-band. A four-channel dual-conversion receive RF module for 71~76 GHz frequency band has been developed and integrated with a linear end-fire antenna array. Measured performance is very close to the simulated results. An ad-hoc wireless communication system has also been demonstrated. Low BER was measured for an 8PSK data stream at 1.5 Gbps with the receive array beam formed in the direction of arrival of the transmitted signal. To our knowledge this is the first steerable antenna array reported to date in the E-band.

• Communications for Statistical Applications and Methods
• /
• v.7 no.2
• /
• pp.513-523
• /
• 2000

The X-12-ARIMA program was utilized on the analysis of the time series trend on 76 Korean industrial activities data in order to ensure that the trading day effect adjustment as well as the seasonal effect adjustment is needed to extract the fundamental trend-cycle factors from various economic time series data. The trading day effect is strongly correlated with the activity of production and shipping but not with the activity of inventory. Furthermore, the industrial activities were classified with respect to the sensitivity on the tranding day effect.

• Electronics and Telecommunications Trends
• /
• v.35 no.5
• /
• pp.139-150
• /
• 2020

Fifth-generation (5G) wireless communication supports low latency of up to 1 ms or less, 20 Gbps of data rate, and more than 1 million connections. With these technical advantages, machines and equipment can be precisely adjusted, allowing 5G to be applied to industrial applications. To expand the industrial application of 5G wireless communications, major countries have introduced dedicated 5G, allowing specific companies to build and use 5G directly. Germany, UK, and Japan allocate 100 MHz, 416 MHz, and 1,200 MHz, respectively, of bandwidth dedicated to 5G. Companies with local licenses from the government are expected to accelerate the application of 5G at a low cost and low-frequency range. Therefore, Korea should introduce private 5G to foster 5G-related industrial ecosystems and successfully implement the fourth industrial revolution.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.2
• /
• pp.120-125
• /
• 2006

Since Korean government has implemented the "Number Portability System" in the domestic mobile communications market, mobile communication companies have been striving to hold onto existing customers and at the same time to attract new customers. This paper presents a competing risk model that considers the characteristics of a customer in order to predict the customer's life under the "Number Portability System." Three competing risks considered are pricing policy, quality of communication, and usefulness of service. It was observed that the customers who pay more are less sensitive on pricing policy younger people are less sensitive than older people to the quality of communication and women are more sensitive than men to the degree of usefulness of service. We expect that the result of this study can be used as a guideline for effective management of mobile phone customers under the Number Portability System.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.66-77
• /
• 2008

The existence of Internet revolutionized the computer and communications world. With the rising demand for accessing the Internet, the mobile technology has incorporated the use of Internet in mobile phones. Wireless Application Protocol (WAP) has combined two of the widest utilized technology today: mobile phones and Internet. This study aims to assess the existing WAP pages offered by the top service providers in the Philippines through usability testing experiments. The paper also aims to identify existing problems in WAP interface by focusing on the errors committed by the users. From the usability study, it was found out that common usability problems are wrong selection of links, unclear grouping of categories, wrong feedback, and redundant links. The type of service provider used is significant in determining the performance of users while experience in accessing WAP is insignificant.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.38-44
• /
• 2001

In this paper, for the microwave level meter based on the FM-CW radar, we analyze the spectrum correlation of beat signals and propose a measurement algorithm using the theory. For industrial applications, level meters must have high precision, which requires a good linearity of VCO. But, in practice, it is very complicated or very expensive to make VCO linear enough to be acceptable in the industrial field. We propose a measurement algorithm using the fact that there exists a peak in the spectrum correlation of beat signals when range difference is sufficiently small. This makes it possible to determine the range difference in a precise manner even using a practical VCO. We present some experimental results to show the validity of this algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.1-7
• /
• 2020

In modern society, as technology has advanced and human life area has expanded, there has been an increasing demand for high-quality voice and video communications services without restrictions on time and place. In response to this demand, satellite communications systems that provide a wide range of communications and that offer multiple access are evolving day by day. In satellite communications systems such as Digital Video Broadcasting - Return Channel Via Satellite (DVB-RCS) and Warfighter Information Network-Tactical (WIN-T), the multi-frequency time division multiple access (MF-TDMA) demand assigned multiple access (DAMA) scheme is used for efficient resource allocation. In this scheme, since the satellite terminals periodically request resources from the network controller, and the network controller dynamically allocates resources, it is necessary to arrange resource allocation information from time to time. Shortening of the alignment time is a more important factor in a satellite communications system in which a long transmission delay occurs due to long-distance transmission and reception. In this paper, we propose a sorting algorithm variable-selection scheme that shortens the sorting time by cross-selecting the sorting algorithm based on a threshold value, while setting the number of frames in the MF-TDMA DAMA satellite communications system as the threshold value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.1-8
• /
• 2020

The Ministry of Land, Infrastructure and Transport of Korea has been trying to spread integrated railway communication network technologies based on a major railway policy since 2012. As a result, the world's first commercial Long-Term Evolution - Railway (LTE-R) network was established on the Gangneung line (Manjong station - Gangneung station) and has been commercially operating as a railway communication system since 2017. Special function and performance requirements are needed for safe and efficient railway operations, such as group calls, emergency calls, functional addressing, and train control based on wireless communications. In this paper, we present functional and performance railway communications requirements that are based on European wireless railway communications systems. In addition, we measured communications characteristics and performance using a KTX field test on the Gangneung line to analyze the validity and reliability of the LTE-R network. Although the average Radio Frequency (RF) conditions were satisfied in the requirements, we found sudden communications quality degradation, such as Radio Link Failure (RLF) in some railway sections. We propose a way to improve performance and network installations based on in-depth analysis of LTE-R communications field-test results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.90-98
• /
• 2003

The real-time industrial network, often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial communications. More specifically, this paper presents an analytical and experimental performance evaluation of the switched Ethernet and a case study about networked control system.