• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.588-594
• /
• 2015

Although GPS technology for location positioning system has been widely used, it is difficult to be used in intelligent transport systems, due to the large positioning error and limited area for receiving radio signals. Thanks to the rapid development of LED technology, LED lights become popular in many applications. Especially, visible light communications (VLC) has raised a lot of interests because of the simultaneous functioning of LED illumination and communication. Recent studies on positioning system using VLC mainly focused on indoor environments and still difficult to satisfy positioning accuracy and simple implementation simultaneously. In this paper, we propose a positioning system based on VLC using the coordinate information of LEDs installed on the road infrastructure. Extracting the LED signal, obtained through VLC, from the easily accessible camera image, it is possible to estimate the position of the car on the road. Simulation results show that the proposed scheme can achieve a high positioning accuracy of 1 m when large number of pixels is utilized and the distance from the LED light is close.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.47-49
• /
• 2022

IPS is an indoor positioning system that replaces GPS, which is less accurate due to walls and roofs inside buildings. Radio signals such as Wi-Fi are used instead of satellite signals, and complex methods are being used to increase accuracy. In this paper, we present a more efficient positioning method than before by applying high-level signals to high-accuracy fingerprint techniques. A radio map is configured with high-level signals collected by utilizing Wi-Fi APs, which are more than in the past. The suitability of use was confirmed by analyzing the pattern represented by the configured radio map for each location.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.175-182
• /
• 2020

This paper introduces a study to estimate the user altitude in need of rescue in an emergency. The altitude is estimated by using the barometric pressure sensor embedded in the smartphone. Compared to GPS, which is degraded in urban or indoor environments, it has the advantage of not having spatial restrictions. With the endless development of smartphone hardware, it is possible to estimate the absolute altitude using the measured value if only the bias of the embedded barometric pressure sensor is applied. The altitude information of the person in need of rescue in an emergency is a great help in reducing rescue time. Since time is tight, we propose online calibration that provides the barometric pressure sensor bias used for altitude estimation through database. Furthermore, experiments were conducted to understand the characteristics of the barometric pressure sensor, which is greatly affected by wind. At the end, the altitude estimation performance was confirmed through an actual field tests in various floors in the building.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1368-1373
• /
• 2015

Recently, There is increasing interest in the IoT(Internet of Thing) as intelligent information service that enables communication between people and things based on internet. In particular the demand for indoor location-based services with the development of smart devices is rapidly increasing. Using the RSSI signal that is provide to the BLE(Bluetooth Low Energy) for Indoor location information measurement calculates distance information between beacon and mobile terminal. However, simply using the RSSI signal to the distance measurement has a difficult to get the indoor location information due to the influence of the signal interference and the weather. In this paper, by performing an operation for obtaining a reliable distance information from the signal information of iBeacon we propose a system for providing reliable indoor location.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.774-783
• /
• 2012

A simple, accurate, secure, long-lasting, and portable hybrid positioning system is proposed and designed in this paper. It consists of a lighting LED that generates visible light data corresponding to position information of a target and a Zigbee wireless network communication module with low power, security, and service area expansion characteristics. Under an indoor environment where there is 23.62m distance between an observer and the target, the presented hybrid positioning system is tested and is verified with the functions of Zigbee three hop wireless networking and visible light communication (VLC) scheme. The test results are analyzed and discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.241-243
• /
• 2015

Recently, There is increasing interest in the IoT(Internet of Thing) as intelligent information service that enables communication between people and things based on internet. In particular the demand for indoor location-based services with the development of smart devices is rapidly increasing. If iBeacon of BLE(Bluetooth Low Energy) is made available to provide a basic signal for the indoor location information measurement then reliability of Indoor location information for unreliable signal data for a variety of reasons, such as signal interference is significantly lowered. In this paper, Proposes a technique for obtaining an effective and reliable location information via genetic operations in order to obtain reliable location information from the iBeacon signal information.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1697-1703
• /
• 2014

