• 한국환경보건학회지
• /
• 제39권6호
• /
• pp.522-531
• /
• 2013

Objectives: A field survey was conducted in a hog-raising industry in order to help develop personal protective equipment for workers which would secure the safety and the health of these workers. The attempt by this study will help enhance safety in the livestock industry and contribute to the advancement of the industry. Method: The study first selected a total of 111 workers from the hog-raising industry as research participants and designed a survey with questions on general characteristics, indoor and outdoor working environments, how the workers would in practice wear or purchase the working clothes, what needs to be improved in these new working clothes, how much the workers would be likely to accept the working clothes and protective equipment, and lastly, conditions of the communicable disease control overgarment. The collected data underwent frequency analysis and cross analysis with SPSS 21.0. Result: The research targets' average age was 50 years. Work efficiency by environmental factor was normal, but all age groups had experience of accidents (79.3%). Major wounded parts were under elbow and under knee. Protective equipment most commonly worn was helmet (83.4%), gloves (98.2%) and boots (99.1%), and satisfaction with them was normal at 3.41. Working clothing most commonly worn was old clothing (31.8%) and everyday wear (17.6%) and satisfaction with it was low. Considering the improvement of working clothing, they required attached pouches, elasticity and deodorization. The acceptability of improved working clothing was high at 69.2%. Conclusion: After problems have been addressed in relevant future research, what has been learned from the concerned study will be referred to as a useful basic reference when the relevant field works to develop high-quality working clothing and protective equipment for workers in the hog-raising industry.

• 복식문화연구
• /
• 제18권6호
• /
• pp.1063-1075
• /
• 2010

Studying awareness, importance, satisfaction, and wearing behavior of functional textiles for active silver generation related with gender and age is expected to contribute to clothing products development to improve and maintain their health and marketing strategy fit for user characteristics. For empirical research, a survey was developed and the aged 50 and above were 332 respondents. The results of the study are as follows. First, silver generation considered all the clothing comfort sensations important when wearing clothes, such as tactile sensation, clothing pressure sensation, thermal/wet sensation, and motion sensation in human physiological aspect. Also, stretchy fabrics were ranked first in awareness, the number of wearing times, and satisfaction of comfort functional fabrics. More than 30% of silver generation have fifteen items out of 36 functional clothes. Second, in analysis of awareness by gender on functional clothing products, women were more aware of health/safety-oriented fabrics than men were. Otherwise, men had more knowledge about the water-related properties of functional fabrics than women have, such as water/moisture absorptive and water-repellent/vapor permeable fabrics. While women have more indoor casual wear, men had more active sportswear. Also, women expressed a strong preference to the stretchy function of fabrics.

• 한국의류학회지
• /
• 제47권1호
• /
• pp.110-122
• /
• 2023

The COVID-19 pandemic increased people's time at home and caused an 80% increase in noise disputes between floors. The purpose of this study is to propose suitable materials for making indoor shoes (insoles) to minimize noise between floors. Subjects without back pain and leg-related disease (e.g. arthritis, etc.) from three different age groups (childhood, adolescence, and adulthood) were recruited for the study. Five polymer insole materials were considered: Chloroprene Rubber (CR foam), Ethylene Propylene Diene Monomer (EPDM foam), Natural Latex foam, Ethylene Vinyl Acetate (EVA foam), and Polyurethane (PU foam). From these materials, 20 combinations were prepared and randomly tested for noise and vibration. The results revealed a significant difference in noise and vibration levels based on the type of material used and the age of the subject. Nevertheless, all materials under consideration successfully reduced noise and vibration; in particular, type A-C greatly decreased. The CR foam material was especially effective at noise and vibration reduction (p<.01). This study suggests that adding insoles into socks that children wear at home could reduce noise vibration and disputes between floors.

