• Title/Summary/Keyword: induced polarization

Search Result 300, Processing Time 0.026 seconds

Polarimetric Fiber Pressure Sensor Incorporating Polarization-Diversity-Loop-Based Sagnac Interferometer (편광상이 고리 구조 기반 사냑 간섭계를 이용한 편광 간섭형 광섬유 압력 센서)

  • Ryu, Uh-Chan;Choi, Sung Wook;Lee, Yong Wook
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.29 no.7
    • /
    • pp.1-7
    • /
    • 2015
  • In this paper, we demonstrated a polarimetric fiber pressure sensor using a polarization-diversity-loop-based Sagnac interferometer(PDLSI) composed of polarization-maintaining fiber(PMF) and a fiber Bragg grating(FBG). In order to compare the pressure sensitivity for various kinds of PMF, three kinds of bow-tie PMF were employed as sensor heads. The maximum pressure sensitivity was measured as approximately -15.07nm/MPa, and an R2 value to represent sensor linearity was measured as ~0.992 at the sensor system using corresponding PMF over a pressure range of 0-0.3MPa. An FBG was utilized and located adjacent to the PMF segment for compensating temperature-induced errors in the measurement of pressure. The pressure sensitivity of the proposed sensor was improved by approximately four times compared with the previously reported pressure sensor based on polarization-maintaining photonic crystal fiber.

Effects of the external optical feedback on the DFB-LD modules for 2.5Gbps optical communication system (2.5Gbps 광통신용 DFB-LD 모듈에 대한 광궤환의 영향)

  • 박경현;이중기;한정희;조호성;장동훈;박철순
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.7
    • /
    • pp.1-14
    • /
    • 1996
  • Effects of the external optical feedback on the optical transmission characteristics were evaluated for 3 kinds of commercialized DFB-LD modules for 2.5Gbps optical communication systems. As a result, intensity noise induced by external optical feedback via generating the external cavity modes deteriorated the transmission performances of sthe DFB-LD modules as much as 1.5dB, 1.2dB, and 1.0dB for the maximum feedback ratio of -8.8dB which corresponds to the worst reflection along the fiber transmission line. Additional penalty of 0.5dB was occurrred when state of polarization of feedback light was adjusted. From the experiments evaluating the isolation ratio of the single polarization optical isolator, decrease of the polarization dependent isolation ratio as much as 10dB from that of specification and the effective isolation ratio as much as 20dB from that of specification was mjor cause of high sensitivity of DFB-LD modules to external feedback. It was suggested that polarization independent optical isolator or single polarization optical isolator with isolation ratio specification of more than 40dB is required for 2.5Gbps DFB-LD modules with complete suppression of external feedback effects.

  • PDF

Polarization multiplexing of holography memory in photopolymer (포토폴리머에서 편광방식을 이용한 홀로그래픽 메모리의 다중화)

  • Jeong, Hyeon-Seop;Kim, Nam;Sin, Chang-Won;Kim, Eun-Gyeong
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2007.07a
    • /
    • pp.275-276
    • /
    • 2007
  • A multiplex recording and reading technique in photopolymer are presented In order to record the polarization gratings, polarization-sensitive materials, in which linear birefringence is induced by irradiating the polarized light, are necessary. We checked orthogonal and independence of laser. The value of the photoinduced linear polarization had effect on diffraction properties in the holographic gratings. The grating strengths of two polarization are investigated and the relevant parameters for equal diffraction intensity readout are optimized.

  • PDF

Paeonol accelerates skin wound healing by regulating macrophage polarization and inflammation in diabetic rats

  • Zuyang Zhang;Tianhua Chen;Wei Liu;Jiepeng Xiong;Liangdong Jiang;Mingjiang Liu
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.27 no.5
    • /
    • pp.437-448
    • /
    • 2023
  • Diabetic ulcer is usually seen in people with uncontrolled blood sugar. Reportedly, many factors such as impaired glucose metabolism, and macrovascular and microvascular diseases caused angiogenesis disorders and delayed the healing of diabetic ulcers, thus affecting the body's metabolism, nutrition, and immune function. This study aimed to explore the effect of paeonol on skin wound healing in diabetic rats and the related mechanism. A rat model of diabetic ulcer was established. High glucose-treated mouse skin fibroblasts were co-cultured with M1 or M2-polarized macrophages treated with or without paeonol. H&E and Masson staining were used to reveal inflammatory cell infiltration and collagen deposition, respectively. Immunohistochemistry visualized the expression of Ki67, CD31, and vascular endothelial growth factor (VEGF). Western blot was used to detect interleukin (IL)-1β, tumor necrosis factor (TNF)-α, IL-4, IL-10, CD31, VEGFA, and collagen I/III. The expression of iNOS and arginase 1 was revealed by immunofluorescence staining. Paeonol treatment augmented collagen deposition and the expression of Ki67, CD31, VEGF, and macrophage M2 polarization markers (IL-4 and IL-10) and reduced wound area, inflammatory cell infiltration, and macrophage M1 polarization markers (IL-1β and TNF-α) in the ulcerated area. In vitro, paeonol treatment promoted M2-polarization and repressed M1-polarization in macrophages, thereby improving the repair of cell damage induced by high glucose. Paeonol accelerates the healing of diabetic ulcers by promoting M2 macrophage polarization and inhibiting M1 macrophage polarization.

