• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.490-495
• /
• 2015

As flying robots are becoming popular, there are increased needs to use themforsuch purposes as parcel delivery, serving in restaurants, and stage performances. To control flying robots such as quad copters, localization is essential. In order to properly position flying robots, many techniques are in development, including IR (infra-red)-based systemswhich catch markers on a flying robot in order that it can position itself. However, this technique demonstrates only short coverage. Furthermore, localization from inertial sensors diverges as time passes. For this reason, this paper suggests a TWR (two-way ranging) based positioning technique. Despite the weaknesses in currently available TWR system, this paper suggests a self-positioning and outlier detection technique in order to provide reliable position information with a faster update rate. The self-positioning system sends a shorter message which reduces wireless traffic. By detecting and removing outlier measurements, a positioning result with better accuracy is acquired. Finally, this paper shows that the suggesting system detects outlierssequentially from less than half the number of anchors in localization system according to the degree of outlier in measurement and the noise level. By performing an outlier algorithm, better positioning accuracy is acquired as shown in the experimental result.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1298-1299
• /
• 2015

이동 로봇의 자기 위치 인식 방법으로 GPS를 많이 이용하지만 건물 내부공간에서는 위성신호 수신 장애가 있기 때문에 GPS 사용이 어렵다. 이에 대한 대안으로 다양한 형태의 실내 측위 기술에 관한 연구가 진행되어왔다. 최근에는 WiFi를 이용한 방법이 일부 상용화 되고 있으나 정밀도가 3~5m라는 한계가 있으며, LED 조명을 이용한 방법은 실용화 단계에 이르지는 못했지만 많은 연구가 진행되고 있다. 당 연구실에서도 LED조명을 기반으로 한 실내위치 인식 시스템을 개발하였으며, 지난 연구에서는 이를 이용한 이동로봇의 자율주행을 연구하였다. 본 연구에서는 지난 연구에 덧붙여 두개의 수신부를 이용하여 로봇의 방향인식오류 개선 및 이동 로봇의 자율주행을 보여주고자 한다. 제시된 시스템은 이동로봇, 조명제어장치 그리고 컴퓨터로 구성된다. 이동로봇은 상용화된 마이크로 마우스에 탑재된 조명신호 수신장치를 통하여 자신의 위치와 방향을 감지하며, 컴퓨터와의 Wi-Fi 통신으로 자신의 위치를 컴퓨터에 전송하거나 위치 명령을 수신한다. 컴퓨터에서는 수신 받은 이동로봇의 위치를 실시간으로 화면에 표시하며, 이동로봇에 전달할 위치명령을 사용자가 입력하는 기능을 제공한다. 사용자가 이동경로를 설정한 후 이동로봇으로 명령을 보내면 로봇은 자신의 위치와 목적지를 비교하며 자율주행을 하게 된다. 실험을 통하여 확인한 결과 지난연구의 방향인식의 문제점이 해결되어 제시된 시스템으로 실내공간에서도 이동로봇의 자율주행이 원만히 이루어짐을 확인하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.2
• /
• pp.91-99
• /
• 2013

An autonomous unmanned underwater vehicle is a type of marine self-propelled robot that executes some specific mission and returns to base on completion of the task. In order to successfully execute the requested operations, the vehicle must be guided by an effective navigation algorithm that enables it to avoid obstacles and follow the best path. Architectures and principles for intelligent dynamic systems are being developed, not only in the underwater arena but also in related areas where the work does not fully justify the name. The problem of increasing the capacity of systems management is highly relevant based on the development of new methods for dynamic analysis, pattern recognition, artificial intelligence, and adaptation. Among the large variety of navigation methods that presently exist, the dynamic window approach is worth noting. It was originally presented by Fox et al. and has been implemented in indoor office robots. In this paper, the dynamic window approach is applied to the marine world by developing and extending it to manipulate vehicles in 3D marine environments. This algorithm is provided to enable efficient avoidance of obstacles and attainment of targets. Experiments conducted using the algorithm in MATLAB indicate that it is an effective obstacle avoidance approach for marine vehicles.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.442-448
• /
• 2011

There are many research results about a self-localization technique of mobile robot. In this paper we present a self-localization technique based on the features of ceiling vision using a fisheye lens. The features obtained by SIFT(Scale Invariant Feature Transform) can be used to be matched between the previous image and the current image and then its optimal function is derived. The fisheye lens causes some distortion on its images naturally. So it must be calibrated by some algorithm. We here propose some methods for calibration of distorted images and design of a geometric fitness model. The proposed method is applied to laboratory and aile environment. We show its feasibility at some indoor environment.