In this paper, we propose an indoor RSSI (received signal strength indication)-based localization method that uses virtually overlapped visible light with an indoor LED lighting system. In our system, a photodiode (PD) measures the RSSI from LED lamps that blink in one row or column units. Subsequently, the RSSI is used to obtain the horizontal distances between the LED lamps and the receiver with the predetermined characteristics curve, R-D curve, that represents the relation between the RSSI and the horizontal distances. When the controlled LED lamps blink in one row or column units, the R-D curve at the border of the LED lamps is different because of the weak lighting, which results in the position sensing error of the receiver. The deviation of the optical power of each LED also causes the error. To solve these problems, we propose a method that overlaps the visible light through the numerical operation at the receiver side without any modification of the light source side. Our proposed method has been simulated in a room measuring $1.2{\times}1.2{\times}1.8m^3$ considering the effect of the error on the optical power of the LED. The simulation result shows that the proposed method eliminates the error condition with the R-D curve and achieves an average positioning error of 13.4 mm under the error rate 3% of the optical power.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.262-272
• /
• 2015

In particular, for a practical mobile robot team to perform such a task as that of carrying out a search and rescue mission in a disaster area, the network connectivity and localization have to be guaranteed even in an environment where the network infrastructure is destroyed or a Global Positioning System is unavailable. This paper proposes the new collective intelligence network management architecture of multiple mobile robots supporting seamless network connectivity and cooperative localization. The proposed architecture includes a resource manager that makes the robots move around and not disconnect from the network link by considering the strength of the network signal and link quality. The location manager in the architecture supports localizing robots seamlessly by finding the relative locations of the robots as they move from a global outdoor environment to a local indoor position. The proposed schemes assuring network connectivity and localization were validated through numerical simulations and applied to a search and rescue robot team.

• Journal of Korea Multimedia Society
• /
• v.22 no.2
• /
• pp.186-193
• /
• 2019

Visible light communication technology is being studied and developed in various ways due to advantages such as high transmission speed, excellent positioning and higher security. However, existing visible light communication systems have difficulties in entering the market because they use special transmitters and receivers. We will overcome the difficulty if we develope a VLC system that uses a conventional LED light as a transmitter and a smartphone camera as a receiver. What matters is that LED lights include a scatter filter to prevent glareness for human eyes, but the existing VLC(Visual Light Communication) method can not be applied. In this paper, we propose a method to encode data with On / Off patterns of LEDs in the lighting with $M{\times}N$ LEDs. We defined parameters like L-off-able and K-seperated to facilitate the recognition of On / Off patterns in the diffused Lights. We conducted experiments using an LED lighting and smart phones to determine the parameter values. Also, the maximum transmission rate of our encoding technique is mathematically presented. Our encoding scheme can be applied to indoor and outdoor positioning applications or settlement of commercial transactions.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.307-308
• /
• 2021

2020년 7월 정부는 포스트 코로나 시대를 선언하며, 한국판 뉴딜 정책을 발표하였다. 한국판 뉴딜은 디지털인프라 구축, 비대면 산업육성, SOC 디지털화를 기본방향으로 내세웠으며 빅데이터, 인공지능(AI), 사물인터넷(IoT) 등 4차산업 핵심기술의 육성방안을 제시하였다. 최근 인천공항은 한국판 뉴딜 정부정책에 부응하기 위해 인천공항 K-뉴딜 프로젝트를 추진 중이며, 세부 전략과제로 자산관리의 디지털전환을 위한 IoT기반 스마트 자산관리시스템을 구축 중이다. IoT기반 스마트자산관리시스템은 인천공항에 위치한 실내외 이동형 자산에 대해 끊김없는 위치정보를 제공하는 시스템으로 기존 시스템(RFID) 대비 약 4억 원의 인적, 물적 자원을 절감하는 효과를 나타낼 것으로 예상된다. 본 논문에서는 IoT기반 스마트 자산관리시스템의 핵심기술인 실내외 연속측위 스마트 트래커와 네트워크의 구성, 저전력 위치정보 제공방법을 제시한다.