• 한국도서관정보학회지
• /
• 제40권3호
• /
• pp.137-156
• /
• 2009

이 논문에서는 신학 학술지에 실린 논문을 저자가 직접 색인한 비통제색인어와 LCSH의 통제색인어의 색인어의 형태와 의미를 기존의 색인어 관련 지침과 비교하여 분석하여, 보다 정교한 색인시스템을 구축하기 위해서 개선되어야 할 점들을 제안하였다. 저자는 비통제색인어에서는 명사구와 복합어를 중심으로 분석하였는데, 신학적 지식과 더불어 색인 기법에 대한 지식도 갖추어야 정확한 색인을 부여할 수 있을 것으로 판단하였다. 그리고 LCSH에서는 불필요한 색인어와 괄호 한정어 등을 분석하였는데, 신학적 지식보다는 LCSH 자체의 주표목과 세목의 구조에서 오는 비일관성과 오류들을 확인할 수 있었다.

• 환경영향평가
• /
• 제19권2호
• /
• pp.205-213
• /
• 2010

The purpose of this research is to analysis the application of the ISG(Index of Streetscape Greenness) in EIA through case study of Seoul. ISG is a new index which directly expresses human's perceptions of plants in a street and is defined as the area ratio of which leaves of plants occupy an eye-level view of a person standing on the center line of a street. In this research the 42 cases of 3 step reports such as plans, drafts, and final reports which had been passed through the EIA procedure of Seoul were analyzed. The results are as follows: In the drafts frequent mistakes or errors such as unsuitable picture composition, unsuitable sample points, inconsistency of the simulation result with the planting plan, and insufficient numbers of analysis were found, but almost of them were corrected in the final reports. In the most of final reports, the 30% of minimum requirement was satisfied. At all cases the changes of the ISG values were clearly positive. Finally the average current ISG was 19.6%, meanwhile the average proposed ISG was 35.4%. It was verified that the ISG is very practical index to promote green streetscape, but in order to guarantee an achievement a thorough investigation of reports are needed.

• 정보관리학회지
• /
• 제33권3호
• /
• pp.7-29
• /
• 2016

연구자 성과 평가를 위해 널리 사용되는 h-지수는 일관성 부족 문제와 공저자 수를 고려하지 않는다는 문제를 가지고 있다. 이를 극복하기 위해 h-지수와 g-지수, 그리고 공저 보정 방안을 검토하고 2004년부터 2013년 사이의 실제 KCI 데이터를 대상으로 분석해본 결과는 다음과 같다. 첫째, 일관성 결여 문제를 해소하기 위해서는 g-지수를 사용하는 것이 더 바람직하다고 판단된다. 둘째, 연구 성과의 양적인 측면과 질적인 측면을 한꺼번에 반영하는 복합 지수라는 h-지수와 g-지수의 고유한 특성을 유지하기 위해서는 반드시 공저를 보정하여 지수를 측정해야 한다. 셋째, 공저자 수로 나눈 인용빈도를 사용하는 $h_C$-지수와 $g_C$-지수를 적용하면 단독 저술 비중이 높은 인문학 분야 연구자도 공정하게 평가할 수 있고, 특정 분야나 특정 기관에 속한 연구자가 상위 순위를 과점하는 현상을 방지할 수 있다.

• 한국지진공학회논문집
• /
• 제27권6호
• /
• pp.265-273
• /
• 2023

This study proposes a methodology for the regional seismic risk assessment of structural damage to buildings in Korea based on evaluating individual buildings, considering inconsistency between the administrative district border and grid lines to define seismic hazard. The accuracy of seismic hazards was enhanced by subdividing the current 2km-sized grids into ones with a smaller size. Considering the enhancement of the Korean seismic design code in 2005, existing seismic fragility functions for seismically designed buildings are revised by modifying the capacity spectrum according to the changes in seismic design load. A seismic risk index in building damage is defined using the total damaged floor area considering building size differences. The proposed seismic risk index was calculated for buildings in 29 administrative districts in 'A' city in Korea to validate the proposed assessment algorithm and risk index. In the validation procedure, sensitivity analysis was performed on the grid size, quantitative building damage measure, and seismic fragility function update.

• 한국BIM학회 논문집
• /
• 제12권1호
• /
• pp.23-34
• /
• 2022

In the current 2D-based design, design reliability is lowered due to interference and inconsistency between plans, errors in drawings and quantities, etc. At the time of transition to BIM-based 3D design, it is necessary to expand the reliability and usability of BIM by eliminating these errors from the design stage through securing the quality of the BIM digital model. Therefore, in the railway infrastructure design stage, the quality management process and standards of the BIM digital model were defined and quality management index were developed. Based on the rule extracted from the quality management index, a pilot quality management was conducted in connection with the commercial Model-Checker rule, problems and improvement plans were derived, and a rule-based automated quality management plan was prepared.