• 대한치과기공학회지
• /
• 제32권4호
• /
• pp.403-415
• /
• 2010

Purpose: The purpose of this study was to examine the eyesight and life habits of college students in an attempt to provide some information on the protection of their eyesight. Methods: The subjects in this study were 311 students in the department of dental technology at a college of health, on whom a survey was conducted. A crosstabulation analysis was carried out to show the joint distribution of general characteristics and several variables involving the use of glasses or contact lenses and life habits. Results: 77.5% of the students currently wore glasses due to weak sight. 9.3% took an eye test on a regular basis, and 31.2% did that every six months. As for the length of the length of daily mean reading time, 55.3% spent one hour or less reading books. The most common distance between eyes and books during their reading(44.7%) was 21 to 25. Concerning a reading posture, the biggest group(54.3%) lay down or lay on their face while they read books. 45.0 % spent less than an hour watching TV per day on average, and 27.0% were on the computer for 30 minutes to less than an hour per day on average. The greatest group(63.0%) made use of basic indoor lighting when they were on the computer at night, and 62.1% saw eye doctors to take an eye test. In relation to how to protect eyesight, the biggest group(50.5%) spent less time being on the computer. Conclusion: As the eyesight of college students fails due to reading, TV, computer, and improper ways and posture of doing or using those things, every college definitely should provide education on eye health as one of general education courses.

• 한국환경보건학회지
• /
• 제13권2호
• /
• pp.25-33
• /
• 1987

This study was carried out to evaluate student exposures to dust in classroom of middle schools. A total of four schools, such as two in an urban and two in a rural area, were selected for this study. In this study, airborne dust concentrations were measured during a period from July 8 to July 18, 1986. Additional measurements of dust concentrations were conducted from November 4 to 7, 1986 to compare the results by seasonal variation. The results of this study were as follows. 1. Respirable dust concentrations were measured by both filtration method (C mg/m$^3$) and Digital Aerosol Monitor (cpm) to calculate anexchange factor K. K- value was 0.159 as follows. $K=\frac{c}{cpm} = \frac{2.71}{17.09} = 0.159$ 2. In summer when windows were opened, the concentrations of airborne respirable dusts measured by filter sampling method were 0.54-1.37 mg/m$^3$ in the morning and 0.79-1.75 mg/m$^3$ in the afternoon. Thus, higher levels were indicated in the afternoon. Meanwhile, the concentrations of airborne respirable dusts measured in winter were approximately twice as high as those in summer. 3. The highest dust concentrations were determined in School D which is a coeducational school with classroom of concrete floor. Walking roads in School D were not paved and students did not wear indoor-shoes. Dust levels in School D were approximately twice as high as levels in School B. All of the measured dust levels in four schools exceeded Korean Standard for outdoor air, 0.3 mg/m$^3$ for 24 hours. Results by Digital Aerosol Monitor indicated that there was no significant difference in dust levels among grades. The concentration of airborne dusts in the classroom was 1.5-3.0 times higher than that in the hall way. The concentration of airborne dusts during recess was 1.3-1.6 times higher than that during class. In winter, the dust concentrations during clean-up exceeded the permissible exposure limit, 10 mg/m$^3$ (as total dusts), for occupational exposures. 4. The concentrations of total dusts measured in winter were 1.5-2.4 times higher than those of respirable dusts measured simultaneously.

• 한국방사선학회논문지
• /
• 제14권3호
• /
• pp.313-318
• /
• 2020

라돈은 불활성기체로서 단원자분자이기 때문에 입자 하나의 크기가 원자 하나의 크기를 나타내며 이는 대략 반경 1~100 nm를 가지고 있다는 것을 의미한다. 따라서 마스크가 차단하는 일반적인 미세먼지, 초 미세먼지의 크기보다 작은 반경을 가지지만 일정 이상의 라돈의 흡입을 차단할 수 있다면 평소 실내착용을 통해 라돈의 흡입을 통한 피폭을 줄일 수 있을 것으로 사료된다. 이에 따라 일상생활에서 착용하는 마스크의 라돈 차단 효과를 알아보고자 한다. 각각의 마스크 별 라돈 감소율을 보면 면 마스크가 33.45%, 의료용 마스크가 33.50%, KF80 마스크가 35.12%, KF94 마스크가 37.72% 순으로 감소하였다. 면, 의료용 마스크가 KF 마스크보다 라돈 차단 효과가 다소 떨어지지만 그 차이는 크지 않아 마스크의 착용만으로도 공기 중 라돈의 유입을 일정 수준 차단할 수 있음을 알 수 있었다.

