• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1547-1554
• /
• 2017

VESTA (Verification of Ex-vessel corium STAbilization) and VESTA-S (-small) test facilities were constructed at the Korea Atomic Energy Research Institute in 2010 to perform various corium melt experiments. Since then, several tests have been performed for the verification of an ex-vessel core catcher design for the EU-APR1400. Ablation tests of an impinging $ZrO_2$ melt jet on a sacrificial material were performed to investigate the ablation characteristics. $ZrO_2$ melt in an amount of 65-70 kg was discharged onto a sacrificial material through a well-designed nozzle, after which the ablation depths were measured. Interaction tests between the metallic melt and sacrificial material were performed to investigate the interaction kinetics of the sacrificial material. Two types of melt were used: one is a metallic corium melt with Fe 46%, U 31%, Zr 16%, and Cr 7% (maximum possible content of U and Zr for C-40), and the other is a stainless steel (SUS304) melt. Metallic melt in an amount of 1.5-2.0 kg was delivered onto the sacrificial material, and the ablation depths were measured. Penetration tube failure tests were performed for an APR1400 equipped with 61 in-core instrumentation penetration nozzles and extended tubes at the reactor lower vessel. $ZrO_2$ melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed. To evaluate the tube ejection mechanism, temperature distributions of the reactor bottom head and in-core instrumentation penetration were measured by a series of thermocouples embedded along the specimen. In addition, lower vessel failure tests for the Fukushima Daiichi nuclear power plant are being performed. As a first step, the configuration of the molten core in the plant was investigated by a melting and solidification experiment. Approximately 5 kg of a mixture, whose composition in terms of weight is $UO_2$ 60%, Zr 10%, $ZrO_2$ 15%, SUS304 14%, and $B_4C$ 1%, was melted in a cold crucible using an induction heating technique.

• Korean Journal of Plant Resources
• /
• v.10 no.1
• /
• pp.86-93
• /
• 1997

In order to induce somatic embryogenesis from the stem explants and anther of Kalanchoe daigremontiana, the explants were cultured on MS medium supplemented with auxin (2,4-D, IAA, NAA) and/or cytokinin (BAP) for 8 weeks. Callus from explants was induced most efficiently on MS medium containing. 2.0mg/L NAA and 0.2mg/L BAP. Somatic embryogenesis in stem callus was formed by transfering embryogenic callus from induction media containing growth regulators to medium without growth regulators and then to the medium containing auxin and cytokinin (0.1 mg/L IAA and 1.0mg/L BAP). Callus formation occurred actively in the anthers at early uninucleate stage, and by low temperature pretreatment at $4^{\circ}C$ for 3days. Somatic embryogenesis from the anther callus was induced on MS medium containing 1.0mg/L NAA and 1.0mg/L BAP, 2.0mg/L NAA and 0.2mg/L BAP. The tetraploid of 5.4% was obtained among plants regenerated from anthers.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.603-608
• /
• 2009

In this study, "Hongro" apples for test samples were selected from a market for aroma analysis. Analysis was done after 1 hr, in a forming headspace while maintaining a temperature of $25^{\circ}C$. First, the complex aroma of the apples was assessed by a Direct Sensory Method. Secondly, the complex aroma was analyzed under individual aroma conditions separated by GC/FID/Olfactometry. Finally, aroma component analysis by GC/MS was performed. Degrees of contribution of aroma components were evaluated by an aroma value calculation considering aroma duration time, frequency, and intensity. The contribution rate (%) of the aroma induction component influencing apple aroma was determined by aroma component analysis and aroma contribution degree. As a result, it was found that the top four components were as follows, by contribution rate (%): acetic acid (23%), 1-hexanol (16%), butyl ethanoate (13%), 4-methoxy-2-methylbutane (9%). These four components constitute the complex aroma tested by the direct sensory method, and was largely recognized by the apple aroma test panel. Consequently, it was found that these components are the key factors in apple aroma. If the mechanism of formation of these components can be found, it could have a significant influence on consumers' acceptance of new varieties of apples.

• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.201-207
• /
• 2005

A phenanthrene-degrading bacterium HS362, which is capable of using phenanthrene as a sole carbon and energy source, was isolated from oil contaminated soil. This strain is a gram negative, rod shaped organism that is most closely related to Sphingomonas paucimobilis based on biochemical tests, and belongs to the genus Sphingomonas based on fatty acids analysis. It exhibited more than $99.2{\%}$ nucleotide sequence similarity of 16S rDNA to that of Sphingomonas CF06. Thus, we named this strain as Sphingomonas sp. HS362. It degraded $98{\%}$ of phenanthrene after 10 days of incubation when phenanthrene was added at 500 ppm and $30{\%}$ even when phenanthrene was added at 3000 ppm. Sphingomonas sp. HS362 could also degrade low molecular weight PAHs(Polycyclic aromatic hydrocarbons) such as indole and naphthalene, but was unable to degrade high molecular weight PAHs such as pyrene and fluoranthene. The optimum temperature and pH for phenanthrene degradation were $30^{\circ}C$ and $4{\~}8$, respectively. Sphingomonas sp. HS362 could degrade phenanthrene effectively in the concentration range of NaCl of up to $1{\%}$. Its phenanhrene degrading ability was enhanced by preculture, suggesting the possibility of induction of phenanthrene degrading enzymes. Starch and surfactants such as SDS, Tween 85, and Triton X-100 were also able to enhance phenanthrene degradation by Sphingomonas sp. HS362. It carries five plasmids and one of them, plasmid p4, is considered to be involved in the degradation of phenanthrene according to the plasmid curing experiment by growing at $42^{\circ}C$.

• Korean Journal of Microbiology
• /
• v.35 no.4
• /
• pp.277-282
• /
• 1999

A bacterium producing the extracellular cellulase was isolated from cattle feces and screened as cellulase activity was excellent upon congo red straining method and activity measurements. Isolate was identified as Bacillus subtilis CH-10 on the basis of morphological and biochemical properties as well as cellular fatty acids composition. The enzyme which the isolate secretes had the optimum initial pH and temperature for its induction was 7.5 and 50${\circ}C$, respectively. The maximum CMCase activity in crude enzyme solution was observed at pH 7.5 and 75${\circ}C$ and was stable for pH 7.5 to 9.0 to maintain 70% activity. When the isolate was cultured in CMC media at 37${\circ}C$ for 24 hrs, CMCase and FPase activity was 1.13 U/㎖and 0.16U/㎖, respectively whereas Avicelase and ${\beta}$-glucosidase activity was not detected. When crude supernatant was used for zymogram, three major bands, cel 1, cel 2 and cel 3, were detected approximately 39, 41 and 57 KDa, respectively on CMC-SDS-PAGE.

• Applied Biological Chemistry
• /
• v.48 no.4
• /
• pp.322-325
• /
• 2005

Pseudomonas sp. JH1014 was isolated from stream water as a detergent-compatible alkaline protease producing microorganism. The strain produced no detectable cellulolytic activity in LB medium. The addition of carboxymethyl cellulose induced the production of carboxymethyl cellulase (CMCase) without causing any significant change in the growth pattern of the strain. The strain reached its maximum growth after 9 to 12 h at $37^{\circ}C$, and the production of CMCase in the presence of the substrate reached its maximum after 21 h of growth at $37^{\circ}C$. The optimum pH of the crude enzyme preparation was pH 6.0. The enzyme had an optimal temperature at $55^{\circ}C$, and retained 70% of its original activity when preincubated at $70^{\circ}C$ for 10 min. Activity staining of the crude enzyme preparation separated on an SDS-PAGE gel showed two active bands with molecular masses of 54 and 30 kDa, indicating that Pseudomonas sp. JH1014 produced at least 2 kinds of CMCase.

• Journal of Animal Reproduction and Biotechnology
• /
• v.35 no.3
• /
• pp.232-238
• /
• 2020

This study used adult wistar-based rats to observe the sexual cycle as a morphological characteristic of vaginal epithelial cells by vaginal smearing, and investigated the fetal number through mating with male rats of the same strain. The target animal was a 12 to 13-week-old Wistar-based mature unlighted rat (weight 220 g to 240 g), room temperature 23 ± 2℃, 14 hours artificial lighting (05:00 to 19:00 hours), 10 hours Adapted individuals were used for rearing for at least 2 weeks under the conditions of the darkroom (19:00 to 05:00). The feed was managed for free feeding of pellet feed for animals and water. The vaginal smearing method was used for the experiments by observing the sexual cycle every morning and confirming that the normal sexual cycle of 4 or 5 days was repeated at least 2 cycles or more. As a result, the proestrus was found to have few red blood cells, the cells and nuclei were rather large and round, and many nucleated cells were identified. In the case of the estrus, the cells were large and the nuclei were not stained, and most of the keratinocytes were found. In addition, in the metestrus and diestrus, there were many white blood cells, and it was confirmed that nucleated epithelial cells and keratinocytes were significantly reduced. The pregnancy period was 21 ± 1.8 days, and the number of live births per delivery was 11.9 on average. The number of fetuses on the 8th and 10th days of pregnancy were 15.2 ± 0.4 and 15.4 ± 0.3, respectively. On the contrary, the number of fetuses on the 12th day of pregnancy was 12.9 ± 0.6, which was significantly (p < 0.05) decreased compared to the 10th day of pregnancy, and the number of fetuses was similar until delivery. As a result of investigating the change of body weight according to the birth weight and growth stage after delivery, the birth weight of female and male was 9.2 ± 2.0 g and 9.8 ± 2.5 g, respectively. After that, until the 16th day, the female and the male showed similarly moderate weight gain, and then showed a rapid weight gain until the 21st day of lactation. With reference to the results of this study, it is expected to be used as basic data for determining the mating time of rodents and controlling pregnancy and fetal number.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.17-25
• /
• 2017

