• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.22-29
• /
• 2002

Usually, much harmonics are included and cause harmonic loss of motor, torque pulsation, electro-magnetic noise and shock etc. by switching function of inverter when drive induction motor variableness inside. It applied partial resonant Buck converter and three phase voltage type SPWM inverter circuit to induction motor driving system in this paper that see to solve such problem. Changed operation condition variously to do input current of circuit that propose sine-wave by unit power factor almost and capacitor supplied bringing back to life voltage by power supply arranging properly assistance diode and electric power switching. Power factor and efficiency improved as that minimize variation of input at power supply voltage polarity reverse by that add voltage reversal function. Also, by using output filter, reduced harmonic of output line to line voltage components, and introduce state space analysis and forecast operation of rectifier. Such all items confirmed validity through simulation and an experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.211-220
• /
• 2003

This paper presents an implementation of direct torque control (DTC) of Reluctance Synchronous Motor (RSM) with an efficiency optimization. The equipment circuit in Reluctance Synchronous Motor which consider with iron losses is theoretically analyzed and the optimal current ration between torque current and exiting current analytically derived to drive RSM at maximum efficiency. For RSM, torque dynamics can be maintained even with controlling the flux level because a torque is directly proportional to the stator current unlike induction motor. The experimental results are presented to validate the applicability of the proposed method. The developed control system show high efficiency features with 1.0 Kw RSM having 2.57 ratio of d/q reluctance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1829-1838
• /
• 1989

This paper is proposed one method of the exact optimal switching pattern of Selected Harmonic Elimination(SHE) Pulse Width Modulation(PWM). It defined Harmonic Elimination Band (HEB) at Constant Voltage(CV) and sought all solutions which are included HEB. Then, it calculated the Generalized Klirr Factor(GKF) beling to this solution and decided the optimal switching pattern which is minimized GKF. This optimal switching solution is used as initial condition of Newto Raphson(NR) method of decided easily switching pattern at Variable Voltage(VV). We desined the inverter by Power Transister(PTR) and implemented variable speed drive of Induction Motor(IM) in order to verify the validity of this theoretical proposition, then shown this results by comparison and analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.371-376
• /
• 1998

This paper describes an approach to a speed estimation method to remove speed sensor of underwater robot's AC drive systems. AC motors have been widely used in the field of underwater robot's manipulator or propulsion system. Most of these AC motors for underwater use have usually filled oil to compensate the high pressure in deep-sea operation, where a resolver is adopted to feed back the speed of rotor But this kind of speed feedback devices gives rise to some defects arising from their mechanical complexity and numerous signal lines; a resolver needs 6 or 7 signal lines for proper operation. This paper presents a speed estimation method to improve these problems of induction motor, which is adopted as a prototype of AC motor. The proposed speed estimation method is based on the RFO(rotor flux orientation) vector control method of voltage-fed AC drives. Using the controller of voltage-fed AC drives, it is unnecessary to measure the voltage for the estimation of rotor speed, which reduces the effects of measurement error Numerical simulation is carried out to investigate the validity of the method and the effects of rotors resistance variation.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.313-316
• /
• 1989

A steady state analysis of a load commutated current source inverter which is widely used in high voltage - high power induction motor drive systems at present is presented and its related results are discussed. This analysis proposes a method by which we can determine the output capacitor playing a dominant role on the performance of the system. It is shown that the capacitance of output capacitors is mainly dependent on the range of frequencies that the inverter is operated in the load commutated state.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.737-738
• /
• 2006

This paper is proposed hybrid artificial intelligent controller for high performance of induction motor drive. The design of this algorithm based on fuzzy-neural network controller that is implemented using fuzzy control and neural network. The control performance of the hybrid artificial intelligent controller is evaluated by analysis for various operating conditions. The results of experiment prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.42-45
• /
• 2004

This paper is proposed an adaptive fuzzy controller of induction motor drive. The adaptive fuzzy controller approach for an estimate of the rotor time constant which is used to adjust the estimate of the slip angular speed. An estimate of the rotor time constant was obtained using an model reference adaptive system(MRAS) in a fuzzy control scheme. The rotor time constant was estimated by utilizing the rotor nut estimates. This paper is proposed the theoretical analysis as well as the simulation results to verify the effectiveness of the new method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.427-434
• /
• 2000

The paper proposes a zero speed start-up scheme of direct rector controlled induction motor drive without any torque jerk. At standstill condition, a method is derived to calculate a stator flux with only stator current. The programmable 3-stage low pass filters with programmable time constants is used in order to solute the problem of integration for stator flux estimation in the direct vector control mode. Due to the time delay of 3-stage low pass filter, the status flux decreases rapidly and also the torque jerk occurs during the transition from standstill mode to the direct rector control mode. A feedforward control strategy of the stator flux is suggested to prevent the torque jerk at start-up. Through results of simulation and experiment with 32 bit DSP, the performance of the start-up scheme is verified.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.375-380
• /
• 2003

In a conventional speed sensorless stator flux-oriented (SFO) induction motor drive, when the estimated speed is transformed into the sample-data model using the first-forward difference approximation, the sampled data model has a modeling error which, in turn, produces an error in the rotor speed estimation. The error is removed by the use of a low pass filter (LPF). As a result, the delay of the estimated speed occurs in transients by the use of the LPF. This paper proposes a method to estimate exactly the speed by using Luenberger observer to solve the problem of a conventional method.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.439-448
• /
• 2011

In this work the Multi-Domain model of an electric vehicle is developed. The electric domain model consists on the traction drive and allows including faults associated with stator winding. The thermal model is based on a spatial discretization. It receives the power dissipated in the electric domain, it interacts with the environment and provides the temperature distribution in the induction motor. The mechanical model is a half vehicle model. Given that all models are obtained using the same approach (Bond Graph) their integration becomes straightforward. This complete model allows simulating the whole system dynamics and the analysis of electrical/mechanical/thermal interaction. First, experimental results are aimed to validate the proposed model. Then, simulation results illustrate the interaction between the different domains and highlight the capability of including faults.