• 토지주택연구
• /
• 제12권2호
• /
• pp.91-97
• /
• 2021

본 연구는 에어샤워 시스템의 가동에 따른 5종의 의류(Dress Suit, Hiking Clothes, Knit, Cotton T-Shirt, Coat)의 미세먼지의 제거성능을 파악하고자 한 것으로 그 연구결과를 요약하면 다음과 같다. 첫째, 에어샤워 시스템 가동 실험결과, 미세먼지 제거율은 1회 가동시에만 평균 59.4%가 제거 되고 있었다. 특히, 2회 및 3회 가동시에는 68.5%에서 최고 73.3% 까지 제거율을 나타내고 있었다. 둘째, 5종류의 의류종류별 제거율은 Dress Suit 74.0% > Hiking Clothes 70.6% > Knit 63.3% > Cotton T-Shirt 50.5% > Coat 38.8% 순으로 나타났다. 즉, 의류 종류에 따라 코트 등 털 소재의 의류는 정전기 등의 원인으로 미세먼지 제거율이 다른 소재에 비해 적게 나타났지만 보통 의류인 경우는 50% 이상의 제거율을 보이고 있었다.

• 설비공학논문집
• /
• 제22권7호
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• 한국철도학회논문집
• /
• 제20권1호
• /
• pp.11-19
• /
• 2017

도시철도 차량의 운행은 터널 공기를 오염시키는 주된 원인이므로, 마모입자를 제거하는데 집진장치가 유용한 수단이 될 수 있다. 차량의 하부에 장착될 수 있는 집진장치의 설계조건을 파악하기 위하여 3차원 초음파 풍속계와 입자측정기를 사용하여 차량 하부의 풍속과 입자농도를 조사하였다. 2015년 2월 10일 수도권 지하철 5호선에서 운행되는 차량을 대상으로 측정하였다. 측정자료는 역 사이 노선의 형상(직선, 곡선)과 차량 속도패턴(가속, 정속 및 감속)을 구분하여 분석하였다. 차량속도도 함께 분석하였다. 직선 및 곡선 구간 모두 차량 하부의 평균 풍속은 차량속도의 약 30%이었고, 미세먼지($PM_{10}$) 농도는 약 $200{\mu}g/m^3$이었다. 감속구간에서 평균 $PM_{10}$ 농도는 가속구간에 비해 더 높았다.

• Asian Journal of Atmospheric Environment
• /
• 제4권2호
• /
• pp.97-105
• /
• 2010

A quantitative single particle analytical technique, denoted low-Z particle electron probe X-ray microanalysis (low-Z particle EPMA), was applied to characterize particulate matters collected at two underground subway stations, Jegidong and Yangje stations, in Seoul, Korea. To clearly identify the source of the indoor aerosols in the subway stations, four sets of samples were collected at four different locations within the subway stations: in the tunnel; at the platform; near the ticket office; nearby outdoors. Aerosol samples collected on stages 2 and 3 ($D_p$: $10-2.5\;{\mu}m$ and $2.5-1.0\;{\mu}m$, respectively) in a 3-stage Dekati $PM_{10}$ impactor were investigated. Samples were collected during summertime in 2009. The major chemical species observed in the subway particle samples were Fe-containing, carbonaceous, and soil-derived particles, and secondary aerosols such as nitrates and sulfates. Among them, Fe-containing particles were the most popular. The tunnel samples contained 85-88% of Fe-containing particles, with the abundance of Fe-containing particles decreasing as the distances of sampling locations from the tunnel increased. The Fe-containing subway particles were generated mainly from mechanical wear and friction processes at rail-wheel-brake interfaces. Carbonaceous, soil-derived, and secondary nitrate and/or sulfate particles observed in the underground subway particles likely flowed in from the outdoor environment by human activities and the air-exchange between the subway system and the outdoors. In addition, since the platform screen doors (PSDs) limit air-mixing between the tunnel and the platform, samples collected at the platform at the Yangjae station (with PSDs) showed a marked decrease in the relative abundances of Fe-containing particles compared to the Jegidong station (without PSDs).