• Journal of the Korea Furniture Society
• /
• v.20 no.2
• /
• pp.115-121
• /
• 2009

This study examined the emission characteristics and psychological effects of volatile organic compounds (VOCs) emitted from wooden boards made of Pinus densiflora and Chamaecyparis obtusa, conifer commonly found in korean forests. Boards made of those species were used to decorate interior of a test room. Different proportions of interior (20%, 40%, 60%, 80% and 100% against the entire interior of the room) were decorated. Electroencephalogram and VOCs in the test room were measured 24 hours after interior decorated. As the results, when 40% of interior of the room decorated with both species of boards, the largest amount of alpha wave was detected. For board made of P. densiflora, as the proportion of interior decorated increased both natural VOCs(NVOCs) and anthropogenic VOCs(AVOCs) were increased. on the other hand, When interior decorated with board made of C, obtusa, little differences in VOCs with different area of interior decorated was detected. Board made of P. densiflor emitted a slightly higher amount of AVOCs than boards made of C. obtusa. NVOCs emitted from board made of P. densiflora was three to fifteen times more than NVOCs emitted from board made of C. obtusa.

• Journal of Environmental Science International
• /
• v.30 no.1
• /
• pp.45-55
• /
• 2021

In this study, the odor of the parts and the odor of the surrounding environment were classified and verified. In order to increase the reliability of odor quantitative/qualitative analysis, the selection criteria for 5 sensory evaluators were established, and the n-Butanol control solution for each odor intensity was periodically trained to recognize the odor intensity before sensory evaluation. In addition, although various odor thresholds have been used through several studies, verification of whether the odor intensity value obtained through GC/MSD analysis is similar to the degree to which a person directly smells and feels it. It is important to select the odor threshold that has the best correlation with the odor intensity calculated by the person smelling the odor. Finally, sampling and measuring flowing airflow and temporary odors such as odor component analysis was experimentally difficult due to limited collection space and differences in concentration of generated components. In this study, a quantitative analysis was made possible by using the low temperature concentration (cooling) trap method. Through this, it was confirmed that the correlation with the actual odor intensity was not caused by the product itself, but by the environmental factor discharged from the product after creating the odor environment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.94-100
• /
• 2024

Recently, as interest in personal hygiene has increased due to the community spread of COVID-19 and variant viruses, fixed and potable UV germicidal equipment to sterilize indoor spaces and hand-held UV germicidal equipment to sterilize household items such as masks and mobile phones are continuously being developed and sold. However, the development and sales of the product are difficult because appropriate testing methods have not yet been established. In this situation, if an uncertified product is distributed in the market, it can cause serious harm to consumers. In this study, we investigate the photobiological risks and safety devices against UV exposure of UV germicidal equipment distributed domestically, and propose appropriate test methods for portable UV germicidal equipment based on the research results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.415-424
• /
• 2019

In this paper, a minimum rotation radius was designed and fabricated to overcome the threshold so that elderly or disabled people who have difficulty moving can move and transfer safely and conveniently in a narrow room. In the indoor environment, where the sedentary culture develops, this study aimed to provide convenience for passengers with fracture diseases, geriatric diseases, and other knee and waist diseases. First, links, seats, armrests, covers, motors, batteries, chargers, controllers, etc. were attached to the frame so that they could be moved and lifted indoors. The product design and structure were designed considering the user's environment and physical characteristics, and IoT functions were added. A driving experiment was performed to confirm the operating performance of the manufactured indoor moving and lifting wheelchair. The performance tests, such as continuous running time, turning radius, maximum actuator load, maximum lift height, sound pressure level, minimum sensing distance of the driving aid sensor, interworking of server and app programs, device compatibility, and duty cycle error rate, were performed. As a result of the test, the built-in wheelchair could achieve the performance test target of each item and operate successfully.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.11-17
• /
• 2022

In this paper, a model that can increase the efficiency of work in arranging interior furniture by applying augmented reality technology was studied. In the existing system to which augmented reality is currently applied, there is a problem in that information is limitedly provided depending on the size and nature of the company's product when outputting the image of furniture. To solve this problem, this paper presents an AR labeling algorithm. The AR labeling algorithm extracts feature points from the captured images and builds a database including indoor location information. A method of detecting and learning the location data of furniture in an indoor space was adopted using the CNN technique. Through the learned result, it is confirmed that the error between the indoor location and the location shown by learning can be significantly reduced. In addition, a study was conducted to allow users to easily place desired furniture through augmented reality by receiving detailed information about furniture along with accurate image extraction of furniture. As a result of the study, the accuracy and loss rate of the model were found to be 99% and 0.026, indicating the significance of this study by securing reliability. The results of this study are expected to satisfy consumers' satisfaction and purchase desires by accurately arranging desired furniture indoors through the design and implementation of AR labels.