• Journal of Forest and Environmental Science
• /
• 제29권4호
• /
• pp.282-291
• /
• 2013

Rapid loss in viability of neem (Azadirachta indica A. Juss.) seed is a major problem. Present effort was undertaken for developing a set pattern for assessing of viability and vigour in seed of various mother tree age of neem (Age I-06 years, Age II-15 years, Age III-25 years and Age IV->30 years old). Various viability test viz. triphenyle tetrazolium chloride test, electrical conductivity, excised embryo test, and germination test have been performed on seeds obtained from mother tree age classes. Inconsistency was observed with the TTC and EC test in germination of seed in laboratory as well as nursery. While various vigour tests viz. cold test, chemical stress test (methanol stress test), and accelerated ageing test alongwith ageing index, germination test (G%, MGT and GV) and various seedling growth parameters like seedling length (cm), number of leaves, collar diameter (cm), total biomass (g) alongwith mathematical indices i.e. vigour index, sturdiness quotient, volume index, quality index, root shoot ratio in nursery as well have been taken for study and showed better consistency. On the basis present study results of various viability and vigour test indicated that mother tree age class II performed better in comparison to others and it can be recommended for seed collection. Further it is also recommended that viability of neem seed may be assessed using various laboratory tests like excise embryo test and germination test (G%, MGT and GV) and vigour test may be taken preferably by cold germination test, chemical (methanol) stress test, accelerated ageing test in laboratory and germination alongwith various seedling growth parameters seedling length (cm), number of leaves, collar diameter (cm), total biomass (g) alongwith mathematical indices like Vigour Index, Sturdiness quotient, Volume Index, Quality index, root shoot ratio in nursery as discussed in this study.

• 융합경영연구
• /
• 제11권2호
• /
• pp.57-68
• /
• 2023

Purpose: This study aims to improve the evaluation system for selecting supportive housing applicants, addressing inconsistency, lack of health and care evaluation, and the need for a quantitative evaluation tool. Proposed improvements include a consistent evaluation index and items for each resident type, selecting suitable residents for independent living and community integration. Research design, data and methodology: This study analyzed the supportive housing selection checklist provided by the Seoul Metropolitan Government, the supportive housing ordinance, and the SH Corporation's operation guidelines. Results: Study finds current supportive housing tenant selection system lacks consistency and proposes improvements. The same terms should be used for the same evaluation items, health and care evaluation items should be added for all tenants, and a quantitative evaluation tool should be used. Consistent evaluation index and items should be created for each resident type in the same evaluation area. The aim is to select suitable tenants with potential for independent living and community integration. Conclusions: This study improves the evaluation system for selecting supportive housing applicants by addressing inconsistencies and adding essential evaluation items related to health and care. While the study is significant, future research should focus on developing quantitative evaluation tools for all detailed items.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.687-688
• /
• 2015

The objective of identifying the cause of inconsistency in determining priority of educational facility maintenance, any related factors were thoroughly identified and tested, to see if it has any effect on decision-making process in resource allocation for educational facilities. On the assumption that 'the more there are to be repaired/maintained and deferred, the higher the relevant cost will be, this will lead to a significant social loss. Accordingly, this study established a framework of determining resource allocation priority based on deferred maintenance and its related expenses. For doing so, it was required to determine relative ranking in terms of resource allocation within a pre-assigned school district, in consideration of the criticality of each deferred maintenance attribute/variable.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.417-422
• /
• 2006

This study is an attempt to investigate Korea & U.S Company Corporate ethics Programs & System through the Corporate Favorite Index and researches. Design of Ethics Management Model on how in contemporary Corporate & society. today, There many Corporate & social ethics problems in the post knowledge society based monetary circulation. We can design Ethics Management Model the key to solving today's inconsistency of Capitalism & Corporate ethics problems from Integrated & analysis our Corporate Ethics Management. This is the purpose of this thesis.

• Steel and Composite Structures
• /
• 제4권6호
• /
• pp.419-435
• /
• 2004

The safety level of a structural system designed per code specifications can not be inferred directly from the reliability of members due to the load redistribution and nonlinear inelastic structural behavior. Comparison of the system and member reliability, which is scarce in the literature, is likely to indicate any possible inconsistency of design codes in providing safe and economical designs. Such a comparative study is presented in this study for moment resisting two-dimensional steel frames designed per AISC LRFD Specifications. The member reliability is evaluated using the resistance of the beam-column element and the elastic load effects that indirectly accounts for the second-order effects. The system reliability analysis is evaluated based on the collapse load factor obtained from a second-order inelastic analysis. Comparison of the system and member reliability is presented for several steel frames. Results suggest that the failure probability of the system is about one order of magnitude lower than that of the most critically loaded structural member, and that the difference between the system and member reliability depends on the structural configuration, degree of redundancy, and dead to live load ratio. Results also suggest that the system reliability is less sensitive to initial imperfections of the structure than the member reliability. Therefore, the system aspect should be incorporated in future design codes in order to achieve more reliability consistent designs.