To resolve the problem of the temperature rise in LED or OLED lighting, until now a thick metal film has been used as a heat-sink. Conventionally, this thick metal film is made by the electroplating method and used as the heat-dissipating plate of the electronic devices. However, nowadays there is increasing need for a Cu metal film with a thickness of several hundred micrometers that can be formed by the dry deposition method. In this work, we designed and fabricated a Cu film deposition system where the heating element is separated from the ceramic crucible, which makes ultra-rapid deposition possible by preventing heat loss. In addition, the resulting induction heating also contributes to the high deposition rate. By tuning the various parameters, we obtained a $100-{\mu}m$ thick Cu film whose heat conductivity is high and whose thickness uniformity is better than 2%, while the deposition rate is as high as $1000{\AA}/s$.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.7
• /
• pp.999-1006
• /
• 2015

The endo-polygalacturonase gene (endo-pgaA) was cloned from DNA of Aspergillus niger SC323 using the cDNA synthesized by overlapping PCR, and successfully expressed in Saccharomyces cerevisiae EBY100 through fusing the α-factor signal peptide of yeast. The fulllength cDNA consists of 1,113 bp and encodes a protein of 370 amino acids with a calculated molecular mass of 38.8 kDa. After induction by galactose for 48 h, the activity of recombinant endo-PgaA in the culture supernatant can reach up to 1,448.48 U/mg. The recombinant protein was purified to homogeneity by ammonium sulfate precipitation and gel filtration column chromatography and subsequently characterized. The optimal pH and temperature of the purified recombinant enzyme were 5.0 and 50℃, respectively. The Michaelis-Menten constant (K_m) and maximal velocity (V_max) of the enzyme for pectin were 88.54 μmol/ml and 175.44 μmol/mg/min, respectively. The enzyme activity was enhanced by Ca²⁺, Cu²⁺, and Na⁺, and strongly inhibited by Pb²⁺ and Mn²⁺. The pectin hydrolysates were mainly galacturonic acid and other oligo-galacturonates. Therefore, these characteristics suggest that the recombinant endo-PgaA may be of potential use in the food and feed industries.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.8
• /
• pp.808-817
• /
• 2011

Because of its elevated cellulolytic activity, the filamentous fungus Trichoderma harzianum has a considerable potential in biomass hydrolysis applications. Trichoderma harzianum cellobiohydrolase I (ThCBHI), an exoglucanase, is an important enzyme in the process of cellulose degradation. Here, we report an easy single-step ion-exchange chromatographic method for purification of ThCBHI and its initial biophysical and biochemical characterization. The ThCBHI produced by induction with microcrystalline cellulose under submerged fermentation was purified on DEAE-Sephadex A-50 media and its identity was confirmed by mass spectrometry. The ThCBHI biochemical characterization showed that the protein has a molecular mass of 66 kDa and pI of 5.23. As confirmed by smallangle X-ray scattering (SAXS), both full-length ThCBHI and its catalytic core domain (CCD) obtained by digestion with papain are monomeric in solution. Secondary structure analysis of ThCBHI by circular dichroism revealed ${\alpha}$- helices and ${\beta}$-strands contents in the 28% and 38% range, respectively. The intrinsic fluorescence emission maximum of 337 nm was accounted for as different degrees of exposure of ThCBHI tryptophan residues to water. Moreover, ThCBHI displayed maximum activity at pH 5.0 and temperature of $50^{\circ}C$ with specific activities against Avicel and p-nitrophenyl-${\beta}$-D-cellobioside of 1.25 U/mg and 1.53 U/mg, respectively.