• Archives of design research
• /
• v.17 no.1
• /
• pp.163-178
• /
• 2004

In this study, in order to achieve the before-mentioned study purpose, the importance of developing the new product, the relationship with the design, and the design element for developing the new product were considered. In order to extract the importance of the design element which is applied to the development of the new product design, the research model about the induction of the priority was created, the evaluation items were instituted, and the demonstrative research approach was performed in order to recognize the relationship among those elements. Firstly, in the process of selecting the items for the application, 14 evaluation elements which were extracted through the advanced study data were grouped in 4 kinds of dimensions, and the properties which are related with the Digital TV product were composed up of 36 items. Through the factor analysis, by decreasing the detailed standard for the evaluation of 36 items, the parsimony was secured, and the characteristics which the various items contain induced into one factor. Secondly, the detailed factors which were united into one factor went under the paired comparison as one by one through AHP again, and then the importance degree was generated. First of all, as the first stage of AHP, the decision making factors which affect the whole achievement of purpose of the decision making were classified as in a hierarchical style. From these research results, it was known that the functional factor and esthetic factor in the process of designing the new product are the major affecting variables, and it was confirmed that in case of the Digital TV products group, the factors such as the high quality of picture, big screen, user interface, sound, product reliability, style, size, indoor reproduction, and guarantee are the main factors which influence the need of the consumers in purchasing products.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.9
• /
• pp.53-62
• /
• 2020

Product recommendation services that have been researched recently are only recommended through the customer's product purchase history. In this paper, we propose the digital signage service through customers' behavior pattern analysis that is recommending through not only purchase history, but also behavior pattern that customers take when choosing products. This service analyzes customer behavior patterns and extracts interests about products that are of practical interest. The service is learning extracted interest rate and customers' purchase history through the Wide & Deep model. Based on this learning method, the sparse vector of other products is predicted through the MF(Matrix Factorization). After derive the ranking of predicted product interest rate, this service uses the indoor signage that can interact with customers to expose the suitable advertisements. Through this proposed service, not only online, but also in an offline environment, it would be possible to grasp customers' interest information. Also, it will create a satisfactory purchasing environment by providing suitable advertisements to customers, not advertisements that advertisers randomly expose.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.69-70
• /
• 2003

최근 실내공기 질(IAQ : Indoor Air Quality)에 관한 인식이 높아지고 있으며 환경개선에 상응하는 기술 개발의 중요성이 크게 부각되고 있다. 실제 산업체에서는 여러 가스정화기술들이 오염물질제거에 이용되어 왔고, 그 한 분야인 N.T.P(Non-thermal plasma Process) 공정도 다양한 각도에서 연구가 수행되어 왔다. 그러나, 이 기술의 실용화를 위한 설계변수 개념의 연구는 부족한 실정으로, 이에 본 연구는N.T.P 공정에 의한 가스정화의 반 경험식 도출과 이를 이용한 성능 평가 고찰이 주목적이다. 또한, 반응기 통과 후 나오는 부산물을 동정하여, 차후 후단에 사용할 촉매를 결정 하고자 한다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.453-456
• /
• 2005

In recent years, the demand of a silent indoor air-conditioner is the essential research filed when the product is developed. In this study, through the design modification of the noise and vibration source, the noise and vibration level of the package air-conditioner is reduced. The modal analysis of the motor bracket is performed by FEM. To find the most suitable shape of the motor bracket, Design of Experiments is applied.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1255-1260
• /
• 2006

This present study analyzed temperature depreciation ratio of window inside surface by KS F 2295 'Procedure for determining fenestration product condensation resistance values'. it estimated window indoor surface condensation due to variable environmental condition. Performance of condensation resistance by using temperature depreciation ratio until applied Low-e and Ar glazing improved about 45% from 24 mm clear. Temperature depreciation ratio by KS F 2295 considers analytic index of window condensation due to variable boundary condition.