• Journal of Korea Multimedia Society
• /
• v.19 no.9
• /
• pp.1647-1658
• /
• 2016

RGB+D database has been widely used in object recognition, object tracking, robot control, to name a few. While rapid advance of active depth sensing technologies allows for the widespread of indoor RGB+D databases, there are only few outdoor RGB+D databases largely due to an inherent limitation of active depth cameras. In this paper, we propose a novel method used to build outdoor RGB+D databases. Instead of using active depth cameras such as Kinect or LIDAR, we acquire a pair of stereo image using high-resolution stereo camera and then obtain a depth map by applying stereo matching algorithm. To deal with estimation errors that inevitably exist in the depth map obtained from stereo matching methods, we develop an approach that estimates confidence of depth maps based on unsupervised learning. Unlike existing confidence estimation approaches, we explicitly consider a spatial correlation that may exist in the confidence map. Specifically, we focus on refining confidence feature with the assumption that the confidence feature and resultant confidence map are smoothly-varying in spatial domain and are highly correlated to each other. Experimental result shows that the proposed method outperforms existing confidence measure based approaches in various benchmark dataset.

• Journal of Broadcast Engineering
• /
• v.24 no.3
• /
• pp.395-400
• /
• 2019

The CBS and the AEAS functionalities are defined in cellular systems and T-DMB systems, respectively. In the case that communication facilities are disabled in indoor environments, it is impossible for the residents to receive the emergency messages. In this paper, a novel collaborative technology of intelligent mobile robots is proposed, which relies on cooperative communications among the intelligent mobile robots. In order to improve the performance, the intelligent mobile robots exploit their location information. Simulation results confirm that the proposed method is very suitable for reliable emergency alert broadcast.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.2044-2059
• /
• 2022

Recent works have shown that the geometric constraint can be harnessed to boost the performance of CNN-based camera localization. However, the existing strategies are limited to imposing image-level constraint between pose pairs, which is weak and coarse-gained. In this paper, we introduce a pixel-level epipolar geometry constraint to vanilla localization framework without the ground-truth 3D information. Dubbed EpiLoc, our method establishes the geometric relationship between pixels in different images by utilizing the epipolar geometry thus forcing the network to regress more accurate poses. We also propose a variant called EpiSingle to cope with non-sequential training images, which can construct the epipolar geometry constraint based on a single image in a self-supervised manner. Extensive experiments on the public indoor 7Scenes and outdoor RobotCar datasets show that the proposed pixel-level constraint is valuable, and helps our EpiLoc achieve state-of-the-art results in the end-to-end camera localization task.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.449-455
• /
• 2022

In this paper, we propose a position measuring system using trilateration based on the illuminance of a light-emitting diode (LED). Three LEDs are located on the ceiling of the virtual space, and each fixed coordinate is inputted to the monitoring program, and Length to the illuminance sensor is drawn through the relational expression of the length and illuminance value from the respective LED. Based on the derived length, the trilateration method is used to find object location information in virtual space. By using the least square equation to minimize the error of the length drawn to trilateration, the error is reduced to the utmost. Unlike the existing indoor positioning system using visible light communication (VLC), the proposed system does not require synchronization between the transmitter and the receiver, so the system can be configured simply.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.775-778
• /
• 2007

로봇의 응용과 활용분야는 현 산업의 주요 이슈가 되고 있다. 현재 싱글로봇의 효율적인 운영을 넘어 넓은 공간에서 중복적인 공간 탐색을 최소화하기 위한 멀티 로봇 운영 기법은 중요한 연구 주제 중에 하나로 부각되고 있다. 멀티 로봇을 효율적으로 운영하기 위해서는 멀티 로봇 시스템의 각 싱글 로봇의 움직임을 파악하여 효율적으로 업무를 할당 할 수 있는 관리체계가 필요하다. 멀티 로봇의 업무 할당과 중복 탐색 최소화를 위해 본 논문에서는 중앙 서버와 RFID 시스템을 이용한 청소 멀티 로봇 운영 기법을 제안한다. 제안한 시스템은 로봇의 localization, navigation 및 mapping을 효율적으로 수행하기 위해 RFID를 활용하고 최적의 청소 공간 할당을 위하여 중앙 서버가 멀티 로봇을 효율적으로 관리한다. 청소 멀티 로봇 시스템에서는 싱글 로봇과 비교하여 효율적인 로봇의 운영을 보장할 뿐만 아니라 각 싱글 로봇의 상태와 주변 상태를 고려한 fault-tolerance를 제공함으로써 로봇 운영의 신뢰성을 보장할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.851-860
• /
• 2020

With an increase in the aging population and a rising social interest in health and welfare, studies to improve healthcare in the elderly are being actively conducted. This study attempted to improve the current design and manufacture of elevating electric wheelchairs to enhance user safety and convenience. Seat design based on the user's body shape, convenience while boarding or alighting, caster turning radius and, safety and stability features that prevent shaking when the user gets up or sits down were improved. A driving experiment was conducted to evaluate the operation of the indoor electric wheelchair designed and manufactured with these additional functionalities. During the test, the performance parameters evaluated were continuous driving time, turning radius, maximum lifting and lowering load, maximum lifting height, noise level, minimum distance sensing by the driving auxiliary sensor, ability to interact with server and app programs, and the duty cycle maximum error rate. The test confirmed that this improved electric wheelchair successfully met target parameters. In a future study, we will evaluate this improved electric wheelchair from a user's perspective for its usability parameters, such as satisfaction, convenience and stability.