Novel Long-period Fiber Grating devices for Monitoring the Deformation of Ship Hull (선체의 변형을 감지하기 위한 새로운 형태의 장주기 광섬유 격자 소자)

  • Sohn, Kyung-Rak
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.31 no.6
    • /
    • pp.761-767
    • /
    • 2007
  • We have developed novel optical-fiber sensors based on strain-induced long-period fiber gratings for monitoring the deformation of a hull. They have no external pressure for sustaining the mechanical formed gratings. The pressure, which provides a force to form the periodic grating along the single mode fiber, was realized by the bonding strength of a photopolymer. To reduce the polarization dependency of the sensors caused by the asymmetry structure of gratings, a Faraday Rotator Mirror (FRM) was utilized in this experiment. We have realized the polarization-insensitive function of the proposed sensors. The change of an external strain are measured by an optical spectrum analyzer. When the external stain increases. the attenuation at the resonant wavelength decreases and the loss peak was slightly shifted to the shorter wavelength.

Chronic Opisthorchis viverrini Infection and Associated Hepatobiliary Disease Is Associated with Iron Loaded M2-like Macrophages

  • Bility, Moses T.;Sripa, Banchob
    • Parasites, Hosts and Diseases
    • /
    • v.52 no.6
    • /
    • pp.695-699
    • /
    • 2014
  • Chronic Opisthorchis viverrini-induced hepatobiliary disease is associated with significant leukocyte infiltration, including activated macrophages; however, the polarization of infiltrating macrophages remains to be fully characterized. In this study, we characterized macrophage polarization and phenotype in chronic O. viverrini-induced hepatobiliary disease in humans and hamsters using gene expression and histochemical analysis. Chronic O. viverrini infection and associated hepatobiliary diseases were associated with iron loaded M2-like macrophages in both humans and hamsters. This study provides suggestive evidence that iron loaded M2-like macrophages promote hepatobiliary disease in chronic O. viverrini infection.

Geophysical Exploration on Unconformity-type Uranium Deposit in Athabaska Basin, Canada (캐나다 아타바스카 분지 부정합형 우라늄광상 물리탐사 사례)

  • You, Young-June;Kim, Jae-Chul
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2009.05a
    • /
    • pp.73-87
    • /
    • 2009
  • Geophysical survey for unconformity-type uranium deposit applied to this study area in Athabaska Basin, Canada were carried out airborne TEM and magnetic, resistivity-induced polarization (DC-IP), puser seismic reflection and well-logging method. The results of airborne survey interpreted the lithological boundary, geological structures, and conductors. Also, these results decided to main targets for ground DC-IP survey. The Low resistivity and the high chargeability slices of 3D modeling interpreted from DC-IP survey response for conductors related to hydrothermal alteration zones and fault-controlled graphitic zones occurring at the unconformity-type uranium deposit, and they confirmed by diamond drilling. Seismic results interpreted to lake bottom surface, alluvium layer and intra-sandstone faults. We suggest the resonable field data acquisition of DC-IP method on the land or the lake in Athabaska Basin.

  • PDF

Time-Domain Electromagnetic Coupling in Induced Polarization Surveys on a Uniform Earth (균질대지에 대한 시간영역 유도분극법에 전자기결합)

  • Kim, Hee Joon
    • Economic and Environmental Geology
    • /
    • v.19 no.3
    • /
    • pp.193-197
    • /
    • 1986
  • A simple and fast solution is derived to evaluate the effects of time-domain electromagnetic coupling in induced polarization surveys on a uniform earth. The simplified solution gives an explicit statement of the dependence of time-domain electromagnetic coupling on the model parameters, and yields sufficiently accurate results for most situations encountered in practice. The co-linear dipole-dipole and Wenner arrays are used as examples in this paper, but th numerical solution can be applied to any electrode configuration.

  • PDF

Negative Induced Polarization Effects for Two-Dimensional Structures (2차원 구조에 대한 음수의 유도분극 효과)

  • Kim, Hee Joon
    • Economic and Environmental Geology
    • /
    • v.21 no.2
    • /
    • pp.165-169
    • /
    • 1988
  • Negative induced polarization (IP) responses are examined for two-dimensional structures using a modeling technique with finite difference method. Percent frequency effect is used for IP parameter because it can be efficiently computed by a perturbation method. Thin conductive, polarizable overburden causes obvious negative IP responses on IP pseudosection. This fact means that IP responses from resistive, polarizable body below the overburden can be masked solely as a function of the resistivity distribution. Resistive, non-polarizable body below the overburden, however, can be detected by the negative IP responses.

  • PDF

Photosensitive Polymers: Effects of Photoreactive Group and UV-Exposure on Alignment of Liquid-Crystals on the Film Surface

  • Ree, Moon-Hor;Kim, Sang-Il;Lee, Seung-Woo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2000.01a
    • /
    • pp.41-42
    • /
    • 2000
  • Photosensitive polyimides containing cinnamoyl and coumarin side groups were synthesized in a high molecular weight, giving a good quality of films. Nematic liquid-crystal (LC) molecules on the film were aligned along the direction with an angle of $97-99^{\circ}$ respect to the polarization of ultraviolet (UV) light. The LC alignment was induced mainly by the photoaligned polymer chains made by the first UV-exposure even though the film was treated by multiple exposures with changing the polarization of UV light. From these results, it is concluded that the LC alignment on the film is induced by the photodimerization rather than the trans-cis photoisomerization.

  • PDF